The Technology Tree of Xueba

On October 15th, Zhou Yu stood in front of a row of bionic robotic arms, which are newly assembled industrial robots.

The largest of these robotic arms is more than three meters high, and the fingers are 20 centimeters long. The smallest robotic arm is only one millimeter in size. It is the smallest industrial robot in the world. Most of the robotic arms are about the size of human arms.

With detailed technical information and powerful 3D printers, Xinghuo Science and Technology Research Center quickly produced industrial robots.

Zhou Yu stared at these industrial robots and said: Zhang Yunqiang, install the software for the industrial robots, and we will formally test whether the industrial robots have achieved the intended goals.

Zhang Yunqiang asked employees to install software for industrial robots, and he showed a simple software with the Protoss bracelet.

Mr. Zhou, this is our Xinghuo industrial software. We have specially created supporting software for industrial robots based on their characteristics.

It is a multifunctional industrial software integrating industrial management and industrial design.

The industrial management function is very advanced, as long as the information of the industrial robot production line is imported.

The software has a one-click manufacturing function. As long as this function lights up, it means that industrial robots can directly produce this product without the need for engineers to design the production process.

It is also a very advanced industrial design software, and the industrial design of any product of our company can be completed through it in the future.

When designing graphene chips, we can only use American software to design products, and now Spark Industrial software can completely replace them.

Ma Shangshu, standing aside, also said with emotion: Yes! Industrial design software is very important. We study high-sensitivity magnetic field antennas. Without special industrial design software, we can only pick up a pencil and start drawing design drawings.

Yuan Keqing also said with empathy: I have been managing the factory and know a lot about the inside story of the machinery industry.

Our country's entertainment news Internet technology is very strong, but the industry is not good at all. They are capital-intensive industries, and the most important thing is that the fault tolerance rate is very low.

The state has also stepped up its efforts to support software in this area. A state-owned software company has invested billions of yuan, but it can only achieve the functions of similar software in the United States 10 years ago, and almost no factories use it.

Industrial software is slightly flawed, which directly affects the quality of the product and is likely to bring down an enterprise.

Therefore, when business owners choose industrial software, they all choose world-renowned brands that have passed the test of time, and our Xinghuo Precision Manufacturing is no exception.

I hope our company's software can be better. Some confidential industrial designs can only be used through LAN, and many functions of the software cannot be used.

Zhang Yunqiang said proudly: Xinghuo industrial software has a strong artificial intelligence algorithm built in it. I can't guarantee whether the industrial software is the best in the world, but its fault tolerance rate is definitely the strongest.

After the industrial robot software is installed, the test can be officially started.

Zhou Yu nodded after hearing this and said: Then start testing! See if he can achieve the expected effect.

The industrial robot is sent to the decontamination room to start cleaning it thoroughly, after which it is sent to a vacuum chamber.

Seeing the industrial robots being sent to the vacuum chamber, Yuan Keqing asked in surprise: Do industrial robots still need a vacuum environment? Then our dust-free workshop is not going to be changed into a vacuum workshop.

As a result, the factory's production costs and staff quality requirements are extremely high.

Xiang Xiang explained to him: The dust-free workshop can also be used. It mainly depends on the processing accuracy of the accessories. The allowable error of the accessories is more than ±1 micron, and the dust-free workshop can be used. If the precision is high, the vacuum workshop must be used to prevent the air from affecting the processing. impact on precision.

We are testing the limits of industrial robots and must use a vacuum chamber for processing.

Yuan Keqing was relieved to hear this. Fortunately, the machining precision they need is not so fine, but a vacuum workshop must also be established, and high-precision products will definitely be processed in the future.

The experts began to input the corresponding data to the industrial robot with the assistance of the programmer.

The industrial robot is fixed, the vacuum environment, the temperature is constant at 23 degrees Celsius, and the processing starts.

Xiang Xiang explained on the side: Process 3D printer high-energy electromagnetic field device, high-sensitivity magnetic field antenna, ultra-sensitive light pressure sensor, microwave transceiver, graphene chip, process 100 parts each, and calculate its processing error and processing speed.

Zhou Yu watched the processing of industrial robots through the holographic display.

According to different processing accessories, industrial robots are divided into single-arm processing, double-arm cooperation, and multi-arm collaborative processing.

The high-energy electromagnetic field required by 3D printers must be stable and have a long life. They chose ferric oxide crystal material and processed it to form a stable high-energy electromagnetic field.

The three-meter bionic robotic arm began to cut the basketball-sized ferric oxide crystal.

The one-millimeter-sized mechanical arm directly drills into the ferric oxide crystal to process its internal structure.

The main model of bionic robotic arms is the size of a human arm, and they process different accessories with different tools.

The smallest robotic arm with a size of one millimeter is also processed into a one-nanometer graphene chip through micro-laser processing.

Xiang Xiang introduced: Our industrial robot is very flexible, its movable joints adopt magnetic levitation technology, and the force is also magnetic field traction technology.

They do not generate internal friction during movement, and are more flexible than human arms.

Only 20 minutes passed, and all industrial robots stopped moving.

Yuan Keqing was stunned for a moment and asked, Are they broken? Why are they not moving?

Xiang Xiang replied with a smile: All parts have been successfully processed, the pass rate is 100%, the processing error of micro industrial robots is 0, and the processing error of other types of industrial robots is within 1 micron.

If the dust-free workshop is used for large-scale processing, the pass rate is expected to be above 98%.

Yuan Keqing looked at these industrial robots and said with emotion: 100 parts are processed so quickly, and some robots stop working in 10 minutes, and the success rate is still so high.

With 3D printers and industrial robots, our Xinghuo Precision Manufacturing is worthy of the name. What are the costs of different types of industrial robots?

Xiang Xiang replied: After our cost calculation, we don't consider the cost of R\u0026D and labor, but only the cost of materials, electricity and so on.

Three-meter industrial robots are 3 million, normal-arm industrial robots are 700,000, and millimeter industrial robots are 50 million.

The main cost is limited by the high price of materials, and the materials of different types of industrial robots are different. For example, the raw material lithium manganate crystal of millimeter industrial grade is extremely difficult to manufacture, and the success rate is very low.

I announce the official success of the industrial robot project, and I will announce the rewards of this project. Zhou Yu said happily.

When everyone heard Zhou Yu's words, they immediately burst into warm applause, and some continued to cheer.

The industrial robot project team enjoys 10% profit distribution of industrial robots, and the distribution amount is determined by Mozi according to the contribution.

Xiang Xiang, the employee level was promoted to level 11, and the bonus was 5 million.

Feng Yunde, the employee level is promoted to 12th level, the bonus is 15 million, a 100-square-meter commercial house in Yanjing Jinhua Community, a 100-square-meter commercial house in Jinhe Community, Xiong’an New District, and a BYD electric car.

Li Fang, the employee level is promoted to level 9, and the bonus is 3 million.

Qiu Mingming, the employee level is promoted to level 9, and the bonus is 3 million.

...

Everyone whose name was read, they were extremely happy, but the others were not jealous, this was what they deserved according to their strength.

Thanks to Fantasy Doraemon, Little Brother is Hua Tsai and Chuzhou for their rewards.