Skynet Architect

This building transfer type terminator is very huge when looking at the block, it is more than five meters in length, and it is also very strong. It doesn't look like a robot, but a huge machine.

This is actually the same. Unlike ordinary robots, this is a construction machinery robot. His construction machinery classification shows this thing. It is absolutely very rude. He has a huge body and looks at it. It's like a giant monster. The thick body carries dozens of tons of weight. The hundreds of various construction equipment on the body are exposed at any time. There are more than a dozen robotic arms behind it. This is a module that is guaranteed to be disassembled. It can be properly and safely stored. There are also some very small spray holes on the robot arm above. These spray holes will spray high plastic plastic. These plastics will slowly cover the entire surface of the material under the action of the blower at the back. , Forming a simple protective film to ensure that the material will not be damaged by some very easy chronic damage.

After that, they were packed centrally, and by the time they landed, they were already stored in very modern crash-resistant boxes.

It is worth mentioning that this box is actually a product of a waste treatment plant. Those boxes that are not easy to decompose, or have low decomposition value but have good ductility, have been made into such boxes. They have already been available in the world's packaging market. A place.

The simplest reason is that there is actually a demand for express delivery in developed countries. They like to use express delivery to buy things, but the artificial price makes them unable to stop in the express delivery market, and their express delivery costs are still too expensive.

Another point is the problem of packaging. They like ours use a lot of express packaging. Another result is that plastic garbage is everywhere, packaging paper is everywhere, express packaging is endless, and handling in this environment is a problem.

This problem is still valued by citizens with better quality, and Si Fan better solves this problem. These wrapping papers are infinitely circular. They are only used as wrapping paper. After you receive the courier, you will pack it. Put it in the recycling box of the special Skynet Group, it will be collected and remade into packaging paper, and these packaging papers will be reused.

The conversion process is very environmentally friendly. In this regard, Si Fan can be said to be doing very well, and their technology will not be announced, but the nearby environmental assessment indicators fully meet the requirements, and it can even be said that there is no pollution.

Such things are naturally chosen.

And now this Terminator uses this technology, but the way he uses is relatively rough, directly using mechanical blow-seal, and then fast packing, the speed of packing items in his hands does not exceed one second, the centrifugal force brought by rotation is It seems to damage the item.

In Si Fan's opinion, these are farts, which can damage a fart. All they pack are buildings, that is to say, don't look at them are large pieces, they are actually cuts of buildings.

The large amount of testing equipment in front of the equipment is to ensure that the building is completely non-load-bearing. .

It also seems that most of the previous equipment cutting is not the load-bearing part of the building, and the real load-bearing part will be divided in a relatively large way to ensure that the original shape and performance are maintained during assembly.

The huge machine in front of Si Fan can guarantee these requirements when designing it, but the actual actual use effect, to be honest, Si Fan did not dare to pack tickets.

Because this involves a lot of knowledge use, Si Fan needs to find a lot of auxiliary materials, such as the original separation and cutting of the load-bearing wall completely restored to the previous environment.

This is a very difficult requirement. When cutting, it will inevitably lose the integrity of the wall and even reduce the basic materials. How does Sifan solve this requirement?

This seems to be difficult, but after receiving this request, Alex held a meeting, and then there was a plan for this big guy. When designing, he promised that as long as it was not a humanoid robot, it was actually It's very easy to make. Their size can be very huge and practical, but they can do many things without a two-legged simulation robot. They can't perform some very complicated tasks.

Therefore, Si Fan's request was not valued by them, but because Si Fan was the owner and it was guaranteed that the company's technology would be used on this machine, they confessed to making this for Si Fan, which basically looked a bit silly Person.

Looking at that big head, his body is full of robotic arms, and his body is like a cylinder being buckled upside down on the platform below. It is really not beautiful. As for the lower body, it is even more ordinary. It is a huge oval body, which is full of various materials. They are packed in hundreds of small boxes. Www.readwn.com ~ waiting to be used at any time. The material is a relatively small box.

This design is quite reliable, and below is a lot of spider-like lower limbs.

Using such a full-footed design is basically lazy, leaving everything to the computer and the future black technology, and they just want to see how powerful the black technology's intelligent programs are.

So this full design is full of Alex's dissatisfaction with Si Fan.

Si Fan also knew that these guys were pit-like, so he conducted the tests himself.

However, his method of detection is different from others. He does not use those devices to detect. When other people focus on the controller that Sifan detects, he has contacted the system.

"System, evaluate the Terminator in front of you and check if it is enough to complete the task." Si Fan ordered to go out.

This is the most basic. The development of the terminator is of great significance to him, and the rewards behind it are the basis of the terminator. There is no reward for the development of a terminator.

Si Fan still has a hole in this area. Terminators of this type are relatively easy to manufacture, and they just need to be used now.

Of course, there is another important point, that is, the bionic terminator is too difficult to know, Si Fan very much wants new technology.

Just as he tested, the system responded immediately.

"Testing the current Terminator's power system is normal, the module attachment system is normal, the energy system is normal, the control system is normal, and the dynamic performance is normal ... The high-pressure vessel's leak tightness is normal." A series of inspections was a headache.

The final result also made Si Fan more happy.

Because he knew that he succeeded.

"All inspection items are normal and meet the most basic standards."