Take Off My Aviation Era

Chapter 519: How to fight this battle?

   In March last year, several leaders in the science and technology industry proposed to the central government to formulate my country's own major scientific and technological development plan so as not to be eliminated in the fierce international competition in the future.

   Once the proposal was put forward, it received great attention from the central government, and the instructions were quickly issued. Because it was a proposal made in March 1986, this high-tech development plan was named the "863 Program."

   So far, the "Star Wars Project" of the United States and the "Project Eureka" of Europe, the target of China's "863 Project", was officially born.

As the Ascendas Group that has been tracking the latest technology in the aerospace field, it has naturally become a key unit of the "863 Program", especially in the field of new materials. It doesn’t matter how Zhuang Jianye acts. The research project was declared under the name of aerospace new material technology and was approved last month.

The first batch of research funding has been allocated not long ago, a total of 150 million yuan, which shocked Zhuang Jianye. For so many years, asking for funding is like squeezing toothpaste. It is just a little bit of pressure. How can there be such a happy time? ? And it's still hundreds of millions! When Zhuang Jianye was surprised, he finally realized that he seemed to be too buddhist, and he didn't pay much attention to it. How could it be done? You know that it's funding, and you can't get along with it.

So Zhuang Jianye took action. When Luan Heping and Ning Xiaodong knew that when Liszt was digging the wall, he ran to the capital to look for the chief and the leader. He painstakingly hoped to include all the research projects of Ascendas Group into the "863 Plan". .

   The superior leaders are not stupid. The "863 Program" is for the development of cutting-edge and cutting-edge technologies. If all R&D projects are collected, it will be nothing.

Therefore, after reviewing the materials submitted by Zhuang Jianye, the expert group of the "863 Program" only gave Zhuang Jianye three specific general directions. The first is special aviation engine; the second is aviation equipment modern assembly technology; the last is precision welding technology.

   requires each project to propose a specific development direction in order to make specific budget allocations.

Zhuang Jianye still wanted to fight for it, but unfortunately he couldn't twist his thighs. In desperation, he could only use his brains in these three directions. The first two were okay. After careful study, the focus of the aero engine special project is on the 6 MW core aircraft. Namely HX-11-6 core machine.

Because the turbofans, turboshafts and gas turbines derived from this can meet most of the light fighters, medium and long-range regional airliners, high-end business jets, light and medium helicopters, and gas power plants and small power stations for combat ships below 3,000 tons. The power required by the turbine generator.

At that time, Ascendas Group will not only spin around on drones and light and small aircraft, but can truly develop towards aircraft with a take-off weight of more than 20 tons. If it goes well, it will adopt single-engine light fighters or dual-engine medium-sized aircraft. The fighter is not untouchable.

As for the second one, there is only a pulsating production line. Although Ascendas Group has made great progress in this area, some supporting equipment has not been deeply optimized, and coordination in many places is not satisfactory. .

In addition, Ascendas Group also plans to gradually deepen the pulsating production line of aircraft, and explore the pulsating production assembly plan for aero engines and even long-range launch vehicles or missiles. Therefore, the pulsating production line of an aircraft is not a plow. , Muma Nanshan, but the first step in the long march on this path.

  Neither direction has to be said, the only uncertainty is the last one, precision welding machine technology, in addition to personnel factors, mainly due to differences in technical paths.

   Many people think that since Europe and the United States have begun to apply electron beam welding technology on a large scale, there is nothing to consider and just follow up.

   But there are also a few people who think that although the electron beam welding process is advanced, the technology is difficult and the adaptability is poor, which does not represent the future development of precision welding. They think that they should be studied in depth to find a new direction that is more in line with future development.

   The two factions are not only divergent within the expert group of the "863 Program", but also within the Ascendas Group.

   But all of these, with the breakthrough of the carbon dioxide laser of the North China Institute of Optics, put this controversy to a halt.

   Because of this cutting-edge project led by Hu Rongyi, in preliminary experiments, the weld seam of the component was reduced to 25 μm, which is 25 μm.

   What is the concept of 25 microns? The diameter of a human hair is generally 0.05 to 0.08 mm; 25 microns is equivalent to 0.025 mm. In other words, the width of the weld that Hu Rongyi and his colleagues tested is smaller than a single hair.

   Not to mention using the naked eye, even the magnifying glass can't find the weld on it.

If you stop there, the key is that the welding integrity rate implemented by the carbon dioxide laser reaches 100%, which means that the parts do not need special treatment in the early stage, and no heat treatment is required after welding. The most important thing is that there is no need for a vacuum environment, normal It can be operated under the environment, and only in special circumstances need some inert gas protection.

   This greatly expands the scope of use, and because of this, it can be used as an alternative to electron beam welding and become the leader of a new generation of precision welding technology.

Zhuang Jianye is the one who doesn’t want to run after someone else’s ass. The suffocation of chasing and falling behind is really torture. Rather than running to the dark one way, Zhuang Jianye prefers to run the serpentine bends of the famous autumn mountains. The sudden overtaking is the excitement of making money.

So at the beginning, he was on the side of the laser welding process, but there was no credible test data at hand, and the instability of the talent team caused by Liszt’s various digging walls made Zhuang Jianye only want to push the force. thought.

Now it’s alright. Not only did Peng Chuan send the much-needed experimental report, he also stood firmly on the side of Ascendas Group, and Zhuang Jianye could make a bright and bright report. Knowing that this is a large-scale research and development project that is close to 100 million yuan a year, he I don't want to just slip away from my hands.

As for the recent wave of going abroad that has swept the aviation industry, since it is going to rain and my mother is going to marry, even the higher-level ministries and committees can’t control things, Zhuang Jianye also let me take care of him without his thoughts. However, Liszt, UU, is more happy during this time. Reading www. uukanshu.com he still has to find a way to beat and beat.

   Just give four EJ9 electron beam welding machines to the end?

Has the European and American airworthiness certificate of the Plateau Eagle series been completed? Have you applied for the European and American airworthiness certificate for the dual-engine regional airliner derived from the advanced light transport platform? If you dare to show Huan'er everywhere before you finish everything, don't you know what you are?

What? How could Liszt be obedient?

It’s very simple. Because Zhuang Jianye has enough black materials, and during this period, the European actor company was gradually emptied and passed to Liszt’s hands through operations. Another big pot was pressed down. Liszt handled everything. The guys are happily making their own money. If it blows up, Zhuang Jianye has a way to make Liszt even not qualified to be a tramp.

   So Liszt, who was in the best light for a few days, was sadly urged to become Zhuang Jianye Ma Tsai, lobbying around with the products of Ascendas Group, preparing to fill this big hole.

  ……

   Just when Zhuang Jianye was busy with the internal affairs of the Ascendas Group, Zheng Quanli looked at the head of the airborne troops in front of him at an airport in the southeast coast: "That's not good!"

"What's wrong, and it's not really dead, you just let go of the fight. If you don't fight, the funding for next year will be reduced by more than half. Anyway, I have said so clearly, how can you figure it out? ."

After talking about the paratroopers, the head of the airborne troops carried his hands on his back as if nothing had happened, and walked away like this. Zheng Quanli sighed and immediately glanced at the flag of the sixth special operations battalion of the Royal Thai Army not far away, his expression became a little bit. Weird, how should we fight this battle?

  

  

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like