Start with a blacksmith shop

Looking at the two notebooks, one large and one small, in his hand, his eyes were fixed on them and he became a little confused.

He was indifferent to this before, but as his thoughts gradually matured, he became very aware of this issue.

The reason is not for anything else, just because they will be there if something happens in Kyushu.

And when he was looking at it, the dean next to him said again: "Okay, don't read it, I have already sent it to you and I can take it back to you. You can appreciate these slowly when you go back.

Also, have you heard about the award you received before? This is the highest honor for scientific and technological workers in Kyushu.

So far, a total of 44 scientists across Kyushu have received this honor. You are one of them, and you are proud of yourself.

In fact, given the results you have achieved, you deserve this award.

Okay, watch the award ceremony later carefully. Oh, by the way, I forgot to tell you. After the ceremony is over, I will take you to the award office to collect your medal and the corresponding bonus! "

After listening to the dean's words, he felt a sense of pride. You must know that this is the highest honor for scientific workers in the entire Kyushu.

Who has won this award? I won’t list the winners one by one. Anyway, the first winner is Mr. Yuan.

The honor he has achieved now is comparable to that of the old man.

As for the bonus mentioned by the dean, he does not value this because he is not short of money.

After all, he is also the chairman of Jiuzhou Divine Beast. In terms of net worth, he may not be ranked high in Jiuzhou, but he can still be ranked high in the province.

The award ceremony is still going on, and the grand honcho is awarding certificates to the winners one by one on the stage.

The award ceremony went very quickly, and everyone's certificates were handed out immediately, leaving only the final group photo session.

Li Zhenhua, as the only winner of Kyushu's highest technology award every year, is fortunate to stand next to the big leader.

After taking a huge horizontal photo, the award ceremony was completely over.

After the leader left, the dean took him to the award office to collect the remaining things that belonged to him.

After the staff learned who he was, they received him warmly and handed him his medal and a check for an 8 million yuan bonus in person.

When he walked out of the synagogue, he held a large notebook in his hand and a small notebook in his pocket.

As for the medal, he held it in his hand, and the check was tucked into the big notebook.

Anyway, his hands were not empty, he returned home with a full load, and he had also thought about it, he would not cash the check. Anyway, he was not short of the eight million, and he would have the check framed when he returned.

Along with the honorary certificates and medals he received, they were all placed in the company's honor room. When the photos were developed, they were found a place to hang in the company along with the photos.

When he received the highest science and technology award, his trip to Peking was successfully concluded, and he still had a lot of knowledge in his mind, which was priceless to him.

After returning to his residence, he explained a few words to Ning Wei and others and asked them to pack their things, and they were ready to go back.

After he finished explaining to a few people, he went to the dean's office to say goodbye.

After finishing all the matters in Peiping, Li Zhenhua embarked on the return journey. This time he did not choose to take a plane, but chose to take a car and run back on the highway with Ning Wei and the other six.

After leaving the capital and getting on the expressway, we were only about 400 kilometers apart. The distance was not too far. If we kept a constant speed of 120 kilometers, we could get home in about four or five hours.

After he got in the car, he closed his eyes and immersed himself in the virtual laboratory in his mind, planning the powered exoskeleton he would make when he returned.

In the virtual laboratory, he arranged the surrounding environment to look like a library. In the entire space, whether he understood it or not, he embodied all the books he had come into contact with.

Now the collection of books here is almost as big as that of a medium-sized library.

And he was sitting at the table, with his plans for returning to the area densely written on the white paper in front of him.

Just as he was planning the development of a powered exoskeleton, his external senses were urging him to withdraw from the laboratory.

When he opened his eyes again and looked out the window, he realized that the car had stopped at some point and stopped on the highway.

And when he looked towards the front of the car, he realized that the traffic jam was extremely serious, but he didn't know what was happening at his position.

At this time, he could only wait in the car, waiting quietly for the road ahead to clear.

But after waiting for half an hour, the traffic ahead was still jammed, and they still didn't know what happened, which made him feel a little depressed.

If I had known this, I might as well have chosen to fly. Being stuck in traffic on the road is simply a waste of time.

After waiting for another ten minutes, the convoy in front was finally moving slowly. Looking at the slow-moving team, he felt better.

When his car moved forward slowly and finally passed the location that caused the traffic jam, it turned out that a car accident had occurred.

The road at the scene was covered with fine sand, and the truck blocking the road had been moved to the side. The truck that collided with the truck was a bus.

Just when he was wondering what happened, a news message popped up on his mobile phone. There was a car accident on the Beijing-Taiwan Expressway. It detailed what happened.

A total of three people died and six lost limbs. The most serious one was thrown out of the bus because he was not wearing a seat belt. The moment he was thrown out of the window.

His entire arm was worn away by the friction between the bus and the ground.

Seeing this, he couldn't help but feel that life was really too difficult, and life was also extremely fragile. If he was not careful, he would encounter natural and man-made disasters.

After he passed the scene of the car accident, the speed of the car immediately increased. Under the influence of the news just now, he firmly fixed himself in his seat with his seat belt.

The team returned to his company in the afternoon, but after the car accident, he never quit this emotion and was still immersed in it.

I returned home in a daze, washed up briefly, and then sat quietly on the sofa, thinking about what happened before.

He always felt like there was something he could do, especially after seeing the mutilated limbs recounted in car accidents.

He couldn't grasp the point after thinking about it, but when he closed his eyes on the sofa again and stopped thinking about it, the powered exoskeleton he had been studying recently appeared in his mind.

I saw him, who was still very decadent and sitting on the sofa with his eyes closed, suddenly stood up from the sofa, his eyes widened.

"Yes, my next step is to develop a powered exoskeleton armor. As long as this thing can be produced, I can develop a prosthetic limb based on it, or a high-tech prosthetic limb."

He finally figured out why he felt like he could do something. It turned out that the exoskeleton armor he was about to develop could be completely modified into a prosthetic limb.

Thinking about it this way, the more he thought about it, the more he thought something was wrong. Now the powered exoskeleton was no longer just a toy he wanted to make for himself.

He identified the greatest value of this project, which is to help disabled people regain their lost limb mobility. Of course, the most important target group is those who have lost their upper limbs.

The more I thought about it, the more I thought about it, but it didn't take long for me to come back to my senses and put these thoughts behind me.

‘Don’t think so much. For now, it’s better to think about how to make a powered exoskeleton. As for the research and development of prosthetics,

The technology for this promotion direction is the last research and development that needs to be carried out! ’

While he was still thinking about this, the door was pushed open, and he opened his eyes from the sofa and saw Li Yun standing at the door.

Seeing Li Yun come back, he stopped thinking about his plan and immediately stood up on the sofa and walked towards the beauty.

The two of them did not have dinner at home that night, and while they were waiting for Li Yun to change into clothes, they went to the county seat for dinner and watched a movie after the meal.

That night was another dark battle, and he handed in the homework he had accumulated for more than two months at once.

After Li Yun checked all his homework, the two hugged each other and fell asleep, but he did not choose to fall asleep directly.

He got into the virtual laboratory to start the research and development of a powered exoskeleton, and his body entered a deep sleep. It can be said that he was sleeping and working at the same time.

In the same library-style space that had materialized, he sat at the table and designed the powered exoskeleton from scratch.

Powered exoskeletons, to put it bluntly, are still human body wearable devices. They are of the same type as smart watches and VR eyes. However, it is not so appropriate to say that they are the same kind of thing.

This kind of equipment achieves several goals, including increasing strength, increasing speed, improving jumping ability, and giving people a source of help.

From previous understanding, it is not that no one is researching this kind of powered exoskeleton. Many research institutions around the world are conducting research in this direction.

Their main application direction for this equipment is in warfare. Letting soldiers wear this equipment can enable them to gain more powerful individual combat capabilities, so this equipment is also called individual exoskeletons. .

But his first purpose was not in the military direction. His original intention at the beginning was just to gain greater power in assembling large equipment.

As for the application in the military direction, it can be improved after it is successfully developed. This does not mean that it cannot be used in the military at all.

The first thing to do is the mechanical part design, and he is still very good at this aspect.

In terms of mechanics, the first thing he has to solve is the transmission system, which direction should be chosen for development.

The two most reliable solutions are one using a hydraulic system and the other using a pneumatic system.

If you don’t understand it so well, the principle is actually the same as that of an excavator, except that the mechanical arm of the excavator is reduced and improved into a mechanical arm that can be worn by the human body.

The power source on the excavator has been changed from a diesel engine to small electric motors distributed throughout the exoskeleton system.

He has never made up his mind about the two directions of the power output system. Hydraulic pressure and pneumatic pressure each have their own advantages.

Advantages of the hydraulic system: smooth transmission, high driving rigidity, high response speed, and the ability to achieve infinitely variable transmission;

However, the disadvantages are also obvious to all, that is, it is easy to cause oil leakage, affecting its performance, it is sensitive to pollution, the purity of the hydraulic oil is required to be high, and the temperature also has a great impact on the hydraulic system.

Compared with the hydraulic system, the pneumatic system is faster in action, the cost of the control components is also low, and the structure is simple.

The disadvantage is that the movement is extremely unstable, the drive rigidity is insufficient, and the precision control is not as good as the hydraulic system.

Listing the advantages and disadvantages of the two systems one by one, and comparing them with each other, he still chose the hydraulic system as the main transmission system.

The main reason is the high drive rigidity, which also means that it is more reliable than the pneumatic system.

As for the shortcomings of the hydraulic system, he can just solve them one by one. Otherwise, it will not be a challenge at all and there will not be much motivation to do it.

After determining the hydraulic system, the rest is easy to say. At least there is a research and development direction.

As the research and development of powered exoskeletons progressed, he also developed the power sources needed for them.

The power source is a small electric motor. As for the small electric motor, when he was finishing the helicopter model before, he built a 2.6KW electric motor with 3.5 horsepower.

However, this kind of motor is still a bit too big to be used on a powered exoskeleton, so this kind of motor can only be used on main branches, and is not suitable for places that require small power.

Therefore, he also needs to develop a micro motor for the power exoskeleton, and not only the micro and small motors used everywhere, he also needs to design an electric motor as the main power source.

Then he started with power and started the research and development of powered exoskeletons.

As the main power source, there is only one requirement for it, that is, the power must be large enough and the horsepower must be strong enough.

Only in this way can the designed exoskeleton armor allow people to lift heavier objects, run faster and jump farther.

So he developed two electric machines that he had previously designed and used on the White Tiger 200.

On this basis, the main power source used by the exoskeleton must be slowly optimized.

When he started researching in this area, he felt more and more that the two months he spent in Peking were not in vain.

Because now when he looks at the two previously designed motors, he suddenly knows what areas of the motor body can be improved.

This is the result of his further studies in Peking. For the two previous electric motors, Li Zhenhua first optimized them.

But it is just an optimization. He does not want to apply it to the market now. As a qualified company owner, he must learn how to squeeze out toothpaste.

What's more, if you update the electric motor now, people who have already purchased the car in the market will definitely have objections.

The motor he optimized this time is considered the company's technical reserve and can be used anytime he wants to use it later.

PS: This chapter counts as the No. 1 update