Rule department scholar

Finally get results.

The content of the results released by the 307 steel plant caused a sensation. There are two main improvements in k03a, one is 'the corrosion resistance has been increased by about 20.00%', and the second is 'the melting point has been increased to 1431 degrees Celsius'.

The corrosion resistance of the turbine blade material is not as obvious as the melting point, but it is directly related to the service life of the material. Only high corrosion resistance can have a higher service life, but how long it can be used still needs to be substantial For verification, the theoretical calculation is somewhat unreliable.

More people are concerned about the 'melting point increase'.

Aviation Group is the most concerned about the results of turbine blade materials. After seeing the news, they were surprised and became very excited, because the improvement of the melting point of the material means that the performance of the self-developed turbine engine will improve, and it can even catch up with the international advanced technology. level.

This is crucial to the development of domestic aviation technology.

Liu Jiankun, the chairman of Aviation Group, immediately called the 307 steel factory and personally congratulated them on their latest achievements. He immediately thought of Zhao Yiman and felt relieved, "Believe in Zhao Yi, it is the right thing!"

"Zhao Yi participated in the research and development, and there will be results immediately!"

"How long has it been!"

The Science and Technology Department also has this feeling. Before Zhao Yi applied for the research and development project of turbine blade alloy materials, he chose the nickel-iron alloy. The project application report he wrote was to continue research and development along the direction of k03a. They directly allocated funds at the beginning. Later, I also consulted the turbine group, the Institute of Metal Research, and the Institute of Aeronautical Materials. Several well-known experts in alloy materials were not optimistic about the research and development direction of nickel-iron alloys.

However, the project has already been approved, and it's too late to regret it. What's more, the other party is Zhao Yi, so they still have expectations.

The results of it?

In less than a month now, the 307 steel factory, under Zhao Yi's suggestion, improved the manufacturing process to greatly improve the performance of k03a.

This is the result!

There was also a discussion within the Science and Technology Department, "I heard that Academician Zhao spent money to build a metal materials laboratory after receiving the funding. He thought it was hopeless, and the money was wasted, which is tantamount to supporting the construction of the university. .”

"I didn't expect it, so fast, such a major achievement, 2000 million, it's worth it!"

"It's really worth it!"

"The funds should not have been spent, right? I paid attention to it two days ago, and only declared more than 800 million, most of which were for new equipment."

"There are still 1000 and [-] million left!"

"Eight million will produce results, Academician Zhao is high efficiency!"

"With the improved k03a, our turbo engine can catch up with the international level!"

"..."

Many people think that the performance improvement of k03a is the research and development result of Zhao Yi's application project.

In fact, Zhao Yi's research has not yet started.

He is in the metal materials laboratory, discussing the issue of rare metals with Shen Binghe. The addition of rare metal rhenium is a new research, and it is also a very high-end research, which must be demonstrated in detail.

Zhao Yi didn't know where to start, he had to have a few "staff staff" to demonstrate the design and conduct several experiments before he could get enough conditions and know how to add rhenium to improve the performance of k03a.

Li Rongmao is adjusting the equipment in the operation room. The new equipment is just like a new car. It must be run several times to get used to it. Only after the 'warm-up exercise' is completed can it play a good role.

The work of debugging equipment is still very easy, and he will sit in front of the computer when he has time to read news in related fields.

Li Rongmao enjoys this kind of leisurely working environment, which makes him feel very relaxed. In just over a week, his external spirit has changed.

When browsing the latest news, he saw the results released by the 307 steel plant.

"The performance of k03a has been improved?"

"Academician Zhao's suggestion? The melting point has reached 1430 degrees Celsius? Are you kidding me?"

Li Rongmao opened his mouth wide in surprise. He has been doing research and development of alloy materials, and he understands the concept of 1430 degrees Celsius better than others. They have studied single crystal nickel alloys so far, and have produced alloys with the highest melting point, which is only about 1200 degrees Celsius.

This is already quite high.

It is precisely because of the development of a single crystal nickel alloy with a melting point of 1200 degrees Celsius that Peng Engui dared to tell reporters, "It is only a matter of time before the development of a single crystal nickel alloy to replace k03a."

It is still a matter of time.

The difference is that the previous time was a few months or a year, and it was three or five years after the last promotion, and now it is...

"ten years?"

"is it possible?"

"If you're lucky, five years is possible, but it will take five years at least. If you're unlucky, there's no hope for ten years!"

Li Rongmao made a judgment, and suddenly thought of a question. He was recruited by Zhao Yi to the metal materials laboratory for the purpose of doing nickel-iron alloy research and development projects, but it seems that the project has ended?

He carefully read the result news released by the 307 steel factory several times, and still came to the same conclusion, "Academician Zhao has completed the demonstration, which greatly improves the performance of k03a."

"Is the project ready to end?"

"But... I don't seem to have done anything, and I don't even know what Academician Zhao's suggestion is..."

Li Rongmao felt that he should do something, otherwise he would come and join the team, and it would be over if he didn't do anything. It seemed that he was completely useless, and he was not the kind of person who sits on success.

He stood up suddenly, and ran to the office to find Zhao Yi, "Academician Zhao! Academician Zhao!"

"what happened?"

Zhao Yi turned his head in doubt and asked.

"Have you read the news about 307? The performance of k03a has been greatly improved, and its melting point is as high as 1430 degrees Celsius!" Li Rongmao said excitedly.

"Have you seen it?" Zhao Yi nodded.

Shen Binghe said, "Just now there was a phone call to congratulate Academician Zhao. I was also surprised at first, but..."

He stood up and patted Li Rongmao on the shoulder, "Don't get excited, it's all normal. Academician Zhao!"

"Oh~"

Li Rongmao agreed dumbly, and then immediately asked, "Then what else can I do?" He felt that he had failed, and he didn't participate in it at all, and thought for a while and said, "Academician Zhao, the results report should not be written yet, right? Can I see your proposal report?"

"Suggestion report? What's the use? Isn't it already verified?" Zhao Yi asked a little puzzled.

Li Rongmao asked with a puzzled face, "Shouldn't it be writing a paper after you have achieved results? If you don't publish it, you have to submit a research and development report to your superiors, right?" He refers to a document similar to a 'project report', which is submitted to explain the research and development process , explain the process of argumentation, etc.

A simple review will be performed above, and then the report will be archived.

These will be important 'records of the research and development process', which are equivalent to the 'archives' of project research and development. It is best to record them in detail, so that they can be consulted by others in the future, and when the results are published, they can also be published as papers.

"This one……"

Zhao Yi didn't think about this problem at all, he didn't think it was a result at all, even if it was regarded as a research and development result, he didn't plan to write any "project report", because some of the parts involved in the correction couldn't be explained at all, because some places were The "Supervision Law" discovered that the "Supervision Law" can detect abnormalities, and even find a solution directly, which does not mean that the "Contact Rate" can be used. Even if it can be used, it will consume a lot of energy.

At that time, he discovered the problems during his visit to the manufacturing process of k03a, and he just recorded the places where the problems occurred. He would definitely not waste any more energy to understand the "manufacturing process correction principle".

"This...forget it, what a waste of time to write a report!" Zhao Yi said indifferently.

"The project report is very important!"

Li Rongmao is much more serious about problems, "The project report is a record of the research and development process."

"Academician Zhao, you are great. You don't care about the results of an alloy material, but making project research and development records is to leave experience for future generations. For example, other people involved in the project, such as Director Shen, can also sign their papers in the future , for us ordinary researchers, papers and results are very important."

Zhao Yi nodded with a smile all over his face. He felt that what Li Rongmao said was very reasonable. He was indeed great, but he also had to think about other people.

Shen Binghe didn't know how to react.

He agreed with what Li Rongmao said, but the expression of "our ordinary researcher" sounds very uncomfortable.

Li Rongmao didn't wait for the two to respond, and immediately said, "Well, Academician Zhao, you must think that writing a report is a waste of time. I didn't do anything here, just report according to your suggestion, try to write a project report."

He said and explained, "First, I want to learn and see what questions you have raised. Second, I also want to write it for you to see, to prove my level of argumentation."

After hearing this, Zhao Yi thought for a while, and suddenly felt that recruiting Li Rongmao was really the right move.

The difficulty of writing the project report was that he couldn't explain why he made those suggestions, but Li Rongmao came to his door and said to help him 'explain'.

This is an excellent employee!

"Makes sense!"

"That's how it is. Thank you for your hard work, Professor Li! I'll take a look when I'm done writing. I can't talk about giving pointers. It's fine if there are no major problems."

"I believe you!"

Zhao Yi immediately made a final decision, and he continued, "But writing the report is just a side job. Contrary to what you understand, the research and development I planned has just started, and hasn't even started yet."

"what?"

This statement is too unexpected.

The 307 steel factory released the news of success, and many people in the industry came to say congratulations, but the research and development work has not started yet?

Li Rongmao didn't understand, he said weakly, "k03a, the performance is already very good, right?"

"It hasn't started yet!"

Zhao Yi said with certainty, and then looked at Shen Binghe, meaning that he was here to explain.

Shen Binghe said, "It's like this. You joined late, so I don't know. Our research and development plan is to do research on adding rare elements based on k03a's improved performance."

"rhenium?"

Li Rongmao reacted immediately.

"Correct!"

Li Rongmao couldn't help but swallowed a sigh of relief. The research and development of adding rare elements to alloys is very high-end. The domestic alloy material technology accumulation is small, and the gap with the international level is still relatively large. Many materials containing rare elements need to be imported from abroad. This is because there are too few related studies.

In fact, the root cause is still 'insufficient accumulation'.

Many research and development related to alloy materials in China are in the initial stage. The alloy materials in the initial stage do not use rare elements at all. Improving the ratio of elements, manufacturing process, and technology is enough to greatly improve the performance of materials. Adding rare elements It's a bit too extravagant.

The rare element is to make the material "a hundred feet tall and go further", but the material is only fifty feet, and there is still a lot of room for simple improvement, so there is no need to use such high-end things.

Peng Engui's team has also done R&D work on the addition of rare elements to alloy materials, but it is simply 'involved'. After two experiments, the performance of the material has improved a little, but it does not match the cost at all.

For example, if a material is added with rare elements, the performance is improved, and the cost is directly doubled.

Another similar material only improves the process, or the manufacturing process is more rigorous, and the cost is only increased by [-]%, and the same performance effect is achieved.

How to choose?

No choice at all!

Even if it is an alloy material independently developed and produced in China, the performance is only moderate, but the cost is much higher than that imported from abroad, so it has no value at all, because the performance is only medium material, the probability of being stuck is very small, and it can be replaced There are also many products.

In short, the research on adding rare elements to alloys is definitely very high-end, and it is also very expensive.

Li Rongmao looked forward to it.

Often like this kind of high-end research, each experiment must go through repeated demonstrations to find out the most likely method to improve the material, and then conduct an experiment after discussion.

So Li Rongmao immediately asked, "Academician Zhao, when will we start the argument?"

"Argument? Argument for what?"

Zhao Yi asked back in doubt, and immediately said, "I've already figured out how to do it. You are all experts in alloy materials. Everyone should study the latest k03a, and then design a method of adding rhenium to it."

"If there are no major problems, just conduct experiments according to your design. Do this at the beginning, and you will gain experience after several times."

"what?"

"Each of us?"

This time even Shen Binghe was stunned.

"Correct!"

Zhao Yi nodded very positively, "This is the method. Everyone has to design the addition method, and then directly enter the experimental stage. Zhang Hongtao and I also talked about it. They made two plans, and we made two."

"First design and conduct four experiments, look at the data, and make adjustments later!"

Li Rongmao grinned as he listened in a daze, and then looked at Zhao Yi as if he was looking at a "scientific research tycoon".

"Each experiment can easily burn hundreds of thousands, right?"

"Let us do the design, without complicated arguments, and directly enter the experimental process?"

"One per person, four times?"

Li Rongmao suddenly had the urge to cry bitterly when he thought of the days when he was under Peng Engui, hoping to save R&D expenses by comparing fingers.

There is no comparison between people.

There is a big gap between teams and teams!

Chapter 433 Zhang Gangchuan: Today is not April Fool's Day!

Zhao Yi left.

Only Li Rongmao and Shen Binghe were left in the office. They were thinking about the research and development method that Zhao Yi just mentioned, and they felt a sense of being extremely trusted.