Siheyuan: Building a strong dragon country on the eve of the anti-eagle war

Today's breakfast is much more normal.

Zheng Guo ate steamed bread with pickles, which was also delicious.

Seeing that Zheng Guo showed signs of choking, Master Xu hurriedly handed him the enamel pot.

"Thank you, master!"

After breakfast, Master Xu took Zheng Guo to the new workstation, where there were three three-axis lathes and several outdated single-axis lathes.

"Master, you are here!"

The person who was speaking was Master Xu's second apprentice, Lin Xueming. He was best at operating a lathe.

"Hello, Second Brother!"

"Ok!"

"Xue Ming, Xiao Zheng will be in your care today.

You are better than me at the lathe!"

"Yes, okay, Master!"

Master Xu moved a stool and sat here to watch.

Seeing that the lecture was about to begin, Zheng Guo immediately started his glorious moment.

"Junior brother, let's start with the oldest single-spindle lathe...

This lathe is mainly composed of a bed, a spindle box, a feed box, a slide box, a tool holder, a lead screw, a guide bar and a tailstock. A lathe is usually needed to process complex parts.

Over there is a three-axis lathe that can process more complex parts..."

Zheng Guo had greeted his second senior brother before, but he also heard from his master that this senior brother was not very talkative.

So, the explanation was just the explanation, without any unnecessary words.

"Okay, little brother, now you have a general understanding of the lathe. I will start to operate it. You watch first. If you don't understand, ask me. Then you can try it later!"

"Okay, Senior Brother!"

The lathe started up and immediately made a rumbling noise. As the processing of parts began, sparks flew and a sharp noise was made.

Lin Xueming was working on his own while Zheng Guo was watching him carefully from the side.

An hour had passed and Lin Xueming showed no intention of stopping, and Zheng Guo did not take the initiative to ask.

Master Xu couldn't stand it anymore, so he came to Lin Xueming and coughed a few times.

"Ah, Master, what's wrong with you?"

"Xue Ming, I asked you to lead people and you lead them like this!"

"Oh!"

Lin Xueming then looked at Zheng Guo and smiled embarrassedly.

"Little Junior Brother, do you understand?"

"I roughly understand it."

"Yes, that's right. I'm processing a SUJφ10 φ6 10 400 rod holder now. Do you know the specifications?"

"Second Brother, I understand this!"

"Can you tell me how to control the size first?"

Zheng Guo came to Lin Xueming and pointed to the scale on the lathe.

"Well, that's good. Then you try it first and let me see!"

"Ok!"

Lin Xueming took the initiative to give up his position.

At that time, Zheng Guo simulated all of Lin Xueming's actions in his mind again and picked up a new piece of material.

Master Xu shook his head.

Well, one dares to take the lead, and the other is a newborn calf that is not afraid of a tiger, he really dares to take action.

Zheng Guo put the previously processed materials on the lathe, tightened the slot, and then pushed the operating lever slowly towards the chipper.

Yes, Lin Xueming's movements are very slow.

But when the material and the peeler collided, Zheng Guo knew that something bad was going to happen. It was obvious that the noise and sparks were not right, and there was even a sharp squeaking sound.

Lin Xueming watched from the side and didn't say anything.

The usage is correct, but you have to figure out how to control the force of a single-axis lathe by yourself, and it may not work even if you are told.

Once you can use the single-axis lathe well, it will be easier to operate the three-axis lathe.

Seeing that Lin Xueming didn't say anything, Master Xu was too embarrassed to say anything.

Zheng Guo pushed the joystick again, and the movement was much slower, but it was still wrong. He tried it a few more times and it was the same every time, so the first piece of material was wasted.

"Junior brother, it's okay, just continue!"

Zheng Guo was a little confused.

Suddenly Zheng Guo remembered that he could open the Miracle Glory Moment after the system upgrade, but he had been reluctant to open it because of the large number of points.

Zheng Guo silently said, "System, start the miracle glory moment."

[Ding, the miracle glory moment is open, the time is 20 minutes, and the countdown starts at 20:00]

After the system sounded, Zheng Guo did not have any special feeling. It was just like opening an ordinary glory moment, which made Zheng Guo a little disappointed.

Continuing the operation, the problem still occurred in the contact between the peeling knife and the material.

Zheng Guo was so anxious that sweat broke out on his forehead until two more pieces of material were wasted during processing.

Master Xu was also anxiously watching from the side.

But Lin Xueming was extremely calm and even nodded from time to time.

Soon, the system sound rang again.

[Ding, the miracle glory moment ends]

That's it, not even a feather is left.

Zheng Guo was unwilling to accept this and gained 80 more points of honor. Is that it?

Zheng Guo continued to recite silently, "System, open another miracle glory moment."

[Ding, the miracle glory moment is open, the time is 20 minutes, and the countdown starts at 20:00]

As a result, twenty minutes passed quickly, and the system ended sound rang again, and what came back was that three more pieces of material were damaged.

This is too infuriating. Zheng Guo feels that the new function is useless except for scoring points.

No, he has a stubborn temper. Zheng Guo just doesn't believe it. Deducting so many points is the same as his normal state?

Finally, Zheng Guo once again opened the miracle glory moment. When he heard the points were deducted, he felt a little sad. In a short while, 300 points of glory were gone.

Continue operating the lathe.

[Ding, congratulations to the host for obtaining the master-level fitter skill reward when opening the miracle glory moment]

The system sound rang again and Zheng Guo stopped what he was doing.

Immediately, an enormous amount of memories flooded into my mind.

Seeing that Zheng Guo closed his eyes and did not take any action, Lin Xueming was not in a hurry. Based on his experience, he judged that this was his junior fellow apprentice summarizing his experience.

But Master Xu was anxious, fearing that his young apprentice would do something bad.

After a long while, Zheng Guo opened his eyes.

The memory of master-level machinist skills is much more than the memory of sharpshooter experience, and it makes my brain hurt.

[Ding, the miracle glory moment ends]

The pain became more intense.

Zheng Guo immediately recited silently and started the glorious moment.

The state was turned on again and the pain was within the tolerable range.

At the same time, Zheng Guo began to digest the memory of the master-level benchwork skills.

At this time, Lin Xueming seemed unable to bear it anymore.

"Junior brother, if you are tired, take a rest first and think carefully. The most difficult thing about this single-axis lathe is to control the force, especially when machining and cutting."

Master Xu also spoke up, "Xiao Zheng, you learn much faster than others.

Lathe is the most difficult job among our locksmiths.

Don’t be impatient, take your time, once you can operate the lathe, you will be a master! ”

Zheng Guo opened his eyes and shook his head vigorously, suppressing all other thoughts and focusing on retrieving his memories about the lathe.

Finally Zheng Guo knew where the problem lay.

First of all, it’s not a problem with his technique, but that the lathe in front of him is severely worn. If he wants to continue using it normally, it all depends on the workers to adjust the force.

Damn it, this second brother is a bit of a rip-off.

But then again, there are only a few lathes in the workshop, and the three-axis lathe is the treasure of the small parts processing workshop. They would definitely not allow themselves to touch the three-axis lathe at the beginning.

"Master, Second Brother, I know what the problem is."

"What?"

Master Xu opened his mouth wide and looked at Zheng Guo with an expression of disbelief.

Lin Xueming was still as steady as an old dog. He smiled and said, "Junior brother, just keep going! Once you have mastered the control of strength, it will be easy for you to use any tool!"