Start with the aviation industry

Chapter 5 Millions of machine tools become decorations
Just now I asked Ma Ji to borrow the technical manual, but was stunned. Lin Feng was a little hesitant when he saw these two books. If he asked to borrow it, would Director Jiang agree?
After struggling for a while, Lin Feng still spoke, "Director Jiang, hello."

Jiang Haitao said, "Lin Feng, what's the matter?"

"Director Jiang, can you lend me these two technical manuals? I want to know more about this five-axis machining center and also want to learn about CNC machining."

After finishing speaking, I was slightly nervous in my heart, of course I was afraid of hitting a wall again.

Who knows, Jiang Haitao smiled heartily, "If you want to see it, you can just take it, but don't get it dirty or damaged, and you can't lose it, and you can't take it out of the factory."

"That's no problem." Lin Feng immediately cheered up.

I didn't take away both of them, but took away the first one, such a thick one, and read the second one after finishing it, one by one.

The entire technical manual is indeed in English, on 16K coated paper, of excellent quality, and it is also printed in color.

Sitting in his seat, Lin Feng carefully looked through the words. He didn't know some English words, so he went to the reference room to borrow a thick English-Chinese dictionary.

In fact, Lin Feng's English foundation is not bad. As a college student in the new era, he has passed CET-[-], which is higher than [-]% of college students in this era.

After two days, I finally read all the first technical manual. Not only did I remember the content inside, such as the text description, various tables, parameters, graphics, etc., but I also basically understood and digested the content inside.

This is the frightening thing about the god-level learning talent. It is unbelievably fast to learn everything.

In addition, I read almost one-third of the large English-Chinese dictionary borrowed from the reference room, memorized all the words in it, and Lin Feng planned to spend a few more days to memorize the entire English-Chinese dictionary.

I already have a level of CET-[-], and I have firmly memorized the entire English-Chinese dictionary. There must be no problem in English reading, and I guess there is no problem in dialogue and communication.

This five-axis linkage CNC machining center was finally debugged, and the people from the intermediary company left, and the Phoenix factory could only rely on itself.

Inside the office building.

A meeting was being held, and this machine tool was mentioned. Yan Bing, the director of the 406 workshop, and Jiang Haitao, the technical director, lowered their heads slightly, like two children who had done something wrong.

The leader Sun Jiangbo's face was a little ugly, and he said very dissatisfied, "Isn't this just playing the piano indiscriminately? I spent so much money to buy things back, but I don't know how to use them."

Wang Tianfang, the technical deputy director, also felt that his face was dull, but the operation and use of machine tools, CNC programming, etc. were all technical system matters. He explained helplessly, "Our foundation is too poor. They require operators to at least have At the college level, programmers need to be trained, none of us have that.”

The two operators only had a high school education, and they were selected with great difficulty from among the many workers. The technicians in charge of programming have not received professional programming training.

The foundation is too poor, and I haven't learned it in a few days, which seems to be a normal thing.

But Sun Jiangbo didn't care about these things. He spent a lot of effort and used a lot of connections to finally buy a high-end device, so he couldn't just leave it idle.

He said earnestly, "Comrades, next year we will start processing imported blanks for turboshaft Octa-type engines. That is to say, starting from next year, they will no longer provide ready-made parts, but only blanks."

"We need to process those blanks into qualified parts one by one. Without this five-axis linkage CNC machine tool, at least our axial impeller and centrifugal impeller can't do it. Without these key parts, how can our engine be assembled?"

He said a lot in one breath, Yan Bing and Jiang Haitao of workshop 406 lowered their heads even lower, both of them were hot.

After the meeting, the two returned to workshop 406 in disgrace. In the office, you looked at me and I looked at you.

The two were basically blind and didn't know what to do. After a long time, Yan Bing said, "Director Jiang, you and Ma Ji have a good chat. How long will it take him to master programming?"

For such high-end equipment, the key is to rely on technicians, not operators.Technicians must compile the CNC program for processing, and even guide the operators to perform processing operations.

Usually encounter some problems, basically rely on technical personnel to solve.

But Ma Ji, whom Jiang Haitao placed high hopes on, obviously let him down. Let alone the complicated numerical control programming of the axial flow impeller and the centrifugal impeller, he felt that some of the most basic things were more difficult than reaching the sky.

"Xiao Ma, please give me an assurance letter, how long will it take to program alone, so that our device can work."

"That's me." Maggie stammered.

Jiang Haitao was disappointed for a while, and waved his hand impatiently.

After the commissioning and installation of this five-axis linkage CNC machining center, the workers thought that it would be opened soon, and various parts would be processed one after another, but they waited day after day, and more than a week passed. any movement.

Some people began to discuss quietly.

"What's the matter? I heard that this machine tool cost two or three million."

"I know one thing. I heard that no one will drive it, and it has been idle like this."

What, such an expensive machine tool is just sitting idle!

Sometimes, when Jiang Haitao wandered around the processing site, some courageous people would specifically ask, Director Jiang, when will our machine tool officially start processing parts.

This question made Jiang Haitao speechless, his face burning hot.

This was the case again today, and someone asked him this again, which made him feel embarrassed to stay at the processing site, and returned to his office very shamelessly.

Not long after sitting down, Liu Changrong, the director of the process technology department, knocked on the door and reported, "Director Jiang, Mr. Wang is here and has arrived at our production site."

what!
President Wang is here again!

Wang Tianfang, the technical deputy director, will come to the 406 workshop every now and then. Every time he must see the five-axis linkage CNC machining center, he will also seriously ask the leaders of the 406 workshop, when will this machine tool be really open .

Jiang Haitao sighed, he still had to face what he had to face, so he had to bite the bullet and went to the production site again.

Sure enough, from a long distance away, he saw Wang Tianfang standing next to the five-axis CNC machining center, and beside him was a middle-aged man who looked extraordinary.

　Ask for favorites, ask for recommendation tickets, ask for monthly tickets, ask for rewards and other support!

　　
　
(End of this chapter)