Take Off My Aviation Era

, The fastest update to take off the latest chapter of my aviation era!

He Ming and other veteran cadres all tossed Zhuang Jianye naturally, but his current mentality is similar to that of Director Yu. He does not support or oppose it.

It would be best if they could rely on their relationship to open military orders. If not, Zhuang Jianye would not be surprised. After all, their TY-1 could not be on the stage in the eyes of mainstream aviation.

As for returning to the key military insurance list, Zhuang Jianye supported it with both hands, but that's it. The real factory management has an ambiguous attitude. What tricks can some old guys do no matter how powerful they are?

In the end, the ministries and the army do not depend on the attitude of the factory leadership. If Director Yu does not have the determination to do it, it will be useless for anyone to do it. The people above are not fools. Why should there be so many factories in the country? Hongchang is the son above?

So, Zhuang Jianye’s attitude towards these veteran cadres like He Ming is, if you support them, you should support them, you should shout slogans, and if you want to sponsor, you should give them generously, and then turn your head around. What should you do? Hungry.

Because of this, after Zhuang Jianye provided a TY-1 as a sample, he was busy expanding the aircraft production workshop of the 23rd branch.

This is the most difficult problem in the factory today.

Fortunately, the two electric fan factories were cleaned up very smoothly in Huancheng City. There was no obstacle to the management of the 23rd branch, and the electric fan business was completely transferred to the other three home appliance fan manufacturers.

So the 23rd branch began to renovate the original electric fan production workshop on a large scale, increase equipment, stock up raw materials, and refine the production process.

One thing, one thing, that's all big things, if Zhuang Jianye still thought about him, he would be a god.

"We got six sets of equipment from the ninth branch, and the second branch is in talks. Director Xue felt that the price was a bit low and didn't agree."

In the afternoon, the installation of the equipment obtained from Yonghong Factory began. After a busy morning, Zhuang Jianye got up from the sofa in the office and went to the workshop. Wang Heping, who was commanding and dispatching, immediately greeted him. Report the situation.

Due to the expansion of the UAV production workshop, the current 23rd branch has suspended production of the refrigeration component production workshop. The purpose is to reprogram the machines in the workshop equipped with sequence controllers and simple CNC equipment so that these machines can It is suitable for the processing and production of various parts of TY-1 UAV.

Yes, the UAV production workshop of the 23rd branch is the original refrigeration equipment production workshop. The reason for this is very simple, because the equipment in this workshop has been fully automated, and some of the equipment has realized simple numerical control. Special equipment for aviation manufacturing, such as friction welding machines and impeller shot peening machines, are ideal places for UAV production.

The only trouble is that the programming and debugging of sequence controller and simple CNC is a bit complicated. It needs to be reprogrammed along the production process and adjustment. Unlike real CNC machine tools, the program can be flexibly changed at any time according to the changes of components. Need extra time for additional programming.

If it is placed in another factory, it would take ten days and a half to stop, and then spend a lot of money to hire professional programming technicians to do it, but the 23 branch factory does not need to be so troublesome. When Lin Guanghua developed TY-1, he began to formulate process production plans and programming plans in accordance with the requirements of Zhuang Jianye and the equipment in the refrigeration component production workshop.

After several months of meticulous research and experimentation, Peng Chuan did not say that he made the plan extremely mature, but it is definitely the most suitable for the current situation of the 23rd branch. More importantly, it is very cost-effective in terms of time. It only takes three days. The original refrigeration component workshop has completely turned into an aviation manufacturing workshop capable of producing drones.

The team of workers does not need to be replaced. The original batch of workers who produced refrigeration components, slightly adapted to the new process, are fully qualified for the production of drones.

As for the original refrigeration component business, it was transferred to the original electric fan production workshop. The equipment was purchased from other branches of the Yonghong factory, and then the apprentices trained in the past two years were matched with the high-priced teachers hired by the Yonghong factory to adapt. Production, while continuing to expand production line automation and numerical control transformation.

I believe that when the inventory of refrigeration equipment stocked by the 23rd branch is exhausted, the new refrigeration component production workshop should be able to barely meet market demand even if it cannot reach the previous production capacity.

While thinking about planning in his heart, Zhuang Jianye nodded his head here: "Director Xue is indeed difficult to handle. He is a veteran of the Yonghong factory, and ordinary people really can’t help it. Leave this to me. I will talk to My old man said, his old subordinates, let my old man deal with..."

"Old Village, Old Village~~"

Zhuang Jianye is still talking about this, but Peng Chuan on the other side ran over with a pile of drawings.

Then he was very rude and began to complain: "The impeller shot peening machine is going to be used so soon? I said Lao Zhuang, can't you understand our difficulties?

You want accuracy, we control the accuracy to 26 channels. You want the power of the impeller to be larger. We worked hard to repeatedly modify the shape of the impeller, and finally reached the requirement. You said you want CNC, OK, exhausting. We also do work, but you can't use it for production now? If something is not stable yet, just take it, and if something goes wrong, it's whoever..."

"Well...how much...how much money is needed?" Zhuang Jianye quickly stopped Peng Chuan's complaint, wiped the saliva from his face, and said straightforwardly. There is no way, this guy just complains. Good thing, there is no other way unless you use money to stop.

"Give me one hundred thousand more. I will give you the semi-finished products I have saved. New ones will have to wait a while." Peng Chuan pushed the glasses on the bridge of his nose. .

Zhuang Jianye's face turned green right away. A CNC impeller shot peening machine he smashed in more than 200,000 yuan, and 100,000 yuan. NM is now in 1984, and more than 300,000 yuan can buy the same weight of gold. Up.

When Peng Chuan saw Zhuang Jianye's face, his gentle face immediately became like Huang Shiren's: "Don't bargain, you can't lose one point. I also told you that this 100,000 won't necessarily be possible.

Using computer technology to control the impeller parts to accurately complete the complex shape processing of aviation parts, do you think it is so easy? A floppy disk costs hundreds of dollars. In order to find the best solution, we need to use seven or eight at a time.

This is still a drone. If you change to another model, you have to push it to redo..."

"Okay, okay, you are uncle, one hundred thousand, I will give you, tomorrow you will go to the financial statement."

Seeing that Peng Chuan was about to complain again, and Zhuang Jianye started to have a headache again. If the CNC impeller shot peening machine worked well, it would not become a forbidden by big aviation groups such as Boeing and McDonnell Douglas. We have to go further, this step is necessary, so the investment is indispensable, 100,000 to 100,000, yes.