The Life of a Gangster That Started In a Gun Shop

Although there are many tones that can be distinguished in the aurora, they are normally seen with the naked eye. There are mainly only six colors.

They are: red, yellow, pink, green, blue and purple.

The most common aurora is mostly green, but for the consideration of firing the first shot of painting. Ye Qing set the target on the rare purple.

Purple itself is a color that is easy to bring infinite reverie, and it is matched with the dark night sky. Undoubtedly a very good choice.

After determining the target, Ye Qing entered the system training ground to try out the color matching. Speaking of which, another benefit of the system training ground is reflected.

Save money, though $100 an hour isn't cheap. But compared to the infinite refresh of materials, $100 is a drizzle.

Considering that gun paints mainly use acrylic, Ye Qing chose acrylic paints for coloring.

First, brush a layer of black primer on the gun and wait for it to solidify. Ye Qing began to squeeze purple paint on it. After thinking about it, Ye Qing squeezed in a bit of green and a bit of blue as a mix-and-match color.

Finally, he took out the brush and brushed it away, and then replaced it with a wide brush dyed with white paint and swiped it twice, making the originally rich color become hazy.

Don't say it, just like this, it's really a little aurora!

Seeing that his first attempt was quite effective, Ye Qing's guts couldn't help but get fatter. Thinking of Cabot's mirror-finished M1911, Ye Qing suddenly felt that if the aurora had a mirror-like reflection, the effect would be even better!

Thinking of doing it, I saw that the color palette was almost complete. Ye Qing waited for a while for the color to solidify, then smeared polishing paste on it, then took out 5000 grit sandpaper and started polishing.

It was just after a while, Ye Qing felt a little dazed.

The picture that could have been seen as an aurora at first has now completely turned into a mess. What a black paste!

Ye Qing, whose face was a little darkened, waved his hand to make this terrible failure disappear in front of him.

Mirror processing technology, to put it bluntly, is to polish off the subtle roughness of the metal surface. Now the metal is painted with paint, and the polishing paste applied again cannot touch the metal surface at all, so it is polished like this.

Not to mention grinding off the rough surface, not making the metal surface even rougher, that is the blessing of the Buddha.

After thinking of this, Ye Qing almost couldn't help giving himself a big mouth. This kind of basic craftsmanship has just been forgotten.

But it's clear to understand, sometimes some thoughts come up, and it's hard to dismiss them.

With the idea of ​​​​mirror aurora, no matter how Ye Qing adjusts the color of the aurora, he still feels uncomfortable. No matter what color it is, I always feel that it lacks some visual impact.

In order to realize his idea, Ye Qing began to try gradually. First of all, if you want to achieve a mirror effect for general metal patterns, you can use high-gloss spray paint.

But Ye Qing reluctantly found after several attempts that if she used high-gloss spray paint, it would not be able to achieve the effect of aurora color mixing. High-gloss spray paint is more of a single-tone method for a mirror effect.

For this reason, Ye Qing deliberately looked for it in the system material module. I haven't found a high-gloss paint that is compatible with color mixing operations. This time, the road was completely blocked.

The first method failed, and Ye Qing started the second method again.

That is electroplating, first draw the pattern. After the pattern is solidified, a layer of metal film is electroplated on the surface, and then the metal film is polished.

Thinking about it this way, there seems to be some possibility!

Ye Qing's eyes lit up, and then he started.

Thanks to the drag system, Ye Qing directly took out the Aurora 1911 sleeve that had been drawn before, and then began to prepare for electroplating.

But Ye Qing just started, but found that the metal plating solution could not be successfully plated. After three unsuccessful attempts, Ye Qing suddenly thought of a possibility.

Wouldn't propylene be an insulator?

To put it bluntly, the electroplating process is the process of using the principle of electrolysis to coat a metal film on the surface of the material. Since electrolysis is to be used, if the material itself is an insulator, it cannot be electroplated.

"Is propylene an insulator?"

Ye Qing, whose mentality was a little broken, asked the system.

"No. But after the water in the acrylic paint has evaporated, it is almost insulated!"

Originally, Ye Qing was a little excited when she saw the first reply that appeared in the system space. But after reading the system's reply, Ye Qing was a little desperate.

Is there a difference between almost insulating and insulating? !

It seems there is, but for Ye Qing's needs at the moment, there is no difference between the two!

"Is there a solution then?"

Although Ye Qing was a little disappointed by the system's answer. But this also reminded Ye Qing of an important question, he is a systematic man, can he hang himself? !

After studying a lot, I feel that people are a little stupid... I always find a way to solve things by myself, which is a shame for the plug-in party!

"Increase the conductivity of acrylic materials!"

"I mean, how?! How to increase conductivity!"

Seeing the system's reply, Ye Qing almost didn't spit out a mouthful of old blood. If this system is controlled by artificial intelligence, then this AI must be a severely brain-dead level.

It can be solved by increasing the conductivity of the propylene material, and I know it myself. But the question is how to increase it? !

Fortunately, the system IQ was successfully launched this time~www.wuxiaspot.com~ The reply directly popped up a shopping mall window for Ye Qing.

"Nanoscale metal particles?!"

Seeing what the system popped up, Ye Qing frowned. Immediately became elated.

Yes, since the conductivity of the propylene material is not enough, adding metal particles in it will naturally increase the conductivity.

However, Ye Qing wanted to process the metal to the nanometer level without affecting the normal use of the pigment. Ye Qing thought that it was impossible with the current level of technology.

Nanoscale machining accuracy and processing metal blocks to nanoparticles are completely two concepts. The astronomical price of the nano-scale metal particles of cubic decimeter on the system undoubtedly confirmed Ye Qing's guess from the side.

"System, can we negotiate about that? You see, I can't use that much. How much is the nano-scale metal particles that only meet the needs of one gun? Can I buy it alone?"

Ye Qing's bargaining seems to have been designed into the knowledge blind spot of the system. After a while, Ye Qing saw the reply from the system.

"Twelve thousand dollars, will you pay?"

Seeing this reply, Ye Qing quickly chose no! Just kidding, I'm still in the training ground now, let's practice with the free one first!

After solving the conductivity problem of acrylic material, electroplating can be carried out smoothly.

Electroplating itself has a certain degree of reflectivity, that is, mirror effect. If you don't pursue the ultimate, it actually looks very good so far.

But thinking that the metal particles alone would cost 12,000 US dollars, Ye Qing's heart skipped a beat.

Polished! Must be polished!

​​

​​