Take Off My Aviation Era

　　 "Let's go!"

　　 Just after Zhuang Jianye’s voice, before Wei could express his opinion, the head of the headquarters nodded first and then walked towards the Optoelectronics Research Center deep in the factory.

Lao Wei immediately followed, only Lao Mou looked at the "sniper" pilot helmet in his hand, and at the same time looked at the rather modern Zhi-12 helicopter cockpit, his face was depressed, he was obviously experiencing the "sniper" helmet. Yes, how come you have turned into a big guy to visit the equipment?

　　Thinking about it as if discussing the weight of the helmet is his own start, Lao Mou can't wait to give himself two mouths. Isn't the experience of stability not good? What a fool!

But Lao Mou also thought about this. Seeing that the head of the headquarters disappeared from the back, Lao Mou could only grit his teeth, and reluctantly stuffed the "sniper" helmet in his hand to the pilot, leaving a sentence: "Waiting for a chance to come over and see how good it is."

　　 then strode forward, chasing the head of the headquarters and the others.

　　 Compared with Lao Mou's perseverance, Lao Wei can't wait, knowing that it is the core manufacturing equipment that has the opportunity to stabilize the aerospace hegemony.

Why can Americans fly all kinds of fiber-based composite materials and make their own aircraft and spacecraft kill one generation and move forward one generation, making Europe, Russia and other countries only look at the United States? The back figure sighed, feeling his body hollowed out.

It’s not that the Americans have automatic silk laying machines, and the utilization rate of fiber-based composite materials can be raised. Not to mention others, the composite materials of the next-generation wide-body trunk airliner announced by Boeing account for as high as 40%. It is expected in the 21st century. Put into operation within the first ten years.

　　 Seeing all countries in the world is amazed, envy, and at the same time a deep sense of powerlessness.

People in the United States use 40% of composite materials in civil airliners, and most countries in the world are still arguing whether to use 10% or 8% of composite materials in fighter jets. The gap between the United States and other countries in the world is so big. , Otherwise, how could there be the title of hegemony.

　　 As a result of being monopolized by the Americans and endowing the key equipment with hegemonic connotation, Ascendas Group has actually made a breakthrough, which makes Lao Wei who is engaged in such research calm.

　　 That is, the head of the headquarters took the lead and sat in front of him. Old Wei couldn't help it. Otherwise, if he changed the individual, he would rush over in three steps and two steps, pulling the opponent away, and rushing into the research center hurriedly.

But this is the case. Lao Wei continues to spread the common sense of automatic silk laying machines behind the head of the headquarters, repeatedly saying how important this thing is to the development of domestic aerospace. The overall meaning is obvious. You should always hurry up. If it is slow, what should I do if the automatic wire laying machine runs away!

Facts have proved that the automatic silk laying machine of Ascendas Group is not a little goblin with long legs. It just stops quietly in the helmet process preparation room on the third floor of the Optoelectronics Research Center as a key production equipment. For the Optoelectronics Research Center to further research and improve the "sniper" pilot helmet integrated display system to provide lightweight composite helmet production and customized rapid processing.

　　 Therefore, the entire equipment is not big, with a total length of only 3 meters and a height of 2.7 meters. It consists of only three parts, a mechanical arm with 6 degrees of freedom, a mold holder and a console.

　　 From the outside, there is nothing to show off. It is nothing more than a robotic arm. It is neither as shocking as producing a large passenger aircraft with a length of more than ten meters, nor as cool as a sensitive component of a high-end fighter.

　　 just stayed there often, as if it had nothing to do with the expected aerospace hegemony.

　　 "This is the NB-2500V automatic wire laying machine delivered by our Ascendas Special Equipment Co., Ltd. to the Optoelectronics Research Center..."

Just when the head of the headquarters, Lao Wei and other military leaders looked at the equipment in front of them, frowned and felt that the so-called aerospace hegemony seemed to be a little bigger than the imagined tallness, Zhuang Jianye quickly came to NB-2500V Before, I started to introduce everything in detail.

　　Which threading head, the number of tows, how much labor is saved, and how much waste is reduced. All in all, Zhuang Jianye is chaotic with various data.

Hearing that the head of the headquarters and the others were dizzy, watching Zhuang Jianye didn’t mean to stop, the brain Ren’er, who had been tortured by so many unintelligible numbers, was just about to stop talking about Zhuang Jianye’s long talk. As soon as I reached my lips, I heard Zhuang Jianye's instructions to the operator of the equipment: "Turn on the equipment and show you the working conditions of the NB-2500V."

"Ok!"

　　 The operator nodded and was about to start the equipment, but before pressing the switch, the operator raised his head, and asked a little embarrassedly: "Mr. Zhuang, which product do we produce?"

　　 "Just do the simplest one, 0516B workpiece!" Zhuang Jianye blurted out without thinking.

"Okay, no problem!" The operator pressed the switch without hesitation, and immediately entered the 0516B workpiece processing instruction on the console. After pressing the confirm button, the mold holder started first, and the grinding tool rack was next to it. An S-shaped abrasive tool is found on the upper part. After the fixing is completed, the self-inspection generally rotates twice up and down, and then stays still.

At the same time, the robotic arm came out, walked slowly on the surface of the mold, and then quickly moved to the middle. The top of the robotic arm had a complicated wire laying head close to the mold, and the next 8 bundles, 6.4 mm wide fiber bundles, looked like A 75mm wide ribbon is sprayed from the silk laying head like a spring silkworm, combined with the epoxy resin that is infiltrated at the same time, and evenly attached to the abrasive tool.

When walking to the S-shaped complex curved surface, the originally fixed mold bracket is slowly offset, forming a comfortable feeding angle with the moving wire laying head. The T800 carbon fiber yarn is like silky smooth, from the complex S The curved surface is stable and uniformly skipped.

　　 In this way, under the cooperation of the robot arm and the bracket at various angles~www.readwn.com~ The silk laying head is like a painter, and like a weaver. It moves forward, sometimes backward, sometimes up, and sometimes deflects sideways on the mold.

　　 seems chaotic, but in fact the entire 0516B workpiece gradually reveals its true content in this chaos.

No matter what the other people are, looking at the dark, sticky things on it, there is a layer of goose bumps on their bodies, let alone see what it is, even if there are no goose bumps, these people don’t understand S What is the type 0516B workpiece?

　　 Because they really can’t think of any aircraft and spacecraft that would use such an alternative S-shaped tube.

　　 However, other people are not clear. The moment Lao Wei, who specializes in aerospace application research, selects the mold at the NB-2500V, his eyes straightened as if he saw a beautiful first love girlfriend.

　　 When the first layer of T800 carbon fiber is laid and ready for the second layer of silk, Lao Wei's old face and the old goddess become flushed for the first time like a racing car.

When the NB-2500V was ready to lay the third layer, it seemed that Lao Wei, who was in the dead of spring, could not bear it anymore. He pointed to the 0516B workpiece being processed and exclaimed in excitement: "Everyone, the American B2 inlet is made like this. Yes, the air intake of their stealth bomber is made like this!"

　　Https://

　　 Only one second to remember the address of this site:. Mobile version reading URL: