Rebirth: Start By Hiding In Evil

Chapter 030: You Are Not An Honest Person! (2/4)

The “start-up” of CAD development, the magician will take all the orders and bring them into the field of his subconscious.

In other words, the spirit of the magician is defenseless against its own CAD.

In recent years, CAD itself has the function of making the “start-up” process of reading, faster and smoother adjustment.

But it is also quite easy to affect the spirit of the user.

If the adjustment is wrong, it will not only reduce the efficiency of magic, but also cause symptoms such as discomfort, headache, dizziness or vomiting.

In severe cases, hallucinations may even occur, causing mental damage.

Therefore, the newer the better the CAD, the more precise and dense the adjustment is required.

For a magician, handing over CAD to a magician with unknown strength for adjustment entails a very high risk.

Even if it was the proposal of “Ken” himself, his speech can be called courageous.

“No, I recommend him…

“Let me come!

I am his companion, even if something goes wrong, I can adjust it back. ”

In the face of the 18 risks of the “Ken”, “Mayumi Immediately” asked to take responsibility on her behalf.

However, before he could finish speaking, he was interrupted by “Gojo Satoru” who suddenly stood up.

The words of “Mayumi” should be based on a sense of responsibility.

But from another point of view, these remarks also mean that “Mayumi” did not fully believe Tatsuya.”

Shibo Tatsuya secretly grabbed a handful of his pants.” It’s very unpleasant.

“My CAD also contains some prefixes of ancient magic, which are more complicated than simple modern magic.

As a CAD for debugging, it can better highlight the level of the magician.”

I ignored Mayumi’s worried look in front of him, and “Gojo Satoru” turned his indifferent eyes to Shiba Tatsuya who was sitting next to him.”

Opponents were not given a chance.

“Then, Tatsuya, I’ll give you my CAD!”

This exhortation is particularly resolute.

The spirit of doing things is also reassuring, and there is no objection in the field immediately (mainly, the identity of the Shishi clan has calmed them down).

“Ok, no problem.”

Shiboda also nodded.

Some people and things, even just the scenery along the road, can still make people feel very beautiful just by looking at them.

In addition to being moved, someone who has always been lonely couldn’t help but sigh in his heart: Brother Wutiao is reliable…

The school’s CAD adjustment equipment open to teachers and students is located in the experimental building.

But this time, instead of using the stationary calibration machine in the experimental building, the vehicle-mounted calibration machine actually used in the “Nine School Battle” was moved to the conference room for testing.

The CAD used for adjustment also matches the specifications of the “Nine School Battle”.

As for the preparations before the official game, if you only look at the tools, the preparation procedures are as neat as your peers.

This makes the issue of candidates, which has not yet been finalized, conspicuous.

Shiba Tatsuya “sits in front of the tuning machine, Gojo Satoru” across the machine.

But the two could not see each other and sat on the other side.

The members of the student council and the presidents of the clubs gathered around “Gojo Satoru”.

The first is to start the adjustment machine. At this stage, there are evil eyes watching “Ye”‘s hand.

But this is also “usually operating a tuning machine that’s far more complex than this, so the program won’t go wrong even if you doze off.

He completed the preparation for the measurement smoothly, ignoring those disgusting glances with his poker face.

“My task is to copy Gojo-kun’s CAD settings to use CAD, and adjust it so that it can be used at any time, without changing the activation mode at all, right?”

A sister-in-law confirmed the test content again.

“Yes, sorry to bother you.”

“Mayumi” who had been spying on the debugging side nodded.

#2……

“Tatsuya” shook his head slightly after seeing “Mayumi” nod.

Not nodding, but shaking his head.

“What’s up?”

Mayumi is suspicious…

Did you say something wrong?

“I don’t recommend copying the settings directly to a CAD with a different specification…but there’s no other way, so let’s put safety first!”

“what?”

It’s not just “Mayumi” who is wondering.

Even the onlookers were puzzled by what he said.

“Copy CAD settings” is a common action when the user changes models.

Many people don’t know why Shiba Tatsuya sees this as a problem.

However, the team of engineers headed by “Azusa” finally understood what he meant.

The team members responded by nodding slightly, or grinning and waiting to appreciate Tatsuya’s performance.

Only “Gojo Satoru” frowned.

But didn’t say anything?

“Then do what you want!”

“Mayumi” added a sentence at the end, asking the junior to let go and do it,

From his unremarkable tone, you can hear how conceited he is!

“Okay.”

Tatsuya” didn’t say anything more, and immediately started the adjustment work.

First, connect Gojo Satoru’s CAD to the tuning machine.

The process of reading the setting data is semi-automatic, and it is impossible to show technical differences.

However, this does not directly copy the configuration file to the computing device for competition, but stores it in the work area of ​​the 800 school machine.

Several people showed different expressions after seeing this step.

Is this to show off?

The next step is to measure Gojo Satoru’s own psionic wave characteristics.

“Gojo Satoru” put on the head instrument according to his instructions, and put his hands on the measuring board.

This is a step that must be added to the old model of the machine.

If it is a calibrator with automatic adjustment function, as long as the CAD is installed and the schiton is measured, the adjustment will be completed automatically.

When students use the school’s calibration machine to adjust CAD by themselves, almost all of them end at this stage.

On the other hand, instead of relying on automatic adjustment, manual operation of the CAD execution system for more precise adjustment is the time for engineers to show their strength.

And “Ye” is this kind of person – the big coffee of the fully manual tuning genre.

“Okay, you can take it off.

“Ye” signaled the end of the measurement, and “Gojo Satoru” took off the head instrument.

Generally speaking, the next step is to install the CAD that needs to be set, and fine-tune it according to the results of automatic adjustment.

But “Shiba Fukaya” is obviously not an honest person…

Just want to show off!

(Author: There are two more chapters, I will soon!),