Siheyuan Diaosi Attack

After a while, they came to a workshop. After entering the workshop, the workers led Zou Liangbin and Li Yue to the malfunctioning machine.

Yi Zhonghai stood next to the machine, looking at it with a confused expression on his face.

Because he didn't know what had gone wrong, he sent someone to notify a technician to come and check it out.

Unexpectedly, Li Yue also came.

He said to Li Yue: "Technician Li, you are here!"

Li Yue also noticed him. After hearing his greeting, he just nodded slightly without saying much. His eyes went directly to the faulty machine.

Zou Liangbin carefully observed the machine and asked, "What was the condition of this machine before? Who used this machine before it broke down?"

Yi Zhonghai heard Zou Liangbin's question and replied: "This machine was used by my apprentice. When he was processing parts, the machine suddenly stopped working. We don't know why.

And the parts are still stuck in there.”

After hearing this, Zou Liangbin said, "What about the people who use this machine?"

After hearing this, Yi Zhong looked at his apprentice beside him, pulled him over, and said, "That's him."

Zou Liangbin looked at Yi Zhongkan's apprentice and said, "When you were processing parts, did the machine make any unusual noises?"

Yi Zhonghai's apprentice Du Zemin heard what Zou Liangbin said, thought for a moment, and then said, "Did you hear any unusual sounds when you used it?

As usual, it stopped working for some reason.

Look at the part, it's still inside." Then he walked to the front of the machine.

Zou Liangbin looked at the parts in the machine carefully and found some tiny scratches on them, but these marks were not enough to cause the machine to stop working.

He frowned, lost in thought.

After a while, he suddenly thought of a possibility and asked Du Zemin: "When you were processing this part, did you feel any jamming or increased resistance in the machine?"

Du Zemin shook his head, indicating that he was not aware of such a problem.

Zou Liangbin asked again: "What was your last operation before the machine stopped working?"

Du Zemin recalled, “I remember that I was about to adjust the angle of the tool and was about to stop the machine.

At this moment, the machine suddenly stopped.

Zou Liangbin nodded, as if he understood something.

He said to Yi Zhonghai: "It seems that the problem lies with the knife.

We need to check whether the tool is excessively worn or improperly installed.

If there is a problem with the tool, it will affect the processing accuracy and efficiency, and even cause machine failure.”

He asked Yi Zhonghai to immediately have someone bring a new set of knives and have Du Zemin replace them.

Then they restarted the machine, which at this time did not work.

After seeing this, Li Yue frowned and thought, "This is not a problem with the knife."

He turned to look at Zou Liangbin and said, "Brother Zou, this doesn't look like a problem with the knife, it could be something else.

If there is no response when you start the machine, it means the problem is not with the tool but with the circuit.

Are there any drawings of this machine?"

Zou Liangbin listened to Li Yue's words, pondered for a moment, and then slowly said: "Yes, there are, but they are all in Russian, I can't understand them at all.

And the drawings are all in the technical department. If I can’t fix it, I can only go to the director to explain the situation and ask him to ask someone from the technical department to come and take a look.”

After hearing this proposal, Li Yue frowned slightly. It was obvious that he was somewhat dissatisfied with leaving such a small problem to the director.

In his heart, he muttered, "Of course he can fix this little problem, but I don't want to be too exaggerated."

He paused and looked at the machine beside him, because he knew that he was fully capable of finding the problem based on experience.

He raised his head and said to Zou Liangbin with a firm gaze: "Brother Zou, that's not necessary.

I studied these machines in depth when I was in school, and I could tell what was wrong with them at a glance.

I'll check it out right away, it should be fixed soon."

Zou Liangbin heard this, a trace of worry flashed across his face, he glanced at Li Yue, and his tone revealed a hint of uncertainty: "Li Yue, can you really do it?

This is not a joke. If you break it, you will be responsible.

Why not let the technical department handle it? They are more professional."

After hearing this, Li Yue smiled slightly, patted his chest, and expressed his confidence: "Brother Zou, don't worry.

Although I'm new here, I know as much about these machines as anyone else.

If I really break it, I will take the responsibility.”

His words were full of confidence and determination, as if he had seen the light of hope for a solution to the problem.

Zou Liangbin looked at Li Yue's confident look, and his worries were slightly alleviated.

But he still reminded: "Then you have to be careful and don't be too stubborn.

If it really doesn't work, then don't do it yourself, let's go find the director together."

The system prompt sounded melodiously in Li Yue's mind: "Ding - the host successfully solved the machine failure and showed his skills in front of others. His technical strength is impressive!

Complete the task and get 100 points as a reward. "A hint of surprise flashed across Li Yue's eyes, and the corners of his mouth slightly raised, and he secretly said in his heart: "This task is simply a piece of cake!"

Li Yue listened carefully, nodded slightly, and then prepared to check the machine.

He glanced at the machine, took a deep breath, and then said to Zou Liangbin in a deep voice: "Brother Zou, please turn off the power of the machine. I am ready to start."

After hearing this, Zou Liangbin acted quickly. He walked to the power box and searched for the power switch with sharp eyes.

After finding it, he decisively pulled down the knife switch, the power was instantly disconnected, and then he returned to Li Yue and said to Li Yue: "Li Yue, the knife switch has been pulled down, you can start now."

After hearing Zou Liangbin's confirmation, Li Yue acted quickly and professionally.

He gently pulled open the circuit cover, revealing the complex circuits and circuit boards.

He examined every detail intently, his brows sometimes furrowed and sometimes relaxed, as if he was communicating silently with these circuits.

He slid his fingers lightly across the circuit board, feeling the temperature and texture of each component.

His eyes were as sharp as an eagle, and he would not miss any possible problem points.

His eyes were focused and serious, and every subtle movement seemed so skillful and confident.

The workers nearby saw this scene and couldn't help but look at Li Yue with new eyes. They all started to talk about it: "It seems that this new guy is not simple. He started to check him right away."

Yi Zhonghai watched from the side, muttering in his heart: "Li Mu is a guy who dares to do this when he just arrived. Isn't he afraid that he might mess things up?"

Qin Huairu was also watching Li Yue from the side. He did not expect Li Mu to come to their workshop to repair the machine. He just watched. Suddenly, he stopped what he was doing, as if he had discovered something. He muttered in a low voice: "There seems to be something wrong here."

Zou Liangbin heard Li Mu's muttering while busy. He came over curiously, frowned slightly, and asked in confusion: "Li Mu, did you find any problem?"

Li Mu stared at the circuit board intently, his voice revealing a bit of nervousness: "Well, I noticed that there seems to be traces of burns on the circuit board here, which is probably caused by an electric spark.

I want to see what's inside this little box lid."

As he spoke, Li Mu carefully opened the lid of the small box, and his eyes immediately focused on the fuse inside.

He took a deep breath, and with a hint of certainty in his voice, “It seems that the fuse has been blown by the ignition, and the resistor and capacitor may also be affected.

Don't worry, though, getting a new one should solve the problem.

As for other potential problems, we will investigate them carefully after replacing this one.”

After hearing this, Zou Liangbin nodded, his voice full of trust: "Okay, Li Yue.

Then please write a list of the parts that need to be replaced. Once you finish writing, I will go to the logistics department to pick it up."