Rule department scholar

Hearing Fan Lei's shout, Zhao Yi suddenly came up with an inspiration about the energy absorbed by particles and the relationship between space. After returning, the more he thought about it, the more reasonable he felt.

But because it is just an idea, it cannot be directly confirmed by the "Law of Cause and Effect", and more research or experimental data are needed as conditions.

Zhao Yi recorded his thoughts, and did not have a reporter to do research. Instead, he stayed at home with Lin Xiaoqing, lived a sweet life for a few days, and looked forward to the birth of the child together.

It was not until three days later that he decided to return to the experimental group and start related research.

Returning to the experimental group this time, Zhao Yi's research was very clear. He immediately told the experimental group to prepare a new experiment, and made an experimental report to his superiors. He planned to use one month to conduct seven consecutive z-wave shock experiments.

The high-frequency experiment is related to the purpose of the research. He hopes to use continuous experiments to find out the "critical value" of particle absorption energy resistance to space absorption.

Under the compression effect of about five times, after the superconducting material enters the superconducting state, it cannot be detected to have anti-gravity characteristics, and the superconducting anti-gravity experiment has no results.

This must be directly related to the energy absorbed by the particles.

Then we can continue to think deeply. Is this characteristic of superconducting materials related to the compression ratio?

Compressed by five times, it will not be able to show the characteristics of superconducting anti-gravity.

What about three times?

What about twice?

Or will the particles with only a few tenths of times also completely resist space absorption?

Zhao Yi convened the core members of the theoretical team and talked about his own thoughts, "Now we can't be sure whether the superconducting material with five times the magnification will not have anti-gravity properties at all when it enters the superconducting state."

"Because there is still a possibility that the material has extremely small anti-gravity properties, but our experiment is not strong enough to detect it at all."

This is indeed a possibility.

Some data show a power-level reduction, which is the opposite of an exponential growth rate. The high-magnification reduction speed also causes the data to decrease to a certain extent, which cannot be detected by the experiment.

The antigravity properties of superconducting materials may also have a similar situation.

For example, if it is compressed twice, it only has [-]% anti-gravity characteristics.

With a five-fold compression, perhaps only [-]% or less of the anti-gravity property remains, and the experiment cannot detect it at all.

Then it is very necessary to conduct a series of experiments on compressing superconducting materials with different magnifications. What the experimental group needs to do is to obtain experiments with different compression magnifications to see if the superconducting materials with low magnifications can detect anti-gravity characteristics. At the same time, the relationship between the compression ratio and the anti-gravity characteristics is also studied.

Although Zhao Yi said that there is a possibility that "the anti-gravity characteristics show a power-level reduction", he is more inclined to another possibility, that is, there is a critical value for compressed particles to resist space absorption.

When the particles are compressed to a certain ratio, they will have complete resistance to space absorption.

The two are different.

If the relationship between the anti-space absorption ability presented by the particle and the compression ratio of the particle is reflected on the plane as a curve function for analysis, the former is a curve function with a power level reduction. No matter how high the compression ratio of the particle is, the function will never be consistent with the coordinates. Axis intersects; the latter also decreases rapidly, but at a certain value, it will directly intersect with the coordinate axis, and if it continues to increase, it may be parallel to the coordinate axis, or at a certain value, it will directly leave the coordinate axis and continue downward .

Zhao Yi convened the core of the theory group, and after explaining the continuous experiment, it immediately aroused heated discussions. When they understood why the experiment was carried out, everyone was looking forward to the experiment.

Where the energy absorbed by particles goes is definitely an important topic in the study of z-wave space compression.

The conclusion of this study will definitely challenge the mass-energy equation, and may also reveal some deep secrets of the rules of the universe.

Everyone is looking forward to it, everyone's work is positive.

The preparation for the experiment is relatively simple.

Because the compression is only for superconducting materials, there are very few materials in the experimental coverage area, and the z-wave with the same intensity will greatly increase the compression ratio.

According to the calculation and estimation of the theoretical team, with the z-wave intensity of the second experiment, the space compression ratio will even reach about [-] times, that is, the superconducting material will be compressed [-] times.

This is definitely an astonishing value.

However, the experiment is not to perform high-intensity space compression on the superconducting material, but to perform a lower-intensity compression, in order to hope to detect the superconducting anti-gravity characteristics of the compressed superconducting material.

Therefore, the compression ratio is determined to be between one and five times.

Then the release intensity of the z-wave experiment can be said to show an exponential decrease, even if it is also compressed by five times, because there is only superconducting material in the area, compared with the second experiment, the release z-wave intensity can also be reduced by [-] more than double.

Because most of the energy in the z-wave release device is used to start the device, the intensity of the released z-wave is not directly proportional to the energy consumption, but because the released intensity is low, the energy consumption will be greatly reduced, and only the power generation of the experimental group is needed The machine is done enough.

Therefore, the scale of the experiment is still very small and will not affect the surrounding area. After submitting the application report, the superior directly approved it, and at the same time gave the permission, explaining that the small experiment used for theoretical research only needs to be tested. It is enough to make a report later, and there is no need to apply for an experiment.

While the z-wave experiment team was carrying out the experiments, the high-level departments also held meetings on z-wave experiments, space compression materials, and spaceship programs.

Among them, the new materials produced by z-wave experiments are the key.

High-end material manufacturing is just too important.

For the development of science and technology in various fields, the first thing that needs to be used is materials, and material technology is very critical in everything from space exploration to chip manufacturing.

The level of domestic high-end material manufacturing has always been far behind that of the country. High-end materials in many fields cannot be manufactured at all, so they need to be purchased from abroad.

For example, aviation manufacturing.

Some domestic self-developed aircraft even rely on imported materials for their skins.

Therefore, the technical development of high-end material manufacturing has always been an area of ​​focus. There is an international saying that it will take at least decades of development for domestic material manufacturing to catch up with the international top.

This is a fact.

In the past, even if the country did not accept it, there was no way to do it, but now the way suddenly came out.

The development of science and technology has always paid attention to overtaking on curves, because if you follow the path that others have walked, there may be some set obstacles ahead, which can almost be said to be impossible to catch up.

Now a new type of high-end material manufacturing technology suddenly appeared, and the physical properties of the materials produced by this technology easily surpassed the international top, and even reached incredible levels, so it naturally became the top priority of research and development.

A high-level conference on z-wave compression technology focused on 'compressive materials' that could produce ultra-high performance.

After Ruan Wenye, the representative of the experimental group, made relevant summaries and presented a nickel-iron alloy with a melting point of over [-] degrees Celsius, the meeting almost unanimously passed the decision to increase investment in research and development of z-wave technology and develop compression materials.

This is the use of z-wave generators to specially manufacture compressed materials used in various fields.

Of course.

It will be used internally for a short period of time, and it may be considered for civilian use only after the technology is truly mature.

So the experimental group split up a few people and worked with other departments to manufacture the second large z-wave generator, which was specially used to study compressed materials.

The experimental group did not change much, just sent a few people to help and explain.

Ruan Wenye is the leader of the expatriate team, and Ruan Wenye is in charge of similar external work, and he has left the theory team for the time being.

However, Ruan Wenye's departure doesn't seem to have any effect, because the core of the experimental group is still limited people such as Zhao Yi and Zhang Qican. The mathematical physics experts from the Institute of High Energy and the Academy of Sciences who joined later also have a deep understanding of the z-wave theory. Ruan Wenye The level of ability is relatively mediocre.

Afterwards, the high-level department held several meetings in a row, all discussing the Z-wave experiment group, material technology, and the spaceship program, but the spaceship program did not have much discussion, mainly because there are two, one is space The spaceship project is too large, involving too many technologies, the huge research and development plan, and the mobilization of funds are all problems, and it must be steadily promoted step by step.

The second is that the spaceship program still lacks core technology--

Nuclear fusion device.

There are no problems with the technology and design of the current nuclear fusion device research and development. The key to the problem lies in the materials, especially the parts that are in contact with the internal reaction and the parts at the output end. The materials are unqualified and cannot withstand high temperature, high pressure, and high radiation environment.

If the performance of the material is not up to standard, the fusion device cannot continue to operate.

Chen Zeshu has always been troubled by material issues, but what he didn't expect was that when he was invited to a high-level department meeting, he would get such a message, "Professor Ruan, the nickel-iron alloy you mentioned at the meeting has a melting point of more than [-] degrees Celsius. It is true. ?"

This data is amazing.

Ruan Wenye introduced the material in a very flat manner at the meeting, which immediately shocked everyone.

The melting point is [-] degrees Celsius, what is the concept?

Even the alloy with the highest melting point only exceeds [-] degrees Celsius. Studies have shown that the core temperature of the earth is only [-] to [-] degrees Celsius, and the surface of the sun is [-] degrees Celsius.

There is obviously a big gap between these data and [-] degrees Celsius.

In other words, the nickel-iron alloy shown by Ruan Wenye will not melt when placed in the core of the earth or on the surface of the sun. It is very difficult to dissolve it by means of technology.

Ruan Wenye nodded affirmatively, "Academician Chen, I can't lie about this kind of meeting, and even if I lie, I can't be so outrageous."

Chen Zeshu apologized, "I'm not questioning you, but it's amazing. Your z-wave experimental group, is it made by z-wave technology? Academician Zhao told me last time that his research is related to material manufacturing. Really."

"This alloy may be used in our nuclear fusion device. It can be melted and applied to the outer layer of the space cover to increase the safety of the equipment."

"You also know that what our team lacks the most is high-end materials—"

Chen Zeshu kept talking a lot.

Ruan Wenye listened for a long time before he realized that Chen Zeshu valued the materials in his hand, and he was too embarrassed to ask for it directly. He laughed and said, "Academician Chen, nuclear fusion research is a key project, and Academician Zhao is also very concerned about it. What else do you need?" , You can contact the experimental group to solve it. In addition, it was not said at the meeting that a new large-scale z-wave device will be built for the research of compressed materials. The z-wave device of our group is mainly used for theoretical research. "

"I know too." Chen Zeshu said shyly, "Isn't it too late? Okay, when I get back, I'll let—"

"Forget it, I might as well go directly to the experimental group."

Many materials in the nuclear fusion experimental device are unqualified, but in the international arena, no suitable materials can be found at all, because the requirements are too high.

For example, output.

Because the output end is not covered by the space cover, it will be impacted by neutrons. The neutron impact in nuclear fusion is much stronger than ordinary radiation, and the material has high requirements for radiation resistance.

At the same time, the output end must withstand high temperature and high pressure. The nuclear fusion research team has demonstrated that the section that is in contact with the internal reaction needs to withstand a minimum temperature of [-] degrees Celsius.

Even if a material with a melting point of [-] degrees Celsius and strong radiation resistance is used, it is difficult to say that it is qualified, because the material needs to withstand harsh environments for a long time, and it will not stop, so it must be guaranteed to react without any damage.

Therefore, the material is required to have a higher melting point and stronger radiation resistance. It can be said that it is at least one grade stronger than the minimum requirement.

This material arguably does not exist.

After the meeting, Chen Zeshu continued to participate in two small meetings, and immediately decided to go to the experimental group when he was free.

He first had a direct conversation with the people in the experimental group.

Chen Zeshu wanted to find Zhao Yi, but it turned out that Zhao Yi was doing research patiently, and couldn't wait to talk to the technical staff who were connected. After hearing a series of requirements from Chen Zeshu, the technical staff felt very headache, and the direct reply was, "If you can Apply for a special experiment, your group can transport the original materials to the experimental group, and then conduct a special experiment, after compression, the physical properties of the material will be greatly enhanced, and maybe it can meet the requirements."

This reply made Chen Zeshu a little surprised. He didn't understand the method of making materials for the Z-wave experiment, so he simply agreed and typed the application, and then went directly to the location of the Z-wave experiment team.

At this time, the experimental group was doing frequent compression experiments on superconducting materials. Zhao Yi led the theoretical group to conduct a series of conclusion analysis based on the experimental results.

Five experiments have been completed. After five experiments, the experimental group encountered a problem. There was a problem with the internal generating device of the large z-wave generator, and the parts had to be replaced.

After the technical team discovered the problem, it made a report about the failure, "Because the z-wave will affect the generating device, some components will be affected and compressed, resulting in serious damage to the internal seal of the generating device."

This problem was thought of before, but because of the continuous experimentation, it has not been paid attention to.

It must be taken seriously now.

Zhao Yi decided to replace the temporary parts and conduct a large-scale experiment, "Even if it is only done once, we will use this experiment to manufacture related compression materials to protect the z-wave generator."

This approach is to update the material components of the z-wave generator.

After the relevant components are updated, the z-wave generator's ability to withstand z-wave shocks will be greatly enhanced, and similar damage will hardly occur in the future.

There is a saying that sharpening a knife is not a mistake in chopping firewood. First do the work well, and then conduct related experiments. The experiments will be more frequent and the experimental data will become more accurate.

at the same time.

The past five experiments were enough for Zhao Yi to figure out the problem of the magnification of particles against space compression.

The theoretical group used six experimental data before and after, and obtained two possible results.

When the superconducting material is compressed by 2.9 times, the anti-gravity property of the superconducting state cannot be detected. At the same time, when it is compressed by 2.1 times, the weak anti-gravity property of the superconducting state can be detected.

Zhang Qican made a research summary, "So, one possibility is that the particle is compressed against the space absorption capacity, showing a power-level reduction. If it exceeds about 2.2 times, it will no longer be detected."

"In addition, there is another possibility that, between 2.1 and 2.9, there is a magnification number that can make the particles completely resist the space absorption characteristics."

Here are the results of the two analyses.

Zhao Yi used the ability of causal thinking to get a more accurate conclusion. There is indeed a "critical value" for compressing particles to resist space absorption. When the critical value is exceeded, the particle's ability to resist space absorption will reach a balance with space extrusion. .

This kind of balance is like a shield, which can directly resist the slashing of the sword, because the sharpness of the sword is fixed, and the strength of the shield is higher, it is still placed there, and it is still unbreakable. In other words, it still achieves a balance with the slashing of the sword.

Zhao Yi obtained the critical value of particle compression, which is more precise than the experimental deduced data, and the interval is between 2.65 and 2.73.

For the numbers in this interval, you can immediately think of a special --

The natural constant, e, is approximately equal to 2.718.

Create a question --

[Compressed particles resist space absorption and achieve the minimum magnification (critical value) of equilibrium, is it equal to the natural constant e? 】

[a. Equal. 】

[b. Not equal. 】

["Law of Karma"! 】

[Answer: a. 】

Chapter 6 and One Dark matter does not exist!

In the history of human development, mathematics and philosophy have developed together, and both have a common characteristic, which is to pursue deeper laws through superficial phenomena.

In the distant ancient times, limited to the level of human cognition of nature, God is the supreme existence, no matter which nation's history, there will be content related to gods.