When I traveled through time and became a chief, I ruined the system.

"System system, Daimao system, please briefly describe the steps to turn on your debugging mode?" Luo Xiaofei called frantically in his mind.

"Ding! As a super demo model of the universe, the steps to open my debug mode are very simple.

I'll give you a few of the most common ways to turn on debug mode.

Method 1: Turn on debugging mode through the settings menu

1. Open the settings menu of the Daimao system. Normally, you can find this option in the application list.

2. Look for "About Daimao System" (or similar option) in the settings menu and click to enter.

3. In the "About Daimao System" interface, find the "Version Number" or "Software Information" option, and click it 7 times in a row until the "Developer Options Enabled" prompt appears.

4. Return to the settings menu and you will find a new option, "Developer Options".

5. Enter the "Developer Options" interface, find the "System Debugging" option and turn it on.

6. If your Daimao system is not connected to the computer yet, please plug in the system cable and connect it to the computer. At this time, your Daimao system will receive a confirmation dialog box for system debugging. Please click "OK" to complete the settings.

Method 2: Turn on system debugging mode through quick settings

1. Slide the drop-down menu to expand the quick settings panel.

2. In the quick settings panel, find the "Settings" icon and long press (or click) it to enter the settings menu of the Daimao system.

3. Next, follow steps 3 to 6 in method to turn on the system debugging mode.

Method 3: Turn on the system debugging mode through the command line or terminal

1. First, make sure that the DEMO tool has been installed on your computer. You can search and download the DEMO tool on Sanyang.com and install it according to the official guidelines.

2. Connect your Daimao system to the computer and start the command prompt or terminal program.

3. Enter the following command in the command prompt or terminal and press the Enter key:

`` `

DEMO devices

`` `

This will bring up a list of connected devices, ensuring your system is properly connected and recognized.

4. Enter the following command and press the Enter key to open the system debugging mode:

`` `

DEMO shell settings put global development_settings_enabled devices

DEMO shell settings put global system_debugging_enabled devices

`` `

5. Disconnect the Daimao system from the computer and reconnect them. At this time, your Daimao system will receive a confirmation dialog box for system debugging. Please click "OK" to complete the settings.

Method 10: The following are the steps to turn on debugging mode in the DEMO operating system:

1. Open the Settings app.

2. Applications--Select "Update & Security".

3. Select the "Recovery" tab in the menu on the left.

4. Select "Restart now" under "Advanced startup".

5. The computer will restart and the "Choose an option" screen will appear.

6. Select Troubleshooting.

7. Select "Advanced Options".

8. Select "Advanced Options-Startup Settings".

9. Select Restart.

10. The computer will restart and display the Startup Settings screen.

11. Press F7 or select "7" to enable the "Disable driver signature enforcement" option.

12. The Daimao system will restart and turn on the debugging mode.

Once debug mode is enabled, you have access to a variety of useful tools and options to solve your problems. For example, you can use Task Manager to find which application or process is affecting system performance, Performance Monitor to find processes and services that are causing performance problems, or Event Viewer to find details of installation problems.

Final Thoughts

No matter which method you choose, turning on system debugging mode is very simple. It can facilitate data transmission and development testing between you and the Daimao system. Please note that after use, for security reasons, be sure to turn off the system debugging mode to prevent unauthorized access. "Damao System answered mechanically, emotionlessly, and unhurriedly.

After hearing these "simple" steps, Luo Xiaofei suddenly felt his head getting bigger. It is indeed a super demo model of the universe, but it is so difficult to turn on the debugging mode. And there is a code ahead that needs to be deciphered!

These steps are obviously not simple, they involve complex debugging mode turning on, as well as advanced techniques such as password deciphering. Luo Xiaofei understood that this required him to use all his knowledge and skills, and even required him to study some areas that he was not familiar with before.

His mind began to race, thinking about how to solve these problems. He knew that this was a huge challenge, but also a great opportunity. If he can successfully complete this task, he will be able to open up a whole new world and enter a higher level of programming.

Luo Xiaofei started to solve these problems. He started from the most basic steps and gradually deepened. He consulted a large amount of information, conducted countless experiments, and constantly adjusted and optimized his solutions.

In this process, he encountered many difficulties and setbacks. Sometimes, he even felt that he could not solve these problems. However, he did not give up. He firmly believed that as long as he persisted, he would be able to find a solution.

After a period of hard work, Luo Xiaofei finally successfully cracked the password and turned on the debugging mode. He felt extremely excited and accomplished. He knew that he had taken an important step towards success.

Below is an attempt to enter debug mode.

Different versions of Daimao System have different ways to enable debugging mode, as follows:

1. Daimao System 1.0.X: Click "Settings" -> "Developer Options" -> "USB Debugging" to check.

2. Daimao System 1.1.X: Click "Settings" -> "Developer Options" -> "Turn on development mode in the upper right corner" -> "USB debugging mode" to check.

The steps are as follows:

1. Click "My Device" to enter the main setting page, and click "All Parameters".

2. Click "Version" continuously until a prompt appears, indicating that developer permissions have been enabled.

3. Return to settings and click "More Settings".

4. You can see "Developer Options" in more settings.

5. Scroll down to find "USB Debugging" in the settings, turn it on, and also turn on "USB Debugging (Security Settings)". If a wireless connection is required, please turn on wireless debugging, check the pop-up prompt and click OK.

"Ding! Ding! Ding! Please note that turning on the debugging mode may expose the Daimao system to security risks. Please operate with caution!" It seems that it feels the danger. The Daimao system is mechanical, emotionless, and unhurried. The answer was a bit serious.