I! Pretending to Be Reborn, Director of Doomsday Hoax

Berry Country is still that great country that no one can match and no country dares to provoke! !

"Everyone, I'm Joseph."

Joseph's introduction was very simple, and there was no need to emphasize any honor at all.

This name represents the pinnacle of mechanics in Berry Country and the authority of mechanics! !

There was respect on everyone's faces.

In particular, countless Berry Country engineers, designers, and people related to mechanical engineering have more or less directly or indirectly received Joseph's guidance!Therefore, this group of people is the worship and respect of Joseph and the students for the teacher!

"It turns out that Professor Joseph is in charge!"

"Wind turbines, it seems that we in Berry Country attach great importance to them!"

"It must be taken seriously! At that time, the Berry Congress will be enclosed in the Snow Fortress, and the air inside cannot be removed, so too much fossil energy cannot be used! At that time, clean energy such as wind energy will become very important!

Therefore, wind turbines can be regarded as the most important weapon of the country, which is related to the survival of the people of the entire country! "

"I see!"

Joseph walked to the stage, pressed a button, and the infrastructure of the omnidirectional wind turbine appeared on the rear projection.

0.....0

"This is... the all-round universal wind turbine!"

Everyone's eyes converged on the past, looking at the sketch that was drawn.

The all-round universal wind power generator is characterized in that,

There are frame columns composed of wind-introducing components and wind-exporting components, and frame plates with mounting bolt holes left on the frame, which together constitute an all-round universal wind cover that absorbs and exhausts wind! There is a wind force composed of fan blades and drive shafts. Drive System,

And, there is a power generation system composed of the generator room, the generator and the parts linked to the drive shaft!

In addition, there is a power system composed of battery room, battery and power distribution components.

Joseph is proud of the all-round universal wind turbine he designed. He introduced:

"According to the claims, the wind introduction component of the omnipotent universal wind power generator is a cylinder composed of various curved surfaces!

The uniform combination of such cylinders can transform the wind in all directions into a whirlwind with fast speed, high density and strong energy to drive the wind turbine to generate electricity!

This combination covers the rotating fan blades and drive shaft in the combined frame, forming a safe and stable overall structure!

The wind exporting component is a columnar body composed of straight and curved surfaces.

The effect shape of the combination of columns is opposite to that of the air inlet components.

The wind direction guide member and the air outlet cover form the air outlet to discharge the airflow in the generator.

The air outlet hood shields the external wind and reintroduces the exhaust air flow. The air outlet hood is an annular or polygonal body with an angular cross section...

The stressed blade surface of the axial fan blade is a tangent surface of a wheel hub whose center is the axis of the drive shaft, and there are reinforcing ribs on the back of the blade surface.

The wind blade surface can have holes or several boards with spacing. In addition to the three-blade wind blade, two-blade or multi-blade wind blades can also be configured.

There are generator installation bolt holes in the frame plate frame, and the frame plate and frame can be in other shapes besides the rectangle.

The generator and the storage battery have an installation room, and the generator and the storage battery are concealed therein, and the generator and the storage battery can also be arranged outside the generator according to actual needs.

And on the outer side of the all-round universal windshield or between the frame columns,

It can also be equipped with vertical wind direction introduction louvers, which are composed of long strip members, and can be a device to adjust the size of the tornado and the wind inlet, which is unidirectional and spins! "Joseph kept pressing the button, and the structure of the omnipotent universal wind turbine was clearly displayed in front of everyone.

Ain's eyes became brighter and brighter.

The design made by Joseph is almost the same as the omnipotent universal wind turbine he envisioned!

It can perfectly transform the calm wind into a powerful tornado that brings powerful electric energy!

but.…

Ain was very picky and asked, "Professor Joseph, I have a question.

"I previously put forward a requirement for the design of the omnipotent universal wind turbine. This wind turbine needs to be used in motor vehicles in the later stage and become a part of the power.

"And now, I don't see this consideration in this design!"

Joseph smiled and said, "Professor Ain, don't worry, please read the next page!"

He seemed to have anticipated that Ain would have this problem.

click.

Turn pages.

Suddenly, a brand new structure appeared in the picture.

"This is"

Looking at the precise, compact, and ingenious structure on the screen, Ain's pupils dilated.

Many people with a mechanical background, their eyes lit up at this moment, recognized this structure.

Joseph said:

"Professor Ain, this is a micro rotor!

"The micro-rotor is a coil structure arranged in a circular frame column. This treatment can make the generator smaller and more compact!

"With this design, the size of the all-round universal wind turbine can be greatly reduced, so that it can be installed on motor vehicles!"

Ain nodded in satisfaction.

to be frank,

The generation of wind energy mainly depends on the Berry Country kites outside the outer wall of the wind and snow.

The internal all-round universal wind turbine is just a supplement, compared with the power generation of the external Berry Country kite, it is almost nothing to mention.

The reason why the all-round universal wind turbine has been valued is that

The most important function is to be installed on vehicles such as motor vehicles,

To create a batch of new energy vehicles to replace traditional fuel vehicles.

Miniaturization is the top priority of the all-round universal wind turbine!

Joseph then introduced the operating principle of this all-round universal wind turbine.

The all-round universal wind turbine consists of circularly arranged wind-guiding component columns, which form a frame column between two upper and lower frame plates.

The wind guiding frame columns are equipped with wind introducing components composed of various curved surfaces, and wind exporting components composed of angular straight surfaces.

The frame plate has a clamping hole at the center of the circle that can be clamped to the bearing, and the drive shaft and the wind wheel are installed in it.

The upper and lower frame plates are respectively connected to the generator room and the battery room,

The generator and battery are buried in the generator room and battery room respectively, which can not only protect these important structures, but also save space.

The generator and the drive shaft are directly connected through gears, pulleys, and gearboxes.

The generator and battery are connected by wires.

There is a frame on the edge of the frame plate, and there are bolt holes for generator installation on the frame.

The air inlet hole formed by the wind introduction member fixed on the outer periphery of the wind drive changes the wind direction acting on the generator to obtain a concentrated, orderly and continuously accelerated and dense super-large wind force. At this time, the strengthened wind drive is installed on the curved surface The wind drive in the component combination frame generates power, and the strong wind that completes the mission is finally discharged from the exhaust holes formed by the wind-leading components!and,

According to Joseph's design,

The all-round universal wind turbine utilizes the vertical space, and multiple generators can be installed on one independent bracket, occupying a very small area.

This allows the all-round universal wind turbine to be installed as a whole or partially applied to a motor vehicle, using the air resistance generated by the vehicle to generate power to provide power and power for the motor vehicle.

Combined with the wind power station composed of the present invention, a charging network is built to ensure power supply!

Joseph looked proud and said:

"According to my design for the universal universal wind turbine,

When the calm wind acts on the generator, it is transformed into a vortex rotation by the swirl wind guiding component. This rotation can be continuously accelerated by the subsequent wind, and the energy density will also continue to increase!

Inside the generator, the energy of rotation will eventually drive the rotation of the axial wind blades, thereby driving the rotation of the wind drive shaft of the generator.Then, the generator wind drives the shaft, and the rotation causes the generator to operate to generate electricity.

This part of the electricity can be input into the battery or directly sent to the grid system, and the electrical appliances can get power through the battery and the grid! ! ” Joseph constantly demonstrated the structure and application of the universal universal wind turbine.

"On a tower support, we can also hang multiple universal universal wind turbines! It can reach a density of two universal universal wind turbines per meter at most! Under the action of wind, dozens of universal wind turbines on a tower support The all-round universal wind generator runs at the same time, works at the same time, and generates electric energy synchronously... The wind acts on the generator, and it is first transformed into the direction of the wind guide outlet by the vertical wind direction guide louvers, and then transformed into a vortex rotation by the whirlwind wind direction guide member. Directional rotation, almost like a tornado...

Dozens of small tornadoes push the multi-stage shaft-cut wind blades at the same time, and their power generation efficiency is immeasurable! ! "

Papa O

Ain: Take it up and applaud.

The next moment, the entire venue burst into loud applause!and.

Chapter 110 Five Tongtian Tower, a Sky Ladder!All over the world show their magic!

"Almighty universal wind turbine, this is the pride of Berry Country!!"

There was a Jiebi in Ain's expression.

This is the wind turbine belonging to Berry Country, a miraculous new-age machine that can burst out huge wind energy in a calm wind!Joseph's expression was agitated, he couldn't hide his excitement, and said:

"Your Excellency, Professor Ain, in addition, we have also enhanced the energy conversion efficiency of the omnipotent universal wind generator...

"We have additionally laid out a double feedback structure!"

The double-feedback structure can ensure variable speed operation, so that the wind turbine can absorb wind energy to a greater extent and improve the operating efficiency of the wind turbine.

Moreover, a large-capacity variable-speed constant-frequency wind power generation system is formed.

In fact, to achieve variable speed and constant frequency, Joseph and many wind energy engineering mechanical scientists have made great efforts.

The wind speed is unstable, and the speed of the rotor of the wind turbine is constantly fluctuating.

The speed of the rotor of the generator that has been increased by the speed-increasing box is constantly changing, and the frequency of electricity generated by the ordinary alternator is also constantly changing.In order for the alternator to output a voltage with a stable frequency, the rotor speed must be kept stable.

That is to ensure the stability of the rotational speed of the rotating magnetic field in the generator.

The magnetic field generated by the rotor of the AC synchronous generator is relatively constant relative to the rotor. When the generator speed changes, the frequency of the output voltage changes accordingly.

If the magnetic field generated by the rotor can rotate relative to the rotor,