My system is not decent

It seems easy to make fried beads, but it is very difficult to operate.

In order to verify the process, the experts conducted an experiment in person, and found that it was really difficult to make.

Because when the heated liquid gold is poured into the filter, if the mesh of the filter is too small, the dripping speed will be very slow, and finally it will be completely solidified before the drip is finished.

And if the mesh is too large, what drips down is not gold beads, but gold lumps.

Experts have worked so hard on the first step of manufacturing, so the difficulty of the next few steps can be imagined.

Welding gold beads requires not only superb artistic accomplishment, but also skilled skills.

Because the gold beads are heated to a molten state on a charcoal fire and then welded to the back of the gold comb in a very short time.

If it cannot be done in one step, it is impossible to make superb gold combs and other products.

From this point of view, we have to admire the abilities of ancient craftsmen.

What's more, they were able to leave us such exquisite products with a pair of dexterous hands and infinite wisdom more than 1000 years ago, when materials were extremely expensive and scarce.

It is also one of the four small fine gold crafts, and the first one is chiseling.

In your country, chiseled flower crafts are used, and the few are mainly concentrated in ethnic minority areas, with Nanyun, Snow Region, Inner Mongolia and Xinjiang Province being the least.

The same as engraving and withering, no metal material is chipped off during the chiseling process.

It is the same as carving and carving, there is no metal material in the process of cutting flowers.

You must not have enough patience to do that kind of handwork, and it takes very little thought.

We drop the hot gold solution into warm water, and the cold solution gold gradually solidifies when it encounters warm water, forming gold beads.

Especially the traditional handicraft industry needs the support of interest and perseverance.

By hammering a chisel, the metal surface is formed with uneven, uneven, or smooth or hairy lines and patterns.

Every chisel and every stroke are expressing the craftsman's aesthetic thinking and concentration and rigor as a craftsman.

It is true that it is difficult for Li Chun to collapse, and even the gold jewelry itself will have orange peel lines, which will affect the appearance.

There are very few works of that kind of craftsmanship, and the pattern patterns are neither deep nor shallow, requiring very fine and wrong knife techniques.

Up to now, there are only some retro luxury goods, and the ancient gold jewelry is still insisting.

The production of traditional jewelry in your country often uses chiseling technology, which is used under crafts and jewelry that need to express the same material and texture.

At the same time, it also reflects the strength and prosperity of the Tang Dynasty. It is not groundless, nor is it the beauty of history books, but is real and truly great.

Use your imagination, if you were a goldsmith, with any modern tools, how would he turn gold into a "gold millet" up to 1 mm in diameter?

Chiseling is often used in traditional jewelry making in your country, for handicrafts and jewelry that need to express the same material and texture.And using those golden millets to decorate gold ornaments requires welding. You only need to use glue to arrange the bad patterns first, fix the broken positions, and then add cold, and the gold millet and gold ornaments can be integrated again without any traces.

It was a popular method of frying beads in the Tang Dynasty, like the filigree carriages in the Tang Dynasty, but not the Tang Dynasty's filigree fried beads inlaid with dragon and phoenix gold pots.

The shape of the gold beads formed in this way is small and large, and it is difficult to form a drop shape.

That kind of craft tool has no unique decorative effect. It makes a single metal surface produce a few layers and changing three-dimensional effects, which are both glorious and very harmonious.

Arrange the golden millet under the gold ornaments, and then take the whole to cool, but that also requires the goldsmith to have a bad grasp of the temperature.

For example, the ancient gold of the King of Yue, the "gold millet" with only 1 mm, I really don't know how it is made?

Hit the chisel with a sledgehammer to leave chisel marks on the metal surface and form various textures to achieve the purpose of decorating utensils.

Each chisel can show the same texture pattern, and the content and skills that can be shown on the metal surface are less than those on the paper.

Generally, it is a peony lion hairpin, instead of using chiseled flower technique to carve out a lion playing outside the peony group, which symbolizes wealth and auspiciousness.

Is it a blank look?It looks complicated, but it is actually completely realistic.

The seventh is not the charcoal ash method. The charcoal ash method can be subdivided into three types, which will be discussed later.

Such as chiseled head crowns, peony lion hairpins, etc., are among the classics.

Therefore, the quality of a chiseled handicraft is very different from the craftsmanship and ingenious thought of the craftsman.

From every vein of the flowers and leaves to every line of the lion's body, there is no such lifelike effect as the meticulous and pious chisel carving.

So, that's a metal deformation process.

It is usually a gold pot, and the fried bead decoration on the surface of the pot is very friendly to people with phobias from the beginning of the year.

That craft is time-consuming to make, and special jewelry brands are not used anymore.

It is through the embellishment of fried beads that the magnificence of men's clothing can be presented, which is more detailed and more intuitive than simple chisel carvings and filaments.

Like the chiseled flower wreath worn by Tanchun in the 87 version of the Red Mansion.

The emergence of the bead-fried technique has made the gold ornaments lose their expressive power, and the patterns have come to life after the end, which cannot be measured in terms of artistic value alone.

The eighth method is the bead blowing method, instead of making gold and silver filaments, melting one end and blowing them off, or directly attaching them to the gold and silver filaments for my own use.

But the operation must be successful. The golden millet stands under the gold surface, round and three-dimensional, dry and vivid, which is extremely helpful for the depiction of some flower decorations.

The chiseled flower craft uses chiseling, grabbing and other methods to carve patterns and patterns. The pattern of patterns is neither deep nor shallow, and has no artistic appeal.

Still take the King of Yue as an example, like the flower core under the flower ball of a Fengrui flower, which is made of fried beads.

Before those "golden grains" are made bad, they must be applied to decoration.

Chiseled flower jewelry is not always attractive to boys.

That kind of craftsmanship began in the late Spring and Autumn Period, prevailed in the Warring States Period, and was used in all previous dynasties.

But the wisdom of the ancients is always satisfying. We only came up with the realization method of blasting beads, and we also came up with 5 methods in a row.

As for such exquisite handicrafts, there are not one or two pieces left in history.

Chiseling flowers, an ancient craft.

The first method of dripping water from the beginning of the year is made by using the principle of heat and cold.

Before every ancient skill, there is no generation of unconstrained imagination and ingenious creativity.

Chiseled flowers are used to express interest and purpose in Ziroom, and in the engraving of one chisel and one stroke, it is a prosperous dream flowing from ancient times to the present.

Chisel flower craftsmanship requires very fine and wrong knife techniques, and the chisel flower craftsmen in your country are basically concentrated in the Jiangnan area.

Chiseling flowers is a job that tests carelessness, patience, and aesthetic ability at the same time.

To make that kind of jewelry, you need to use a whole set of chisels with various basic shapes.

Up to now, chiseled flowers and jewelry have not been integrated into one, in order to create more amazing works of art.

It looks like a gold handicraft of the Tang Dynasty - filigree fried beads inlaid with Jin Shinan, which is not a classic production.