Siheyuan Diaosi Attack

After leaving the office building, they headed straight towards the workshop.

They came to the workshop, and Li Yue looked confused, not knowing what to do.

He looked at Su Chen and asked anxiously: "Brother Su, what are we going to do now?"

After Su Chen heard this, he looked at Li Yue with a gentle gaze and said slowly: "I'll go take a look at the workpieces for the production task first."

After hearing this, Li Yue exclaimed!

He followed Su Chen closely and walked inside.

Wang Hao stood aside and said to Li Yue with a smile: "We mainly check the roughing unit, finishing unit, frequency conversion unit, and flying shear unit. The main task of coming to the workshop is to see whether the workpieces processed by the workshop are qualified, whether there are any problems with the processing quality, and the operating performance of the machine and the condition of the machine."

Li Yue listened and nodded repeatedly, muttering, "Oh! So that's how it is?"

Li Yue thought to himself: "I have some skills in design, but if something goes wrong during the processing, how can I deal with it? Especially since he doesn't know how to do these skills, such as locksmith, forging, lathe, grinding, welding, milling, etc.!

He only knows how to design and repair, and at most can tell which ones are unqualified or have problems based on the drawings. But when he really has to face the various difficulties that arise in actual processing, he is very worried!

Li Yue sighed secretly in his heart. The knowledge he possessed was limited to design, drawing and some advanced production techniques. He did not have the skills of a technician at all.

What should I do?

Hey~! I can only follow Su Chen and learn how to do it first!"

Su Chen came to the place where the processed workpieces were piled up, looked at the drawings and parameters, picked up a workpiece and looked at it carefully. After a while, he handed the workpiece to Li Yue after he finished reading it. Li Yue took the workpiece and looked at it, and said, "This workpiece is only of medium quality, and then put it down."

After hearing this, Su Chen smiled and praised, "Li Yue, your eyesight is really good. It took me a while to figure it out, but you can figure it out in just one look. You are really amazing."

Li Yue was a little embarrassed when Su Chen said this and said, "Is it difficult to judge the quality?

This is just an ordinary workpiece."

Wang Hao listened at the side and picked up the workpiece that Li Yue put down and looked at it carefully for a while before speaking: "Hey! Li Yue, how did you tell that? It took me a while to tell the quality of this workpiece. How did you tell it at a glance?"

After hearing this, Li Yue replied: "Just use your eyes to see!

How else can you see it? "

There was a hint of indifference in those words.

After hearing this, Su Chen and Wang Hao didn't know what to say for a moment, and their expressions were quite complicated.

Wang Hao was so angry that he wanted to curse! Is this human language? Everyone sees with their eyes.

Su Chen saw Wang Hao's embarrassment! He immediately looked at Li Yue with a hint of amusement in his eyes, and slowly said, "Li Yue, what Wang Hao meant is, what is the trick to this workpiece?"

After hearing this, Li Yue scratched his head a little embarrassedly, and his originally shiny black hair swayed slightly. His face flushed slightly, and he lowered his voice a little and said: "This, it's actually very simple.

First of all, you need to carefully observe whether the appearance of the workpiece is neat and whether there are any flaws or damages, even the slightest.

At the same time, use precise calipers and other measuring tools to carefully check whether the size of the workpiece meets the design requirements, including the length, width, thickness, etc.

Then, you need to pay close attention to the processing details of the workpiece, such as the accuracy of drilling and the smoothness of cutting.

When drilling, special attention should be paid to whether the center position of the hole is accurate, whether the axis of the hole is absolutely perpendicular to the reference plane of the workpiece, and whether there is even a very small error in the hole diameter.

Furthermore, it is necessary to have an in-depth understanding of the machining process of the workpiece, including the equipment used, the types and advantages of the cutting tools, the settings of cutting parameters, etc.

Then, use the extremely sharp naked eyes to directly observe the appearance of the workpiece to see if there are any obvious defects, even those that are extremely subtle, such as traces of breakage, macroscopic cracks, bending deformation, twisting deformation, and the sound will be crisp and pleasant when there are no defects on the surface, and low or hoarse and unpleasant when there are defects. This can be used to extremely accurately determine whether there are shrinkage holes or cracks inside the workpiece.

In addition, by touching the surface of the workpiece with your soft and sensitive fingers, you can truly feel its surface condition, such as how smooth it is, whether there are even very tiny burrs, etc. This is also an extremely important key link in judging the quality of the workpiece. Through such a series of extremely focused observations and extremely precise judgments, you can quickly get an extremely accurate result. "

Then he continued, "When I saw Brother Su drawing the blueprints and the detailed parameters, I just looked at them for a while. When I looked at the workpieces myself, I could see them quickly."

After Wang Hao heard what Li Yue said, the smile on his face froze for a moment, then he grinned and said: "Hey! I didn't look at it when you were looking at the drawings, and these things are really only possible with your observation skills.

I'm not as observant as you, nor as fast as you."

Li Yue scratched his head, and his short black hair swayed a few times. He blushed a little embarrassedly, and replied in a slightly lower voice: "Brother Wang, it's really nothing. I'm just more sensitive to these things. It seems that I am born to be more aware of these subtle differences."

After hearing this, Su Chen gently waved his hand and said, "Okay, let's check it out quickly.

I'll go to other places later to see if there's anything substandard."

Wang Hao laughed even more happily after hearing this, and said loudly: "We have someone as powerful as Li Yue here, we can finish it quickly."

After saying that, he couldn’t help it, hahaha!

He burst into laughter, and the hearty laughter echoed in the workshop.

Su Chen glanced at him, frowned and said, "Okay, stop laughing!

Check it out quickly."

Wang Hao quickly stopped laughing and took over the conversation, "Okay, let's check it out."

Su Chen nodded and immediately began to check it carefully. His focused eyes seemed to penetrate every workpiece, and he finished the inspection in a short while!

He put all the unqualified workpieces aside one by one, his movements skillful and steady.

Li Yue stared at the parts that popped out, staring at them closely, thinking to himself: Why are my qualified parts so low?

Then he looked at Su Chen, his eyes revealing a hint of anxiety and worry, and said anxiously: "Brother Su, is the qualified rate of parts produced by our factory so low? Only 70% are qualified, and 30% are unqualified. This is too low."

After hearing this, Su Chen sighed helplessly, shook his head and replied: “Sometimes it’s high and sometimes it’s low, there’s nothing we can do about it.

The machine is like this, and the product is like this!"

After listening to this, Li Yue pursed his lips tightly, frowned and said: "I see that some of the products here are of high quality, some are of medium quality, and most of them are of low quality!

This won’t do, it’s just barely acceptable.”