Take Off My Aviation Era

In the foundry workshop of the Sixth Branch Factory, Shen Jianwei stared at the station where the improved rivet mold was changed without blinking for more than an hour. He found that the payment was exactly the same as Master Peng Chuan and Master Cen said. He immediately said with a smile: "Yes. Not bad!"

After speaking, he turned his head and directed at the administrative cadre of the branch factory that came with him and said: “I will report the situation of our branch to the chief engineer, the factory director and the representative of the army stationed at the factory immediately. A leader please come to our branch to help correct me."

　　 When I heard that Director Shen wanted to invite the head of the factory to come over, Master Cen reminded him with worry: "Director, our experiment has not been completed yet. At this time, ask the head of the factory to come over, right..."

"Lao Cen, I know what you mean, but you also know that our branch needs a chance to boost morale too much. No matter what the future trials, this time it has broken through 600 times and approached the level of 2,000 times. The improvement of the buckle is enough for us to show off by patting our chests."

　　 Shen Jianwei didn't take it seriously. Compared with Master Cen who simply wanted to improve the product, taking advantage of the officer's mind to reinstate his duties, Shen Jianwei, the branch director, was much more complicated.

　　His reform was struggling at the Sixth Branch, and he was hitting a wall everywhere. Now he has reached the stage of being shattered and reorganized by the main factory. This is really unacceptable to the face-saving Shen Jianwei.

　　 If something is impossible for him, he would bow his head and admit it, but he didn't expect that there would be no way out of doubt, and the rivet mold would be improved successfully at this time.

　　 What does this mean?

His reform is not useless. His persistence is correct. The advocacy experience still has vigorous vitality. Shen Jianwei, who is not lacking in responsibility and highly politically sensitive, immediately regards the successful reform of the rivet mold as a model for his reform. For promotion, you must make a big article on this basis, and strive for yourself.

　　 So don't ask for a few factory leaders. If possible, he wants to move the central leadership over and make the sixth factory under his control a genius.

Others don’t know Shen Jianwei’s ambitious thoughts, but the director of the factory has spoken, so it is natural to implement it seriously, so the No. 9 building of the main plant soon received the successful improvement of the rivet mold of the sixth branch, and the J-6 heat-resistant aluminum alloy rivet was scrapped. The message rate is controlled at 0.5%.

　　 As the center of a large factory with more than 10,000 people, there are countless major issues to be dealt with every day. Technical improvements like this kind of sensational branch will not shock Building 9 like an earthquake, but some people are still surprised.

　　 For example, Qiao Chenyu, the director of the Crafts Department, did not expect to use the Sixth Factory's own ability to improve the rivet mold.

　　 Others don't know, but he, the technical core of the factory, knows how serious the loss of technical staff in the sixth branch in the past two years is. His technical department alone accepted the fifth or sixth voluntarily transferred technicians from the sixth branch.

　　Under such circumstances, it is a miracle that the sixth branch can independently complete the technological improvement.

The chief engineer He Ming also thought it was a miracle. Originally, he planned to finish the two key research projects in the factory, and then went back to help the sixth branch factory to solve the technical problem of the rivet mold, but he didn't expect six points. The factory relies on its own ability to get things done.

This made He Ming both happy and gratified. He felt that Shen Jianwei was not as bad as the rumors. He still had two brushes. In such a difficult environment, he used his own abilities to improve the rivet mold technology. Doing well is better than the vast majority of cadres in the factory who open their mouths to reform and keep their mouths shut.

　　 So when He Ming received the invitation from the sixth branch, he did not even refuse, so he immediately agreed and took Qiao Chenyu to the sixth branch after lunch.

　　 When they entered the workshop, Shen Jianwei was pointing to a few cold heading equipment in operation to introduce the improvement of the rivet mold to an Air Force representative in the factory.

　　 If He Ming and Qiao Chenyu are surprised, then the military representatives are truly delighted. The rivet scrap rate of Yonghong Factory is high. It is not only the factory itself that is under pressure, but also their military representatives stationed in the factory.

　　 The above is a deliberate desire to change the manufacturer, but the military production body for more than 20 years has created a great inertia. It does not mean that it can be replaced at all, so the garrison representative is required to strictly control the quality.

The representatives of the army stationed in the factory had no choice but to use the most primitive and stupid tricks to organize the inspection of one rivet one rivet, so the quality of the rivets delivered to the army was passed, but the Yonghong factory was a chicken feather because it exceeded the standard. The high scrap rate, huge monitoring team and long inspection time all push the cost to an unprecedented height.

Of course, the military will not bear it. It can only be borne by the Yonghong factory. Because of this, the sixth branch of the Yonghong factory has suffered very serious losses during this period. This means that the Yonghong factory has a big business and can afford it. The factory doesn't even have underwear left.

　　 But even so, there are still a lot of criticisms against the military representatives in the factory, which makes the military-local relationship not very harmonious.

Now that it’s good, the sixth branch has made new rivet molds through technological improvements, which not only greatly reduces the rejection rate, but also greatly reduces the manufacturing cost due to the super long life. Seeing that they don’t need to urge the quality of iron, the military The local relations have returned to harmony, and the representatives of the army stationed in the factory are happy from the heart.

　　 praised the self-reliance and independence of the Sixth Branch very much.

　　 At this time, He Ming and Qiao Chenyu walked over, and the representative of the air force stationed in the factory even praised the sixth factory in front of Mr. He. UU reading www. uukanshu.com also implicitly suggested that the factory can praise the sixth factory.

He Ming was also very pleased to get the approval from the army. Accompanied by Shen Jianwei, he watched the production process for a while and got a brief understanding of the improvement. He Ming asked with interest: "Is the improved technology originally there? show me."

　　 "Yes, here, here!" Shen Jianwei did not expect the Federation of Trade Unions to come in person, and some people suddenly went crazy under the excitement.

He only felt that the improvement of the rivet mold was a remarkable achievement, and he did not go into the details of the reason at all, so he invited the leaders to "guide the work" and listen to the chief engineer to improve the original process. How could he not be satisfied? , So he quickly turned back to look at Peng Chuan: "Xiao Peng, how about the improved process you made? Bring it to the chief engineer and see if there is room for further improvement."

Peng Chuan's face was a bit bitter. He never thought that Zhuang Jianye's perfunctory improvement process was really successful. Originally, he wanted to wait for the test to be completely over and fully understand the technical performance of the improved rivet mold, looking for an opportunity. Talk to Director Shen about Xia Zhuang Jianye.

I couldn’t wait for more than a moment for Director Shen, so he attracted a large group of big guys to watch. Peng Chuan is clever, but he has never seen such a big battle. For a while, he didn’t know what to do, so he wanted to take a look. In the limelight, I didn't expect the chief engineer to come over and ask for original crafts.

　　 Peng Chuan was a little nervous, wondering how the chief engineer asked him how to answer.

　　 "Xiao Peng, what are you doing in a daze? Get the originals quickly."

　　 Seeing Peng Chuan not moving for a long time, Shen Jianwei's face sank. An Ji Ling from Peng Chuan reacted quickly, and ignored other things. He quickly handed Zhuang Jianye's four-sentence improved technique from the document package to He Ming.

　　 He Ming received the hand and looked a little weird: "Old Shen, did you make this thing?"