60s researcher

It didn't take long for the two of them to arrive at the place where the last recruitment exam was retested, that is, the technical department. They went up to the second floor and walked to the first office on the left.Section Chief Li regained his composure, knocked on the door, and a voice came in from inside.Lu Jian suddenly remembered the two old researchers he had seen in the previous retest.Sure enough, after the two walked in, he saw a person who was sitting next to the factory manager that day.

"Zhou Gong, this is Lu Jian. I brought him here." In front of Zhou Gong, Section Chief Li changed into a humble and polite appearance, completely gone from his previous appearance.

"Hi Zhou Gong, I'm Lu Jian." Lu Jian smiled at him, looking very cute.

"Okay, it's okay for Section Chief Li to bring people here, you can go back!" Zhou Gong waved him out as if chasing flies.

"That's all right, I won't bother you guys. Zhou Gong is busy with you." After he finished speaking, he nodded and quickly backed out, closing the door behind him.

"Lu Jian, come and sit." Seeing the idlers waiting to leave, Zhou Gong immediately smiled and spoke kindly, and asked Lu Jian to sit on the chair in front of his desk.This office is also quite simple, with an oversized desk full of drawings and a few pencils, and a tea mug.Two chairs, and against the wall stood a large bookcase full of books.

Lu Jian sat on the chair with his back straight, as if he was still studying in school.Seeing this, Zhou Gong smiled.

"I'll call you Xiao Lu, don't be so nervous, anyway, you are Professor Xie Da's student, and you must be capable." Zhou Gong picked up the water glass to drink water, but the glass was poured to the bottom, and no water came out.With some embarrassment, he picked up the water bottle at the foot of the table and poured a glass of water.

"Zhou Gong, Professor Xie has helped me a lot, but I can't be considered a student of Professor Xie, I can only be regarded as an auditor." Lu Jian pretended not to see his embarrassment, and still sat upright, looking at him Do not squint.

"Don't say that, since you have joined us, everyone can be your teacher, and you can just learn more in the future." Zhou Gonghun didn't care.

"Now it's like this. Here we have a research group on CNC machine tools. The team leader is me. You have seen the deputy team leader before. It is Lu Gong on the day of the retest. We plan to arrange you in this CNC machine tool. Team, do you have any objections?" After speaking, he kept staring at Lu Jian.

"Obey the arrangement." Lu Jian didn't say anything nonsense, he had planned to enter the numerical control machine group before and study the numerical control machine tools.Originally, he thought that he had just entered the technical department, that is, he was doing odd jobs in small projects, and he was still thinking about how to transfer to the CNC machine tool group, but it turned out that he had achieved his goal right after he came in, which can be regarded as a pleasant surprise .

"Okay, the rest of the team is on the first floor now, let's go there now." After all, it was the first day, Zhou Gong didn't say much, and led him down to the first floor to the second room on the left, the door was closed. Guan, there are about eight or nine people inside. In the middle of the room is a machine tool, with many lines connected to the side, extending to the table around the machine tool, on which there are many instruments.There was a large long table at the innermost place near the window, on which were stacked drawings, pencils, and notebooks. One of the older researchers was standing there talking fiercely, and the rest of them were sitting there scribbling.

"Lu Gong is in class again. His style is like that. He gets agitated easily when he is in class." Zhou Gong said to Lu Jian a little narrowly, and led him over without waiting for his answer. Just at this time, Lu Gong The lecture has come to an end.

After Lu Gong finished speaking, he happened to see the two of them coming over, and immediately became happy. "Little Lu, I'm Lao Lu, and we will be a family from now on. Do you know anything about CNC machine tools?" Lu Gong was also direct, and started asking questions as soon as we met.

Lu Jian glanced at Zhou Gong in embarrassment, but he pretended not to see it, staring out the window.Those who were still writing quickly also stopped, their eyes fixed on his face.

"At present, the machine tools used in our country are still the old-fashioned machine tools. The parts processed are single, and new products cannot be replaced in time to meet the production needs. However, the world's first CNC machine tool was developed abroad in 1952, and it was manufactured in 1963. The world's first CNC automatic line for processing multiple diesel engine workpieces, that is, FMS flexible manufacturing system, is to process different parts with computer distributed control. In my opinion, the research of CNC machine tools is inseparable from the use of computers. We need to build a A complete information control system can logically process control codes or symbols, compile them, and then process them automatically." Since he decided to change the status quo of Huaguo machine tools, he did not back down, even in front of the boss. Be outspoken.

Although Huaguo has broken off diplomatic relations with many countries, there were still many professors and scholars who came back from abroad, and there were some channels to receive information from abroad.Therefore, there is also a lot of information in China about the development of CNC machine tools abroad, but the domestic control has become stricter in the past two years, and many people have lost the channel to communicate with the outside world.

"Then where do you think we should start now?" Lu Gong asked with some surprise, he didn't expect him to have a deep understanding.

"A complete CNC machine tool should have three parts, processing, transmission and information system. My idea is to use multiple machining centers and multiple axis drilling machines to realize modular multi-process processing..."

Lu Jian talked eloquently, for a while his voice could only be heard in the whole room, now even Lu Gong and Zhou Gong sat on the chairs and began to write quickly, their eyes were full of light.

By the time Lu Jian finished speaking, his throat was already so thirsty that he coughed a few times.

"Zhao Lei, didn't you see that Teacher Lu wants to drink water? Hurry up and get a new cup and pour water for Teacher Lu." Lu Gong hurriedly patted the young man sitting next to him with a serious tone.She turned her head and smiled flatteringly at him.

"Xiao Lu, I still don't understand when you look at this..." He took the notebook in his hand and wrote down a lot of content.Lu saw that he had no choice but to take it over and explain it to him carefully. Zhou Gong was a little angry when he saw that he didn't get the first question, but seeing that the old man asked what he wanted to know, he listened carefully.

Lu Jian was bombarded with questions non-stop, he didn't even dare to go to the toilet, someone was always filling the water cup, he was afraid that he would not be able to speak because he was thirsty.But he didn't dare to drink too much, just moistened his lips with water.

Wait until he is freed from the crowd.Feeling that he had become a dead fish, he hurried to the toilet while several people were discussing, and when he came out, he finally breathed a sigh of relief, which was much more comfortable.He went to a drain next to the toilet and washed his hands first, then his face, so he became more awake.

When he returned to the work area, they had stopped discussing. Seeing him coming in, except for Zhou Gong and Lu Gong, they all stood up, as if welcoming a hero. Lu Jian went to sit down a little embarrassed.

"Xiao Lu, if we make a research plan according to your ideas, how long do you think we will have results." Lu Gong looked very serious, and asked very seriously.

"One year, it can be completed." Lu Jian thought about it carefully. At present, the FMS system is considered the most modern CNC machine tool technology, and this technology has been developed until the 90s. Huaguo was not introduced until the 80s, lagging behind the rest of the world. There are many countries.Advanced foreign countries have been developing this technology, especially country R, ​​which came from behind and once surpassed countries M and D.Now that he has come to this era, of course he wants to change some of the status quo of the motherland.

In the 21st century, CNC machine tools have already developed three-axis linkage CNC machine tools and five-axis linkage CNC machine tools, and the production capacity has been greatly developed. It is a pity that these technologies are now out of date.This is simply not possible with the current state of the art.The third industrial revolution is a revolution of information technology, and computers are the bridgehead of the information revolution. Without computers, it is difficult for mechanical manufacturing to catch up with the world.It seems that he has a long way to go.

"Okay, this week, let's get out the project plan and drawings first, and then follow Xiaolu's ideas. If you have any questions, you must ask him in time. Comrade Xiaolu, although he is young, he is not young enough to be a Our teacher." Zhou Gong was very serious one second, and laughed again the next second, really worthy of an old drama.

"Yes, yes, Mr. Lu knows a lot, much better than us junior engineers who have worked for a few years." An engineer who looked about 30 years old sighed, they are all the same people, why do you say so? Can be so good.

"Mr. Lu, Mr. Lu will come to you if he has any problems in the future. You must not reject me as a student." Zhao Lei, who went to pour water for him just now, also rushed to talk.

Seeing these people who are so much older than him call him teacher, Lu Jian was a little speechless, and felt extremely uncomfortable.Even in his previous life, he was only a 23-year-old boy. Even if he had outstanding abilities in the research institute, those researchers who had stayed in the research institute for a long time could not lose face and asked him to help them answer their questions.Sure enough, people nowadays are more simple-minded, think more simply, and don't have so many worries.

"Old Zhou, are you alright? Hurry up to eat. The big guys have come back after eating, and you guys have nothing to wait for." Suddenly a person knocked on the door, and it was another person next door to them. Yan Gong, the leader of a project team.

"Thank you, Lao Yan, I'll go right away." Zhou Gong waved his hand when he heard his thanks, and Yan Gong left.

"Everyone pack up. Go to the cafeteria to eat now, remember to bring your food stamps." Lu Gong hurriedly put his notebook into the pocket of his overalls and called everyone to pack up.

"By the way, Zhao Lei, wait a moment and take Xiao Lu to the material department to get two technician's uniforms." Suddenly he remembered something and asked Zhao Lei to do it.

"Okay, I'll go in the afternoon." Zhao Lei put away his things without looking up.

"Everyone can take a break at noon today. Come and gather at 2 o'clock to start discussing the project proposal." Seeing that Zhao Lei returned to him, he hurriedly said another thing.

"Understood." A group of people replied one after another, and then left one after another.Many people in this group are already married and have families here, so they can take a break at noon and naturally go home to eat, leaving only Lu Jian and Zhao Lei for a while.

"Let's go to the cafeteria together?" Zhao Lei issued an invitation.

"I have to go back to the dormitory to get the lunch box first, how about you?" Lu Jian came here early in the morning and didn't have time to pack the lunch box and put it in the backpack.

"I'll accompany you. After getting the lunch box, we'll go to the cafeteria. The second canteen is right next to the dormitory." Zhao Lei thought about it and decided to go to the second canteen for dinner today.The factory area of ​​the machinery factory is very large, the office buildings are on the east side, and the workshop buildings are on the west side.So there are two canteens, one is near the office building and the other is near the factory building.