Skilled in managing a house

After the car shell is stamped and formed, the next step is cooling. After cooling, it is completed.

The car shell was sent to a crane to lift it, and then placed on a mobile truck. Workers pushed the mobile truck and sent it to Brother BOSS.

Brother BOSS couldn't wait any longer. Before the moving vehicle could be pushed over, he hurried forward to greet it. The other heads followed him to the mobile vehicle.

From a few meters away, they could clearly see the pressed car shell. But in the past, it could actually be pressed out by stamping, but it would break when it came to the cooling stage. After all, the quality of the steel is not up to standard and the factory equipment is not advanced enough, so it must be in vain.

Looking at the pressed car shell, Brother BOSS looked at it carefully. When he came to the edge, he discovered that the car shell was actually very complete, with no cracks at all.

"This...this..." For a moment, Brother BOSS was stunned. He walked around in circles and looked at the car shell. It was absolutely true, it was indeed perfect.

Not only Brother BOSS was stunned, but Brother BOSS's subordinates were also stunned now.

"There are no cracks!" "There are really no cracks!" "Not even a crack... what's going on..." "I failed every time before, but this time... why did I succeed all of a sudden..." "Could it be that This is really due to the timing..." "It's possible..."... These people don't know why, so they can only use good timing to convince themselves.

After all, many experiments before this ended in failure. It's a great day today. It was molded in one go and the effect is amazing.

Brother BOSS has put his hand on the car casing and stroked it carefully. The car casing is smooth and neat, without even a little dent. He touched the entire casing of the car, and the man then froze in place, dumbfounded, speechless during the day.

"Mr. Lu, what's wrong with you?" The workshop director couldn't help but ask when he saw Brother BOSS like this.

"It's amazing...it's really amazing..." Brother BOSS said in a daze.

"It's really a god. It can be stamped and formed in one go... It's really unimaginable..." the workshop director said quickly.

"I'm not just talking about this... If you check it carefully, you will definitely find something different..." Brother BOSS said still full of surprise.

Everyone didn't understand what it meant, so they all started to touch it.

Soon, the Director of the Quality Department exclaimed in shock: "The car shell is smooth and complete, and there is no need for sheet metal at all!"

After hearing this, the workshop director also discovered this, and said in the same astonishment: "That's right! It's smooth and complete, and there is no need to use sheet metal to level it... This, this... This is incredible... what happened……"

This time, their performance was even more surprising than before when they saw the car shell intact.

The reason why this is so is very simple, that is, domestic stamping technology is not particularly high-end yet. Especially Dahe Automobile Factory, not to mention, the technology is backward in the country. Compared with FAW, GAC, and Qihu Automobile, it is not on the same level at all.

Although the car shells of the previous batch of cars that rolled off the production line could be stamped and formed, they would undergo slight deformation after cooling. For example, some places will be sunken and some places will be raised.

But this is nothing. Many domestic automobile factories are like this, otherwise they would not have sheet metal workshops. There are specialized sheet metal workers who do this, flattening the car shells that have deformed due to cooling.

Of course, this belongs to some backward automobile factories in China. If it is a higher-end automobile factory that uses the best steel plates and has excellent stamping technology, then this problem will never occur.

The stamping and molding this time has simply reached international standards, which is surprising.

The people present are all knowledgeable, but no one can figure out why this is happening. To them, it was nothing short of a miracle.

"Mr. Lu... this time it was molded in one go... and there is no fault at all... What's going on... Is this good time so important... No way..." the production director stammered.

"I..." Brother BOSS didn't know why, but after a long time, he suddenly heard a "click". He looked towards the source of the sound and knew that stamping and injection molding were being carried out again. Brother BOSS said: "Let's see how the quality of the next one is..."

"Yes, yes, let's look at the next one." "Let's wait and see how the next one works." "That's right!" "To be honest, I'm a little excited now. If nothing goes wrong, this It's simply a world-class standard."...Other people were also nodding, and there was a light of expectation in their eyes.

After a while, the injection molding is completed and the car shell begins to cool.

After the cooling process was completed, the car shell was pushed over by the moving vehicle again. Everyone just took a look and saw that this car shell was the same as the one just now. There were no cracks on it, not even a single fine line.

Touching and checking again, the car shell is still smooth, without any dents or bulges.

“It’s still like this!” “Perfect!” “It’s so perfect!” “I’ve been in the factory for so long and I’ve never seen such a perfect car shell!” “What’s going on? Could it be that this was the case before? I didn't choose the right time."... After everyone inspected the car shell, they all let out a sound of exclamation.

Especially Brother BOSS, his body is trembling.

You know, the design of this model cost him a lot of time. This was his original design, but he had no choice but to settle for the second best because the steel and technology were not good enough. Although the factory can also import steel at a high price, the cost will increase. For a small car factory, this is obviously impossible. Even if it could be produced, at what price it would be sold, how could the Chinese people buy it?

Now, it's great that the most ideal car model can be injection molded from the original materials. For BOSS brother, it is simply a shot in the arm.

He suddenly had a feeling that his dream would soon be realized.

But why can things that were impossible to do before suddenly be done now? He really couldn't figure out whether it was really the auspicious time that Zhang Yu mentioned.

Suddenly, he suddenly thought of what Zhang Yu once said, "You don't have to worry about this. When I'm ready, we will start the production again. In addition, the production will be the same as usual, and no one can It can be seen that I have provided guidance.”

Thinking of this, Brother BOSS murmured in his heart, "When it's ready... we can't let people see that it was the boss who gave the guidance... What did he prepare and what did he give guidance... It seems like he just came to visit, and then I just watched the stars at night, talked for an hour... and did nothing else..."

Everything is so complicated that BOSS really can't figure it out. Everyone was confused.