Start with the aviation industry

Chapter 6 Wang Tianfang boasting about Haikou

The middle-aged man knew at a glance that he was not an ordinary person. The aura of a superior person was invisible, and he might be a big leader.

He wears a pair of black-rimmed glasses and has a bookish air. If he is a leader, he is probably a knowledgeable and educated leader.

He is the chief craftsman and chief machining expert Deng Shaoyuan of Huaxia Aviation Industry Corporation.

The Phoenix Factory belongs to Huaxia Aviation Industry Corporation and is one of several aero-engine factories under the Corporation.

Two or three million high-end imported equipment took so much effort to get back from abroad, and the entire domestic aviation industry only has two sets. As an authority in the field of mechanical processing, Deng Shaoyuan of course wanted to come and see for himself.

One of the reasons why he came here so quickly was that he had heard some gossip that the two- to three-million-dollar equipment in the Phoenix Factory was actually idle and hadn't been put into use.

Hearing such gossip, Deng Shaoyuan still had a little disbelief in his heart. It is impossible for such expensive equipment to be left unused.

After arriving at the Phoenix Factory, he went to the production site of Workshop 406 accompanied by Wang Tianfang without saying a word. As soon as he saw this equipment, he walked over directly.

"Mr. Wang, this equipment has cost us nearly 300 million yuan!"

Wang Tianfang hurriedly said, "Thank you to the leaders of the head office for spending a lot of human and financial resources to buy this equipment for us."

Deng Shaoyuan nodded slightly, and indeed spent a lot of manpower and material resources. He asked with concern, "The equipment has been installed and debugged."

"The installation and commissioning have been successfully completed."

"Okay." Deng Shaoyuan said, "Now that the installation and commissioning have been completed, I want to take a look at its processing in person, even if I process a few test pieces."

Well this.
Wang Tianfang seemed hesitant. It is true that this equipment has been installed and debugged, but no one knows how to use it. The two operators have only trained for a few days and only know a little bit about it. Everyone was disappointed.

"Why, it's difficult." Deng Shaoyuan asked.

His heart skipped a beat, and he thought to himself, could it be that the gossip is true, that this device has really been left unused all the time because no one will use it.

If this is the case, wouldn't it be playing the piano indiscriminately!
Being questioned like this, Wang Tianfang definitely couldn't tell the real situation, but bit the bullet and said, "No problem, it's just that our test piece is still under preparation and it will take a little time."

For the time being, I can only find such an excuse, saying that the test pieces for processing are still under preparation.

He can't tell the truth!
If the truth is told, this multimillion-dollar piece of equipment is idle, and it will soon reach the ears of the leaders of the head office, and the leadership of the entire Phoenix Factory will be held accountable, and they will have to bear serious responsibilities and consequences.

Deng Shaoyuan smiled meaningfully, and continued to ask, "How long will it take to prepare the test pieces? Since I have come to Phoenix Factory, I must take a look at the processing status of this machine tool."

Under such circumstances, Wang Tianfang could only bite the bullet and boast, "There is no problem with the processing of the test piece. Give us three days of preparation time, and we will definitely be able to process the test piece."

After thinking for a while, Deng Shaoyuan said, "I'm afraid it won't work in three days. My plane the day after tomorrow must go back to the capital, and I need to attend an important meeting. Tomorrow, tomorrow afternoon at the latest, I must see the processing of the test piece."

Wang Tianfang definitely couldn't say no, so he had no choice but to continue to bite the bullet and said, "Then arrange it tomorrow afternoon, and we will process the test pieces."

Just as he finished speaking, he saw Jiang Haitao, the technical director of workshop 406, approaching, and Wang Tianfang said, "Director Jiang, you came just in time. Chief Technician Deng wants to see the processing of the test pieces of this machine tool, and arrange for the test pieces to be processed tomorrow afternoon. "

what!
Test piece processing tomorrow afternoon!

Jiang Haitao was stunned and froze on the spot. Fortunately, Deng Shaoyuan didn't notice his expression, otherwise, he might have doubts again.

Jiang Haitao was stunned for a long time before he came to his senses. At this time, Wang Tianfang had already left with Deng Shaoyuan.

What to do!

He felt Alexander, and wanted to run after him and tell Deputy Factory Manager Wang, this is not possible, it is absolutely impossible to process the test piece tomorrow.

But he also knew that Deputy Factory Manager Wang patted his chest in front of chief craftsman Deng and promised to process the test pieces tomorrow afternoon. He said that, wouldn't he slap Deputy Factory Manager Wang in the face.

I don't know how long it took before Jiang Haitao returned to his office with a heavy heart, and called Ma Ji over again.

"Little Ma, the test piece will be processed tomorrow afternoon, are you sure?"

Ma Ji still hesitated, "Director Jiang, maybe it won't work, me."

Jiang Haitao waved his hand impatiently, and said with a somber face, "I don't want to hear you say no, the test piece must be processed tomorrow afternoon, so that's it, let's go get ready."

Seeing Ma Ji leave with his head down, Jiang Haitao felt very regretful in his heart. He shouldn't have pinned his hopes on Ma Ji in the first place.

At the beginning, Jiang Haitao entrusted Ma Ji with a heavy responsibility because he had a good command of English and had some experience with CNC programming.
I hope there will be no problems tomorrow, and the test piece must be successfully processed no matter what.

the next day.

Many people found that Maggie looked tired and didn't wake up, and some people found that Director Jiang's situation was similar.

The two of them didn't sleep last night. Maggie spent the whole night reading the technical manual, but his mind was still a mess.Jiang Haitao couldn't sleep because he was worried about the processing of the test piece this afternoon.

Lin Feng didn't gossip like that, and he didn't pay attention to the abnormal situation of Ma Ji and Director Jiang. He spent almost half of the morning reading.

He has already read all the three thick technical manuals of the five-axis linkage CNC machining center. The contents of the technical manuals are not only memorized in his mind, but also basically understood and digested. This machine is mysterious in the eyes of others. CNC machine tools basically have no secrets in front of Lin Feng.

Lin Feng is very clear about its structure, structure, principle, operation, etc. The only thing he lacks is actual operation, but he is confident that if he allows himself to operate this machine tool, there should be no problem.

On the big table, there was a thick stack of books, all of which were borrowed by Lin Feng from the company's archives, and all of them were professional books in the field of aviation industry.

There is even a book on the introduction and improvement of CNC programming, which was found out in the archives with great difficulty. In 1990, even a large factory like Phoenix Factory with thousands of employees had very few such professional books.

In about one or two hours, Lin Feng finished reading the introduction and improvement of NC programming, and felt that he had gained something.

I raised my hand and looked at the Shanghai watch on my wrist. It was only a little past ten o'clock in the morning, and my heart moved slightly. Are you trying CNC programming?
Lin Feng definitely didn't like simple programming, and it would be difficult to do it. He quickly thought of several parts, that is, the axial flow impeller of the turboshaft Bajia engine, or the overall CNC milling of the blades of the centrifugal impeller.

(End of this chapter)