King of Industry

In the office of Rongguang Machinery Factory, a reminder from the monkey gave Zhao Guoyang an idea immediately.

Glancing at the phone on the table, Zhao Guoyang stroked the growing beard on his chin and said, This matter, sooner rather than later, I'll call Ning Xiaohong and talk to her.

The monkey naturally agreed with Zhao Guoyang's proposal a hundred times.

Yeah, Miss Xiaohong came here a few times a few days ago, and she said that she must call her back when you come back, the chairman. From what she said, it seems that she has something urgent to do with you! Miao Si on the side Qi also interjected.

Hearing this, Zhao Guoyang smiled at Miao Siqi, then picked up the phone and started calling Ning Xiaohong.

Not long after, Ning Xiaohong's crisp and pleasant voice rang from the other end of the phone.

Hello, Xiangyang Machinery Factory Technical Section, who are you?

Xiaohong, it's mine, Zhao Guoyang! Zhao Guoyang replied directly.

Ah? Guoyang, are you back? These days, Master and I look forward to your hair turning gray! Ning Xiaohong seemed to be a little excited.

Ah? Is it that serious? Then I'm guilty! Zhao Guoyang couldn't help teasing after hearing the words.

Hi, I can't make it clear on the phone, let's discuss it in detail. Guoyang, where are you at the moment, can you come to our factory some time? Ning Xiaohong asked.

Zhao Guoyang thought about it for a while, and there was nothing wrong with his Rongguang Machinery Factory for the time being, so he agreed.

Success, then it's settled! Guoyang, come here as soon as possible, and Master and I will treat you to a good lunch at noon! Ning Xiaohong said excitedly.

Putting down the phone, he turned his head to look at Monkey and Miao Siqi, and explained to them: Ning Xiaohong probably has something important to discuss with me, so I'll just go over there.

At the factory, with the two of you watching, basically I have nothing to worry about. In a word, I hope everyone will continue to work hard and strive to break through six figures in monthly profits as soon as possible. I will send you a big red envelope!

After hearing Zhao Guoyang's encouragement, Houzi and Miao Siqi looked quite excited.

Indeed, judging from the expansion of production scale and the development of the factory, the monthly profit at this stage has almost reached 30,000 to 40,000 yuan, and the monthly profit of 100,000 yuan is definitely something to look forward to.

Zhao Guoyang chatted with the two of them for a few words, then went out and got on the motorcycle, ready to leave.

Before leaving, he didn't forget to tell his uncle that the medicine for his aunt had arrived, and Xiaojing had already sent it to him.

Because He Guoping went out early in the morning, he didn't know about this situation. Hearing Zhao Guoyang's words at this time, his nose was sore, and he almost didn't shed tears.

Seeing the pain on his uncle's face, Zhao Guoyang could only comfort him with kind words.

Uncle, it's a good thing that my aunt's illness can be cured. It's not worth it for you to shed tears for this matter... When my aunt recovers, we will have a meal together with Meimei. , haven’t been together for several years.”

After hearing what his nephew said, He Guoping immediately nodded and said, Yes, Guoyang, what you said is true. When your aunt is in good health, and uncle treats you, I must treat you to dinner!

Well, I'll just wait for the good news, uncle, let's go! Zhao Guoyang smiled and waved to He Guoping, started the motorcycle, and rumbled away.

...

When he came to Xiangyang Machinery Factory again, Zhao Guoyang saw that the sign at the entrance of the factory had changed.

The eight bright red characters of Xiangyang Machinery Co., Ltd. are engraved on the brand-new long signboard, which looks much more magnificent than before.

Although the brand of the factory has changed, the doorman is still an old man.

Seeing Zhao Guoyang coming in on a motorcycle, the guard quickly raised the pole and let him go.

Perhaps it was because the motorbike motor roared so loudly that it attracted people's attention. As soon as Zhao Guoyang entered the parking shed, Ning Xiaohong quickly came out from upstairs.

Guoyang, here! Seeing Zhao Guoyang, Ning Xiaohong excitedly waved to him.

After parking the car, when Zhao Guoyang followed Ning Xiaohong upstairs, he casually asked, Xiaohong, what's going on, you're looking for me so urgently?

Ning Xiaohong hesitated for a moment, then said awkwardly: Hey, it's not about the transformation of the factory.

After listening to your advice last time, Master immediately started preparations after the factory was restructured. However, the development of molds for plastic parts is really not that easy...

After hearing this, Zhao Guoyang nodded and said, Well, of course.

The industry of molds for plastic parts is much more difficult than iron parts. Especially when your factory is involved in this aspect for the first time, it will naturally be more difficult in the initial stage. Tell me, did you encounter any difficulties in production?

Ning Xiaohong shook her head, and said with some shame: It's not a production problem. After our horizontal injection molding machine was purchased, I also designed a simple mold. However, we couldn't even install the mold. Done...

After hearing this, Zhao Guoyang immediately understood.

Indeed, although the horizontal injection molding machine has many advantages, its disadvantages are also obvious.

Especially the installation of the mold is very troublesome. In addition, the insert is like a mold, which is easy to tilt or fall.

After thinking about this, Zhao Guoyang comforted: Well, I can't blame you for this. Horizontal injection molding machines are indeed prone to such problems. Later, you can show me the mold you designed, and I will install it for you. have a look.

Ah, that would be wonderful.

Ning Xiaohong raised her head and smiled, Let's go and tell Master the good news. You don't know, these days, he is so worried that he can't even eat.

Zhao Guoyang's mouth couldn't help turning a strange color when he thought that such a tough veteran like Liao Jingsheng would sometimes be unable to eat.

After entering the factory director's office with Ning Xiaohong, Zhao Guoyang immediately saw Liao Jingsheng sitting there smoking a stuffy cigarette and sighing.

Without waiting for Ning Xiaohong to greet him, Zhao Guoyang shouted loudly: Director Liao!

Liao Jingsheng was taken aback. When he looked up and saw that it was Zhao Guoyang, his face showed surprise.

Ah! Guoyang, you... why are you here? Liao Jingsheng stood up, hesitant to answer.

Ning Xiaohong next to her pursed her lips and said with a smile: Master, just after Guoyang called, he was pulled over by me. The reason why I didn't tell you is to give you a surprise. How about it? surprise?

You girl! You're so naughty! Liao Jingsheng said dumbfounded.

After taking his seat, Zhao Guoyang didn't let himself go, and directly shared his understanding of molds with the two of them.

Referring to the problem that Ning Xiaohong told just now, Zhao Guoyang explained: Director Liao, Xiaohong, in fact, mold installation has always been a link that mold factories pay more attention to. Hiring a professional molder with a high salary is a must.”

An excellent mold worker can not only help you with mold installation and debugging, but also help you find some problems with the mold.

For example, those molds cannot be formed, which are unreasonable mold holes, etc. Sometimes, a reminder of this kind of talent can save you a lot of detours.

Hearing this, Liao Jingsheng said with deep emotion, Yes, Guoyang, you've said it to the bottom of my heart.

To tell you the truth, when our factory just decided to transform into plastic parts molds a few days ago, I thought about hiring a molder. However, I have traveled almost all the counties and districts below Guangling City. But they couldn’t even hire a senior molder.”

After hearing Liao Jingsheng's complaints, Zhao Guoyang consoled him and said, Director Liao, this situation is normal. Our Jiangnan Province, especially the Jiangbei area, is still slightly behind in terms of industrial level.

Let's talk about our Guangling City. There are only one or two mold factories with real strength. There may be only two or three excellent mold workers. In this case, if you want to recruit people, you must It is difficult.

Zhao Guoyang paused, and continued: But there is no rush to poach people, take your time. For the time being, I can still find time to help you with ideas and help. Besides, Xiaohong is very smart and has a strong learning ability. , I think it won't be long before she can be alone.

Liao Jingsheng was overjoyed when he heard the words, and said gratefully: Great, with your words from Guoyang, the first step of our factory's transformation is very hopeful.

Xiaohong, let's go to study with Guoyang later. First, we need to place this mold for learning.

Well, I know, master! As long as Guoyang doesn't hold back, I will definitely be able to learn the same thing! Ning Xiaohong blinked at Zhao Guoyang and said confidently.

Haha, you, you are just a character who refuses to suffer! Liao Jingsheng said with a smile on his face.

For Ning Xiaohong's run on, Zhao Guoyang was also a little helpless.

Seeing that it was getting late, he pointed outside and said, In this case, then Director Liao and Xiao Hong, let's go to the workshop now and solve the problem!

Okay, let's go down now! Liao Jingsheng picked up his coat without hesitation, and led the way straight ahead.

Following Liao Jingsheng and Ning Xiaohong into the workshop, Zhao Guoyang saw a large horizontal injection molding machine in front of him.

Seeing this brand new machine, Zhao Guoyang was stunned and said, Well, it turns out that your factory bought this kind of injection molding machine.

This horizontal injection molding machine is indeed the most common type among injection molding machines. The mold clamping part and the injection part are on the same horizontal center line, and the mold opens horizontally, which is very convenient to use.

Ning Xiaohong said from the side: Yes, when Master and I went to purchase this machine, we heard from the manufacturer that this injection molding machine is easy to operate and has high production efficiency.

It's just that after I designed a mold, I couldn't install it at all... Ning Xiaohong took the mold placed aside and said in frustration.

Looking at the mold in Ning Xiaohong's hand, which was worn out at the edges, Zhao Guoyang shook his head suddenly.