Siheyuan: Happy He Yuzhu

He Yuzhu initially responded by comparing the wear and tear and maintenance costs of the rolling mill's cars with those of other cars and then reported them.

But it didn't pass and they were called back inside the steel rolling mill.

The reason is very simple. What Director Yang requires is how much you use now and how much you can save.

It’s not how much others use, but how much you save compared to others.

This statement is a bit convoluted, but in short it is what we often teach our children, you have to compare yourself with yourself and get better day by day.

that is it.

Of course, Director Yang’s eyelids are a bit light. The boss asked him to pay attention to the factory, but he just stared at the factory.

This is why position determines the head. Factory Director Yang has never thought that with so many cars in the country, if each car could save a little bit, how big a sum it would be.

It can also be seen from the original drama that Director Yang is not lively, otherwise he would not take the projectionist and the cook to the big boss's house to build relationships.

But when it comes to work, the rigidity of thinking is certain.

.........

Once an atmosphere is formed, the people in it will respect the atmosphere more and more and make achievements in it.

For example, eating and drinking, a group of people are used to eating and drinking together, and there are always people who want to come up with new tricks.

The same is true for the car class. They are all used to the set of rules set by He Yuzhu, and have found practical benefits from this set of rules.

Then it is inevitable that all drivers will spontaneously abide by and improve this set of rules.

Refinement all appears slowly from small to large, and then is summarized in words by a visionary leader.

He Yuzhu didn't know anything else, but he would always compare what the driver masters had detailed with what he remembered.

If it feels more convenient than before, then implement it.

Of course, many problems will arise during the process.

During disassembly and assembly, the most common problem is the sliding thread of screws and nuts.

There are many reasons for this, such as the nut material and heat treatment are not up to standard, and there are also problems that are not paid attention to during daily operation.

For example, several young drivers now have a headache over a sliding screw.

This kind of thing is very common and causes trouble, but if it is too common, it will be a big trouble.

If production technology cannot keep up, there must be small gaps of one kind or another. When small gaps accumulate, they become big gaps.

Like the nuts and screws on a car, they are inevitably damaged. Usually if there is a problem, just replace a screw.

But at that time, there was really no standardization in the implementation of standards in this area, so whether the quality was good or bad depended on personal luck.

At this time, maintenance and so on, no matter how detailed He Yuzhu is, it will inevitably involve violent knocking.

After three knocks and two knocks, coupled with the original quality problems of the product, it is normal for these things to have a short lifespan.

Masters like Master Chang have dealt with this kind of thing through experience.

I put a small paper pad on it, unscrewed the screw, threw it into the scrap box, and then replaced it with a new screw.

The wrenches at that time were still mainly ordinary wrenches, the type of adjustable wrench, which was U-shaped. When inserted inward, it could cover all four sides.

It is very common for thread slipping problems to occur after a few twists, improper force, or incorrect locking.

Therefore, there are many nuts and screws of this kind of sliding thread in the scrap bin of a large truck.

Nothing is unachievable.

There were one or two concerned people who noticed this and reported it.

The matter has come to He Yuzhu. For this kind of thing, if you expect the manufacturer to produce nuts and screws with a 100% pass rate, don't expect it.

Naturally, He Yuzhu and the others could only think of ways to repair the tools.

A young apprentice laughed and said: "It would be great if the entire nut could be jammed during the disassembly process."

Master Chang also smiled and said: "Isn't it just a plum blossom wrench?"

The young apprentice waved his hand to indicate that this was not what he meant. After thinking for a long time, he said: "What I said is that it can be aligned. When you put a pair on it, it can be firmly stuck. It is not like ordinary wrenches or torx wrenches, which can get stuck a little. You can also use force on the sides, that way there will be less damage.”

This is a problem of using force. He Yuzhu doesn't understand this, but he knows the solution.

In later generations of socket wrenches, there is basically no chance of the thread slipping if the wrench is properly aligned.

Moreover, they are in a steel rolling mill and cannot produce airplanes and rockets. They can only produce the simplest socket wrench by hand.

And to put it bluntly, except for the hardening of the internal water chestnuts, the socket wrench really has no technical content. As for the ones with torque in the future, that is a question at another technical level.

Just do it as soon as you think of it. There is no need to ask Section Chief Lu for instructions on this kind of thing. Just find a few master craftsmen, smoke a cigarette, and then quench and anneal it.

But that’s not possible now, we have to save money.

Now Director Yang's eyes are fixed on the workshop. Not to mention private work, even if there are a little more waste products, the workshop director and workshop team leader will criticize one by one.

So He Yuzhu could only draw the things and let Section Chief Lu hand them over to the Technology Section.

Logically speaking, this kind of thing is just a matter of a small clerk redrawing a set of drawings for the workshop to produce.

But at this time, another problem that happened to be bothering Director Yang and Deputy Director Duan was handed over to the technical department.

The technical section chief, Section Chief Fu, is also the first and second in rank.

The Canton Fair will be held this year.

Documents are issued from above, asking each manufacturer to report all the things they can present to the meeting, "select the best from the best", and select a batch of suitable products to show our construction results to the world.

Of course, the more important thing is to exchange some foreign exchange.

We really lack everything and need to buy everything from outside.

These days, there is a lot of waste waiting to be done, and we want to resume production and take it to the next level. What stands in front of us is lack of money to buy things. How much can you buy with just gold reserves?

After all, you have to sell what you produce at home and make money before you can buy good things from other people.

But what can we sell?

In addition to raw materials, grain, and some folk products.

We have most of the primary industrialized products, and others also have them.

And because their industrialization was relatively early and their supporting production facilities were relatively complete, their production costs were cheaper than ours.

During that time, our upper management really tightened their belts and did business at a loss with tears in their eyes.

There is no way, the technology cannot keep up with others, and if you want to upgrade the machine, it must be like this.

That’s why the higher authorities organized this Canton Fair to test the waters. This is also our window to the world.

And to put it more bluntly, this is the spoils of war we won on the peninsula.

If the peninsula does not win, no matter how cheap our products are, those neighbors who are used to looking at us will not buy our products.