The Technology Tree of Xueba

On the afternoon of August 25th, the industrial robot project was officially launched. Xiang Xiang was responsible for coordinating the entire project, and Zhou Yu was responsible for reviewing the results of each project.

The 85 project teams in the research center took action immediately. The non-core technology is not difficult. Each technology is at most a variant of the existing technology, and one project team is responsible for one technology.

For the three most difficult technologies, each technology has five project teams to start experiments according to different scientific research directions.

The project teams are also constantly exchanging results, and Mozi changes the research direction at any time according to the progress of the experiment.

On September 3, the 28 project teams with the easiest difficulty received good news one after another. With the cooperation of Mozi, they constantly corrected the direction of scientific research, and finally succeeded in researching results. The technology is basically the same as that of Mozi's decomposition.

On September 12, all the remaining 42 project teams were successfully researched.

However, metal alloy 3D printing technology, magnetic field traction technology, and vibration sensing sensor technology, these three technologies still have no clue.

Zhou Yu recruited elite talents from idle project teams and asked them to join these 15 project teams to jointly research the three most important technologies.

At the same time, he ordered Zhang Yunqiang, the general manager of Xinghuo Intelligent, to study the operating software and industrial software of industrial robots in advance according to the performance of industrial robots.

Panting, Feng Yunde pushed the door open and came in, shouting loudly: It's a success, the research was successful today.

Zhou Yu asked in surprise: What kind of technology have you successfully researched? I'm so happy.

Metal 3D printing technology has been solved by me, and it can directly print nano-metal materials, but it cannot print metal alloys, it must be metal single substance or metal compound, but the material properties are better than expected metal alloys. Feng Yunde looked proud Said.

You successfully researched the technology of 3D printing. I remember that the project team specializing in 3D printing technology does not have you. Zhou Yu asked in surprise.

Feng Yunde is not in the project team at all, and he has no funds for research. Besides, how can he develop this technology by himself, Zhou Yu is very confused.

Mr. Zhou, scientific research can only be successful if it finds the right direction. Once the direction is wrong, no matter how hard you try, it will be the opposite.

I am a level 2 expert and have an unconditional research fund of 1.5 million yuan. I use this fund to develop 3D printing technology.

You remember the ion growth method you proposed, and we have developed graphene wafers through the ion growth method.

At that time, I thought that this method should have a wide range of applications, not only for graphite, but also for ionizing other materials without success.

Not far from Xinghuo Technology is the Institute of Ultra-Strong Magnetic Fields. I bought a strong electromagnetic field equipment from them that was on the verge of becoming obsolete, and tried to ionize metals and metal compound materials.

Metal crystals and metal compound crystals were successfully obtained by ion growth method.

Such metal crystals or metal compound crystals are melted by lasers of corresponding frequencies to obtain nano-metal crystal material products, nano-materials produced by certain metal crystals, and some special effects.

Feng Yunde talked about his scientific research process.

Listening to Feng Yunde's narration, Zhou Yu's eyes kept growing. His scientific research process is incredible.

Is the 3D printer finished? I want to see it. Zhou Yu took a few deep breaths and said calmly.

I have been prepared for a long time, but I am not ready to report to you. They are all weak chickens, and they are not at the same level as today.

Mr. Zhou, they are too dogmatic and rigid. There is no problem with following the steps, but innovation is not enough. I will obey you in the whole company.

Feng Yunde is very inflated, he feels that he is the top leader in the field of materials in the Spark Science and Technology Research Center.

Zhou Yu saw the silly big black thick 3D printer made by Feng Yunde.

One cubic meter in size, the white iron cabinet has four simple mechanical arms on it, and a laser is installed in the center of them.

Next to the tin cabinet, there are three grooves, which contain brown powder, silver white powder, and green powder.

Feng Yunde pointed to the materials in the cabinet and said: The brown ones are iron hydroxide crystals, the silvery white ones are iron crystals, and the green ones are ferrous oxide crystals, all of them are nanoscale powders.

These crystals grow into a big lump. As long as they apply a huge external force to it in a liquid nitrogen environment, they will be broken into nano-scale crystal powder. Only today can they think of freezing with liquid nitrogen.

Mozi suddenly jumped out and said, Is this what you thought? This is one of the nine methods I calculated.

Feng Yunde walked over and made a gesture to slap Mozi on the head, but when he saw him dodging, he said with a smile: Whoever we brothers are with, what's yours is mine.

Zhou Yu laughed off Feng Yunde's trickery, and asked, You start the 3D printer, and I'll take a look at the printed product.

Feng Yunde poured the silver-white iron crystal into the material inlet of the equipment. He set a few values ​​in a certain software on the Protoss bracelet, and the equipment started to start.

The 3D printer evenly sprinkles a thin layer of silver-white powder, and the laser above the device emits hot laser light and starts to move at the same time.

This process was repeated, and the 3D printing equipment stopped working soon. Feng Yunde turned off the power, poured out the excess powder in the equipment, and took out three silver-white drill bits from it.

Feng Yunde introduced: This iron crystal nanomaterial is very hard, and the drill bit made of it can easily process all the high-hardness materials today.

Zhou Yu praised: You have made great contributions to the company, and you have done a very good job. This time, your employee level is at least level 12. After the corresponding reward projects are completed, you will be assigned, at least one house in Yanjing.

So I can allocate shares, I still have my own house in Yanjing, and I am also a senior executive of the company. Let's see if Jiang Weiwei has any reason to refuse me.

Feng Yunde grinned widely, happy like a child.

Zhou Yu summoned experts to start redesigning and manufacturing a new 3D printer based on Feng Yunde's research results.

He has been studying the properties of different metal crystals or metal compound materials.

When the acquisition of knowledge reached a critical point, the technology tree in Zhou Yu's mind seemed to be fertilized, and one of the small branches on the science side grew rapidly in his mind, and soon the branch of materials science grew out.

On September 15, the research center produced a relatively perfect 3D printer, and also preliminarily studied the characteristics of hundreds of metal crystals or metal compound crystals.

Zhou Yu felt the technology tree fluctuate in his mind, the ferric oxide crystal resonated with the magnetic field traction technology spores, and the copper sulfate crystal resonated with the vibration sensing sensor technology spores.

Material technology is the cornerstone of scientific research. All advanced achievements must be supported by materials with corresponding functions. After breakthroughs in material technology, these projects will be driven forward at a high speed. Zhou Yu said with emotion in his heart.

He immediately told the experts to start developing these two technologies based on these two materials.

On September 23, magnetic field traction technology and vibration perception sensor technology bloomed on the technology tree one after another, and all the technologies needed for industrial robots have been developed.

Zhou Yu came to the space of the technology tree in his mind, trying to guide the technology of industrial robots decomposed by Mozi to continuously vibrate.

He soon felt that the part of the technology tree in his mind that represented technology began to vibrate. The technology that Zhou Yu actively vibrated in the technology tree released green brilliance, which soon led to a new branch called robots appearing on the technology side of the technology tree.

Exactly as I thought, the method of decomposing scientific research is really useful, and I discovered the important application of the technology tree. The life of cheating is really wonderful. It only took one month to research the difficulties that others could not overcome for several years. Zhou Seeing this situation, Yu roared happily in his heart.

Thanks to Book Friends 20171114202653919 for the reward.