my app store

Chapter 216 Design
There are two versions of this mobile phone with different operators. After all, the era of mobile Internet has just begun, and full Netcom has not yet become popular.

Although some claim to be all-netcom, in fact, only the chip supports different frequency bands, and it is impossible to realize the real all-netcom.

If you want to realize the true full Netcom, you still need to wait for the advent of the 4G era. At that time, full Netcom will be the general trend.

Unfortunately, it's still a few years away.

The internal structure and stacking of the mobile phone were completed by a team led by Yan Sheng. After all, Yan Sheng was a structural engineer for Motorola and had a lot of experience in this area. The team he led was very efficient.

This time, Qualcomm's old chip was used, and the technology was basically mature. Shen Yi's employees and Qualcomm's engineers had already fully grasped the intellectual property rights of this chip.

It can be controlled when used.

If you can't control it, the CPU will heat up severely.Then it triggers frequency reduction, and then heats up and affects the GPU, which will directly become very stuck and reduce the user experience.

Shen Yi knows that there is a company that likes to stack cores, and other chip manufacturers still have four cores, and when they have eight cores, they have ten cores.

Although the performance of their design on this surface is very strong, it seems to be much easier to use than other manufacturers.

The final experience is very poor, because the performance is too strong to suppress heat dissipation, and then the GPU is affected, resulting in very lags.

So this chip manufacturer has directly become a joke in the industry.

Some netizens even laughed at them, saying that the other two cores are responsible for the main work, and the other six cores are responsible for small tasks.

But this chip manufacturer is a core job, and the other nine cores are onlookers.

I also kindly made a lot of pictures to show.

After they learned their lesson, they became much more honest and no longer made those vain multi-cores, but the impression left on consumers was still that of high scores and low energy. Until 2020, many people mentioned that on the field Chips are still talked about in disgrace.

They suspected that those who suggested using this chip manufacturer were trying to harm him.

With Shen Yi's technology, he can completely control it.

In addition, the Mengyuan system is originally an OS that takes up very little system memory. Shen Yi is confident that after this product comes out, it will completely abuse other manufacturers' mobile phones in terms of fluency and use.

Of course, this opponent except Apple.

After all, in addition to the system, Apple's hardware is also very good, and the chips used are developed by Apple itself.

...

When the hardware team starts to integrate the components, the appearance starts to be designed, which is carried out simultaneously without conflict.

Shen Yi does not study industrial design, he can design a simple driving recorder casing, as well as UI interface and icons.

But the design of the mobile phone is not something he can complete. After all, it is not only an appearance, but also a stack of hundreds of internal components.

He can only draw a picture, and then let the designers follow the design.

Shen Yi's design is also good, even if it is not as beautiful as the iPhone 4, but in comparison, the appearance is enough to crush all the Android flagships.

The front of the mobile phone is symmetrical in size up and down, and the four corners are relatively round and beautiful.

A circular bar-shaped earpiece hangs above the screen, and the buttons below are all touch-sensitive, just like ordinary Android phones.

The overall material of this mobile phone is plastic, including the middle frame and the back shell. The back shell can be disassembled to replace the battery. To insert a TF card and a phone card, you need to disassemble the back cover.

Even so, it's still beautifully designed.

On the back of the phone, there is a camera in the upper middle, a flash light below the camera, a logo below the logo, and a speaker below the logo.

In short, the design of this phone is quite satisfactory.

There is no Apple 10 released in June 6 that can bring consumers a sense of visual shock.

You may not feel anything when you just see that product, but if you compare mobile phones from other manufacturers at the same time with Apple phones, you will find that other mobile phones are really ugly.

In other words.

Apple's design is still a bit ahead of its time.

Android only used their design in 2014.

However, their glass back covers are fragile and not as durable as plastic ones.

Later, these companies gradually gave up plastic materials on high-end phones for the sake of good looks and feel, and instead used glass to enhance the texture. Some manufacturers even used zirconia ceramics.

However, while improving the texture, it also makes the back shell of the mobile phone easier to break, and it's fine if it's easy to break.

It will cost a lot to repair after it breaks.

If it is official, it would cost hundreds of dollars to replace the glass back cover. At the same time, some people saw this business opportunity and produced some of these mobile phone back covers to sell.

Usually sold for tens of dollars.

But how much does the glass cost?
Moreover, although the steps of changing the glass back cover are simple, most people don't want to do it, because in the eyes of laymen like them, changing the glass back cover is very troublesome.

In fact, it can be completed in less than 20 minutes. After all, the steps are just a few steps. Even if you don’t have professional tools, some Taobei stores that sell back covers will give them away.

After using those attacks and then using the hair dryer at home, you can change it yourself.

Even so, many people are unwilling to do it.

Therefore, helping people change the back cover and film of the mobile phone has also become a means of survival for some people.

Some people even say that the glass back cover has even become a means of profit for mobile phone manufacturers.

The film also supports a large number of practitioners in the mobile phone industry.

The power button and volume button of this phone are on the right side of the phone, with the volume button on top and the power button on the bottom.

The charging interface is in the center right below, the 3.5 mm headphone jack is at the top, and next to the headphone port are the microphone and antenna.

The design is very neat, and it is quite beautiful compared to other mobile phones now.

At this point, it is almost complete. Next, you need to take this mobile phone to the Ministry of Industry and Information Technology to register it and obtain a network access license.

There is also a need for 3C certification. Shen Yi's company has produced so many 3C-certified electronic products in the past, and now this is naturally a no-brainer.

The factories that Shen Yi bought still couldn't process mobile phones, after all, they were just some small foundry factories for electronic products, and if you want to make a foundry, you still need to look at Inventec.

This company used to be an OEM for Nokia and Motorola, but with the decline of these two mobile phone companies, they received fewer and fewer orders.

This is a relatively mature mobile phone foundry, and Xiaomi has also placed an order with them.

Shen Yi also makes mobile phones here, and it's not that he doesn't want to do it locally. Most of the local factories that can make mobile phones are already full of orders.

If someone else does the OEM, the quality control will not be so good. Shen Yi's goal is to have his own mobile phone OEM factory in the short term, and be able to control the output and quality of his own mobile phones.

(End of this chapter)