60s researcher

After Zhou Changming finished speaking, he continued: "Our CNC machine tool this time includes the processing program carrier, the main body of the machine tool, the servo drive device, as well as the CNC device and other auxiliary devices. The processing program part is in charge of Mr. Lou. Mr. Lu and I are responsible for the main body of the machine tool, Mr. Qi and Zhiyuan Zhai are responsible for the servo drive device, Mr. Lu Jian and Mr. Lan Mingda are responsible for the CNC device, and Mr. Ma is responsible for the other auxiliary devices. Members are..."

Zhou Changming announced the group list that had been arranged before, and then looked at the people below, "This is roughly the personnel arrangement. Is there any problem?"

He waited for a minute but no one stood up, as if he had any objections, he continued talking.

"Then let's talk about the situation of the project in general. The goal of this CNC machine tool project is to improve the machining accuracy of the machine tool so that it can perform multi-coordinate linkage and process more parts with responsible shapes. The main body of the machine tool project What the group has to do is..."

All the people in the audience listened quietly, and concentrated on recording on paper, especially the part about their own group project tasks, which they remembered most seriously.

"Is there anything else you don't understand?"

Everyone shook their heads, he had already made it very clear.

Zhou Changming looked at his watch, put away the materials on the table, and said: "Okay, this is the end of the meeting. The leaders of each project team will bring their team members back to the experiment where their project team is located. The specific work arrangement is in the charge of the team leader, and the laboratory of the machine tool main project team is..."

This laboratory is very large, and the laboratories for the main machine tool and other auxiliary devices are arranged in the two largest laboratories on the first floor. There are not only laboratories, but also several offices and small conference rooms, which are quite well equipped.The laboratory of Lu Jian's CNC device team is on the third floor, and the processing program project team and servo device project team are on the second floor.

The meeting didn't last long. After all, the project was huge. What Zhou Changming meant was to let them arrange the discussion in private after the groupings were completed, which would also save time.

After Zhou Changming finished speaking, he asked everyone to disband.

Lu Jian and Lan Mingda took their team to the laboratory of the CNC device project team. They didn't care about the specific devices in the laboratory, so they went directly into the small conference room inside the laboratory.There are not many people in their project team, there are about ten people now, but Xu Yan, Zhao Lei and Jian Mingyuan are all in it, as for the others who followed Lu Jian, they are all assigned to other project teams.

As soon as he entered the meeting room, Lu Jian asked everyone to sit down. The project team said that Lu Jian and Lan Mingda were in charge together, but the actual person in charge was still Lu Jian, and Lan Mingda was his deputy.Lu Jian sat directly at the main seat, Lan Mingda sat on his left, and Xu Yan and the others sat on the right.

Lu Jian looked at the people present, most of them were relatively young. After all, the development history of electronic components is still relatively short, especially transistors, so this is also normal. "Hello comrades, we will work together for a long time starting today. I don't have any special requirements for you, as long as you complete the task at hand carefully." Lu Jian didn't mention the discipline aspect, They are all old researchers, so there is no need for him to say more.

After seeing them nodding, they got to the point, "Our project team is the CNC device project team, which can be said to be the core part of the entire CNC machine tool. The plan you received before said that transistors are used, but I want to tell you It is this kind of scheme that has been abandoned, and the integrated circuit we are going to apply now..."

Lu Jian briefly talked about the new plan, but he didn't directly mention the microprocessor plan, after all, there are still uncertainties.However, everyone in the conference room was already in a state of agitation, their eyes were shining brightly, and the questions in their mouths were almost unbearable.

Finally, after Lu Jian finished speaking, he stopped and looked at everyone, "This is the current design, is there any problem?"

"Lu Gong, has our country really obtained integrated circuit technology?"

"What method did they use to achieve such a large amount?"

"Lu Gong, do we have enough time to change the plan?"

"Is the information on integrated technology available now?"

"..."

As soon as Lu Jian's words came out, questions swarmed in, and the conference room with more than a dozen people was extremely lively.

Seeing that Lu was frowning, he couldn't hear what they were asking. Lan Mingda quickly patted the table with his hands. After a "bang", the meeting room fell silent. Those people saw the two people above. The expression of the person sat down resentfully.

"Is it okay to ask one by one? They are all intellectuals, what does this look like?" Lan Mingda said a few words with a straight face, and seeing that they were silent, he continued: "One comes, starting with you. "

He pointed at a person at random, and the person pushed his eyes and stood up quickly.

"Lu Gong, when can we see the information on integrated circuit technology?"

This should be a concern of everyone present, Lu Jian thought for a while, and said to them: "The information will be delivered within half a month."

"Then what are we going to do now for Lu Gong?" According to Lu Jian, their entire design needs to be revised, and they must not be able to make CNC devices for the time being.

"Our current task is to make the point control system of the machine tool, as well as the interface circuit..." Although they said that they are responsible for the CNC device, there are still many supporting facilities to be completed.

Their meeting didn't take long, and it was much shorter compared to other project teams, and the tasks were quickly assigned. The tasks at this stage were relatively simple, so Lu Jian directly let Lan Mingda let them go.

After the meeting was over, Lu Jian went to the office he had arranged for him. He didn't expect that there was a telephone here, but it happened that he wanted to call Minister Qu just now.

He sat down on a chair with a glass of water, took a sip of water, then put the glass down, and made a call. I have to say that Lu Jian was lucky, Minister Qu was in the office, and the call was quickly transferred.

After two beeps, the phone was connected, "Hello, Qu Qiutong, Ministry of Commerce, who is it?" The voice was a little distorted, without any emotion.

"Minister Qu, it's me, see Lu."

"Oh, it's Lu Gong, what's the matter? I remember that your CNC machine tool project started today, right?" He heard Minister Qu's voice relaxed, and it sounded more cordial than before.

"Yes, Minister Qu. I'm in the machinery factory in Hu'an City now. I want to ask about the integration of technical materials. When can we get the materials?"

"Here, wait a minute, I'll ask about the situation, and I'll be here in a few minutes."

"Mr. Qu, I..." Lu Jian could clearly hear the sound of the phone on the other side being placed on the table, followed by footsteps and the sound of the door being closed.

Lu Jian had no choice but to wait with the microphone in hand. While waiting, he became more and more anxious, and unconsciously stared at the watch in his hand.

After waiting for about 3 minutes, a voice finally came, the door was opened, the microphone was picked up, and then Minister Qu's voice said, "Gong Lu, I have already asked, the materials will be handed over in S City tomorrow, about three It will be sent to you in a few days, and you will be responsible for confirming the authenticity of the information, you must confirm it carefully, as it will affect the subsequent payment."

Minister Qu spoke very seriously, but the others were also frightened, and always received cut-down versions of things.I didn't expect to get the information so soon, Lu Jian was very excited, but if he suppressed his mood and said seriously: "Understood, Minister Qu, I promise to complete the task."

Minister Qu over there laughed, "You and I must be at ease, but you shouldn't be asking me for more than this problem, right?"

Lu Jian smiled embarrassedly, he really had other things to do, "Hey."

"You kid, tell me quickly!"

"It's like this. Didn't I tell you about integrated circuits before? We now want to further research and develop integrated circuit technology, directly produce microprocessors, and apply them to the numerical control devices of CNC machine tools, but in terms of time some problems?"

"What? You want me to help you go to the Mechanical Engineering Department to convince the Minister of the South?"

Lu Jian could almost guess Minister Qu's expression on the opposite side, and said a little embarrassedly: "The Minister of the South has initially agreed with our idea, and the time has been given for four more months, but the Minister of the South still has to convince other people. "

"Then you are asking me to help the head of the South? Lu Gong, are you getting better at understanding people and making good use of them?" Although he said this, he was smiling. Lu Jianneng came to him to solve the problem. The problem, isn't it just a sign of trusting him.This is not bad, as long as it can produce results, he is also very happy to make trouble for him.

Lu Jian really asked Minister Qu for help when he said these words. After all, this project is considered to be a joint cooperation between the two, and Minister Qu has been in this position for a long time after all, so he should be more convincing than the new Minister of the South.The most important thing is that the Bureau of Commerce originally wanted to organize manpower to study integrated circuit technology, which can be regarded as a combination of two.

"Isn't this just the integrated circuit project that we are going to do here? Can you get some money and manpower?"

"Hmph, we still have to wait. I have already prepared the funds and manpower, but I am afraid that you will be too busy."

"Hehe, I'm busy now. The part I'm in charge of now is the numerical control device, which happens to be the research of this." Lu Jian smiled, but now the Bureau of Commerce is considered to be rich and powerful, so I really have the confidence to say this.

"Okay, I'll help with this matter. I'll call the Minister of the South later. As long as the funds and manpower are in place, there will definitely be agreement." He is very confident, knowing that most of the funds for this CNC machine tool are originally they provide.