The Treasure Hunt of an Antique Dealer

Iron swords and iron knives, Zhang Nan had encountered several times when he was a tutor in his previous life, and they were basically rusty and could not sell for a lot of money.

I'd rather run into a bronze sword with ordinary craftsmanship than dig out the original peerless steel knife. This earth is not at all polite to steel. No matter how beautiful you were at the beginning, it will be **** when you enter the soil!

Later, when dealing with construction sites, I was basically in the south, and the chance of encountering iron swords and swords was even higher: there were many tombs in the Jiangnan region from the Eastern Han Dynasty to the Jin and Southern and Northern Dynasties, and in that era, as long as they were able to build brick chamber tombs. , All of them are powerful!

At the beginning, these tycoons, whether they were high-end goods in the capital or rich natives in the countryside, personal combat effectiveness or madmen of Wei-Jin style, seemed to wear swords when they went out: You can refer to "Romance of the Three Kingdoms" for this item. No matter whether it is Lu Bu, Zhao Yun, Cao Cao, Zhou Yu or Guo Jia, a sword on the waist is standard.

identity!

Knives are used in warfare, and swords are used as ceremonial goods. They can kill individuals or resist at critical moments. The original swords were not the thin iron sheets of modern old ladies.

You have to wear a sword to live, and to bring it into the tomb when you die. As long as it is a brick chamber tomb where a man was the owner of the tomb at that time, it is a decorative dagger that is less than 40 cm in length, or a murderous long sword that is one meter in length. , There is an iron sword buried in this tomb in all likelihood.

It is a pity that there are many acid soils in the Jiangnan area. The iron swords that were put into the burial chamber 1,5,6,790 years ago were rotted into slag. Even if a few of them weren't bad enough, they had no economic value.

Seeing more iron swords and iron swords of the ancient Han people, it was the first time that the Xiongnu's equipment came across: iron swords, which were very rusty. At first glance, they were totally unrecognizable, but they were not as bad as their cores.

Counting the blade, this length can be close to one meter, with a very slight arc, a thick arc back, a medium width arc blade, and the blade is curved inward. The shape is just the opposite of the Mongolian sword after 1300, and it is more like the Ottoman Yatkan later. The extended version of the knife seems to refer to the ring head knife of the Han Dynasty.

The scabbard may be made of leather and wood. The organic matter has long been rotten, and the copper-shaped blades and small Jomon copper rings on the front and back of the rusted blade are still there.

Take the knife out of the sheath, don't think about it, get up after taking a picture, and hold it in your hand, and feel that the weight seems a little heavier to yourself.

This is the weight after rusting in 2000. If the knife is still intact, it will be more important to people with arms like Zhang Nan.

The shape is still there, but at first glance it looks like a bad iron bar.

Zhang Nan is a tutor in his bones, but he has no habit of caring for foreign cultural relics, let alone a rotten iron stick.

Switch to holding the iron bar in your left hand, and take a small shovel in your right hand and knock on the iron bar of the knife strip.

"Ding, Ding" twice, Zhang Nan's eyes lit up and shouted at the top of the tomb: "Hand the military bayonet down!"

Buried in the ground for about 2000 years, the soil here seems to corrode ironware much less than the acidic soil in the Huaxia Jiangnan area. This knock actually knocked out the sound of gold and stone.

It can be knocked to distinguish whether a sword is good or bad, of course, you can't knock it randomly, just tap a copper key to distinguish it.

The business of bad knives is broken and dull, like "poof, poof"; the sound of good knives is clear, and it is pleasant to hear.

I knew this trick in my previous life, and I also have some good swords in my life in this life. I can tell whether it is good or bad with this knock: this Huns knife looks very badly rusted, but the inside is okay.

Soon a scabbard dagger was sent down. The AKM3 bayonet equipped with the AK74 is a good knife. Not only is the design reasonable, but the blade hardness is also super high: the blade hardness of the military bayonet blades around the world is generally between 56 and 60 Rockwell hardness. AKM The blade of the multi-function bayonet is forged with high-carbon steel, and the Rockwell hardness can reach 62!

Here Zhang Nan wants a bayonet, and the three bodyguards on the side know that the boss is going to destroy it 100%: Why do you use the bayonet?

When used as a scraper, scrape the Huns' knife!

Sure enough, the bayonet scabbard was thrown aside, and he scratched the rusty unearthed knife while holding the handle!

Very skillful, the rust falls down like rain, one layer is scraped.

It's like a craftsman who makes bamboo silk brooms in his old home who cuts the skin of bamboo segments. That speed is fast.

No one will stop him from destroying cultural relics. Zhang Nan has the final say here. Even if he wants to explode the tomb with explosives, no one can stop him.

Living people can’t do it, and dead people who are so rotten that there are no bones left will have no objection. He cuts as much as he wants: he wants to know what swords the Huns used 2000 years ago, and the quality of the iron swords used by this nobleman. Regardless of what others think.

The blade of the bayonet is not particularly sharp, but it is hard enough!

The rust went away quickly by scraping, and the blade was scraped to reveal the essential metallic luster of the Xiongnu iron knife. After scraping for a while, a large area of ​​rust was removed: the bright color of the steel was exposed, even if there were densely packed blades on the blade. There are small rust pits, and it has gradually changed from an iron rod to the smell of a knife.

Scrape vigorously. If the sharpener in my hometown uses a large industrial broken hacksaw blade with a special wooden stool, the work will be faster.

The hand was a bit sore, he stopped, took a closer look at the part where the rust was scraped off, and then glanced at the bayonet blade in his right hand.

Damn it!

The blades of the bayonet have very obvious signs of wear. No wonder it is so laborious: this iron sword of the Huns was definitely a treasure back then, made of high-carbon steel!

Holding the old and new knives, and beckoning others to continue digging, Zhang Nan climbed up the ladder again.

After taking a bottle of mineral water, he walked to the side and called for Guan Xingquan's help, poured water on the knife, and sat on a rock to hold the long knife strip against the bottom of a pine tree and continue to scrape the rust.

No one asked him why he couldn't get through with the old iron knife. The boss liked to scrape and then scrape. The Russian soldiers who worked were even less interested in it. They were all busy digging in shifts.

Quick scraping, slow scraping, rough scraping, fine scraping, and then let people take some finer emery cloth and files: there is definitely emery cloth in the engineering camp, even if this trip is a field training, those engineering vehicles must have emery cloth and various Various types of files.

Sure enough, there are several models of emery cloth. As for the files, there are some forty centimeters long, and there are also pocket files with a length of 15 centimeters, complete sets, and various shapes.

After using the knife with a file, the long stem of the knife seemed to be held with both hands, and the bayonet was scratching awkwardly.

I scratched it and finished it. I polished it with sandpaper~www.wuxiaspot.com~ I did it very carefully. I was too lazy to pay attention to other things coming out of the two burial tombs.

The two of them were busy for more than an hour, and finally washed them with water, then dried them with a towel, and burned them directly with an alcohol blowtorch to get damp.

Wrapped the stalk of the knife with a small new towel, Zhang Nan held the knife in his hand and smashed it a few times before saying to Guan Xingquan: "That dead ghost can have you at least, and now I feel a little heavier. Point, the barbarian must have been a strong man when he fought the war."

After hearing that Guan Xingquan motioned to give him the knife, he also tried the feel, "Fortunately, it's just that I can calculate it with more hands.

I think you want to bring it back to polish and open the front, with a handle and scabbard?"

"Then absolutely, the saber 2000 years ago can hack someone to death, who has it?"

This knife was originally a thick and medium-width blade. The thickness and width of the blade left after two thousand years of rotten are still in the proper proportions of a long knife. According to the concept of a modern sword, it is slightly wider.

If you let the master swordsman deal with the blade again, the proper handle is a good knife: this is not an "ancient steel sword" that is forged and two or three rotten iron bars are combined into one handle. It is just a surface reprocessing and maintenance. Do a quenching when opening the front.

Where can I deal with this knife again?

Anyway, I won't go to the little devil's place, but it seems that the revival of ancient swords in China's Jiangnan Longquan has not been blown, but the United States and the Middle East have good ancient sword repairers.

If you have money, you can do whatever you want.

At this time Nong Bosheng walked over and expressed speechlessness to Zhang Nan's masterpiece, but when he took the knife and saw it clearly, he said with a little excitement: "This is a shank road knife!"

Please remember the domain name of this book's first publication: .. The fastest URL for mobile version update: m.

Please remember the domain name of this book's first publication:. 4Fiction website mobile version reading URL: