Siheyuan: My wife is Xu Huizhen

Chapter 255 Getting Started

Li Hongying said aggrievedly: "Zhu Zi, do you think there are lathe workers everywhere? In our area, there are only lathe workers in the steel rolling mill and heavy machinery factory. Where can we recruit them in the society?"

He Yuzhu didn't know what to say after hearing this. Come to think of it, lathe operators are all technical workers. To train a lathe operator, one must first have machine tools. How could there be so many machine tools before liberation?

The steel rolling mill was not originally large, with only three to five hundred people when it was a public-private partnership. Later, the country imported a large number of machine tools from the Bear Country, and gradually expanded its scale.

Even if there were some lathe workers in the society who had already been recruited, it would not be easy to build a machinery factory from scratch on the street.

Although Li Hongying is the director of the street, it is not a problem for her to just say hello to the factory and ask them for help. However, it is impossible to dig out the workers in their factory.

Therefore, he cannot take part in the poaching incident. After all, his status is there, and it is a public act.

It would be different if He Yuzhu came forward. As long as the treatment offered by the street office is the same as that of the original factory, it would be possible to poach a few workers.

Even if the leader of the other factory came to Li Hongyingying, she could refuse to explain and let He Yuzhu take the blame.

When Li Hongying told him to go to the two factories to find workers, He Yuzhu understood.

"So I have to be the villain!"

Li Hongying said angrily: "Just tell me whether you will do this or not?"

"Fuck, can't I just go and poach people?"

He Yuzhu was also speechless. Director Yang of the steel rolling mill was also very nice to him, and the people who tried to poach him always felt a little embarrassed.

The heavy machinery factory was not bad either. They had invited me to dinner before and we had a good relationship there. What's more, my cousin's husband Tong Zhi was still a technician in the workshop. If they poached people from the heavy machinery factory, would it have any impact on him?

Forget it, let’s poach people first. If that doesn’t work, we can always second them.

He Yuzhu said: "We can find a few apprentices to help us first. It is better to train our own workers."

"Okay, let's hire 10 people and start the factory first."

It is easy to find apprentices as many people are moving into the city right now, so this is a relatively simple matter. The difficult part is finding skilled lathe operators.

Li Hongying then said, "After research, the street has decided to let you be the office director first. What do you think?"

"Who is the factory director?" He Yuzhu asked.

"There is no factory manager for now. You take charge first. We'll talk about it after the factory is up and running."

"No, I don't have to solve every problem. How about letting Old Shen take over for a while?"

Old Shen is the director of the cannery. He used to work with He Yuzhu. He managed the cannery in an orderly manner. Whether it was the purchase of raw materials or daily production and operation, everything was done in a proper manner, and the accounts were clear without any problems.

He Yuzhu didn't want to take the lead in being responsible for this kind of daily management.

"We also considered Lao Shen, but the canning factory is about to enter its peak season, and it is still a question whether he has enough energy to be in charge of the machinery factory."

He Yuzhu said: "But I don't want to be responsible for this kind of daily work. Every day is full of trivial matters."

Nowadays, workers have low levels of education and conflicts often arise among them. As a factory manager, I often have to deal with issues between workers.

After all, the factory represents the organization and needs to take care of everything from birth, aging, illness and death of the workers.

He Yuzhu didn't want to get involved in such trivial matters.

"Okay, I don't want you to manage those things."

After talking to Li Hongying, He Yuzhu went straight to the heavy machinery factory. After registering, he came to the precision machinery workshop.

I didn’t find Tong Zhi in the office in front of the workshop, so I went into the workshop and quickly found Dazhuang.

"Where's Tong Zhi?"

"You're here. The factory has been working overtime to produce a batch of equipment recently, and Tong Zhi went to a meeting to study the drawings."

"Are you busy at the factory recently?"

"Yes, all industries need to develop rapidly and require a lot of mechanical equipment. We have to work overtime every day to produce them."

Come to think of it, the country is currently carrying out Project 156, and it is the busiest time. All factories and mines are actively engaged in construction and production. As one of the few manufacturers in the country that can provide heavy equipment, the heavy machinery factory certainly cannot be idle.

"This is troublesome. Where can I find someone?"

If their production tasks were relatively small, He Yuzhu would be confident that he could recruit a few people over there, but if they were already quite busy, it would not be easy to recruit people.

Besides, the heavy machinery factory is a large state-owned enterprise. No matter how badly the workers there perform, they can still save face by telling others about it. They would not think of working in a small machinery factory on the street.

After all, the larger the factory or mine, the better the welfare benefits, which are far beyond what the streets can compare with.

"Are you looking for someone to produce something?" Dazhuang asked.

"No, you are not someone else. I told you that there are more than 20 machine tools on the street, and I want to find a few lathe operators."

He Yuzhu asked: "Are you willing to go over and be the workshop director?"

Dazhuang's skills are pretty good, it would be nice for him to be a workshop director.

Da Zhuang was stunned for a moment, then quickly shook his head: "Are you kidding me? I'm doing well here, why would I run to your street?"

He Yuzhu said: "You can be the workshop director in the past!"

Da Zhuang still shook his head: "You must be joking, there are only a few of you?"

He Yuzhu smacked his lips and chuckled. The machinery factory was still a mess and there were no people there.

"How about you introduce me to some masters?"

“No one would want to go there.”

"Where is the retired master?"

"There are not many retired people. Those who have retired have been rehired."

He Yuzhu was a little disappointed. He chatted with Dazhuang for a while, and soon saw Tong Zhi coming back.

"Brother-in-law, why are you here?"

"I have something to ask you."

"Okay, but we're almost off work, let's talk about it slowly at noon."

When Tong Zhi saw He Yuzhu, he thought of his superb cooking skills. Since he had come here for something, he would of course take this opportunity to ask He Yuzhu to cook a few dishes to satisfy his cravings.

"Okay, let's talk about it at noon."

Tong Zhi gave Dazhuang a look, and the other party immediately understood, turned off the computer and went out to buy groceries.

Tong Zhihao invited He Yuzhu into the office, chatted about family matters, and asked about their life as a couple.

Ever since Meimei and Tong Zhi got married, He Yuzhu has not seen them.

Tong Zhi said embarrassedly: "It's OK, we just live together as a couple."

He Yuzhu didn't ask any more questions, but looked at the drawing on the table. It was a dimension drawing of a part, and there was a handwritten production process flow below it.

He Yuzhu looked at it carefully and finally understood how a part was produced.

Normally, a blank is produced first, and its size is much larger than that of the part.

Then it is placed on a lathe for processing. It takes many steps to process a blank into a standard part according to needs.

What needs to be done in each step must be planned in advance. This is the process of the production process.

The lathe operators will process the parts according to the process given by the technicians. Each lathe operator is only responsible for one step of the process. Only after being produced by multiple workers will it finally become a qualified component.

Finally, the assemblers will assemble all the parts into a mechanical assembly, and then assemble them into a complete machine.

He Yuzhu had nothing to do, so he asked about the above parameters, what they meant, and some knowledge on the drawings.

After all, he would soon be managing a machinery factory, so He Yuzhu had to be able to understand the blueprints so as not to be completely in the dark and understand nothing.

Tong Zhi patiently explained and taught some basic knowledge about drawings, and He Yuzhu soon understood it.

Suddenly, a line of system messages passed by:

[You have learned a new profession - Mechanical Technician, level 1]

There was no expression on He Yuzhu's face, but he was extremely happy in his heart. He looked at the drawing in front of him again, and suddenly he felt enlightened. He knew the processing requirements of this part like the back of his hand.

With this ability, He Yuzhu will be more confident about his future work.

He Yuzhu asked Tong Zhi to take a few drawings, and then He Yuzhu was able to easily identify the parts and tried to simply write the process flow, which made Tong Zhi exclaim that this was incredible.

Question: “Have you learned this before?”

"I have learned how to cook." He Yuzhu said happily. Since receiving the system message, he would be reminded to increase the technician's experience every few minutes. Now he has gained more than 10 points of experience.

"By the way, we're going to have dinner."

Tong Zhi didn't bother to understand why He Yuzhu could write technical processes by looking at drawings. He simply put the drawings away and went to the dormitory building with He Yuzhu.

You can smell the aroma of food from a long distance away. After all, the food is cooked in the corridor, and the fragrance can drift from far away.

When we went upstairs, the corridor was already crowded with people, and with the addition of the people cooking, walking was like wading through mountains and rivers, extremely difficult.

It was not easy to squeeze to the door of Tong Zhi's house. After entering, Meimei was picking vegetables in the house. When she saw He Yuzhu, she smiled and said, "Cousin-in-law, you are here. Please take a seat."

"You're welcome. I brought something for you."

When He Yuzhu entered the factory, she was holding a bag in her hand. Tong Zhi didn't ask, and He Yuzhu didn't say anything. He only gave it to Meimei when he saw her.

These are cosmetics I bought in Moscow. There are lipsticks, lip glosses and some things that I don’t know how to use. It’s in a gift box, perfect for giving to Meimei.

"Thank you, cousin."

After thanking her, Meimei took it, opened it and saw that it was imported cosmetics, then thanked her again.

Tong Zhi asked: "Is there any wine at home?"

"No, didn't I ask you to finish drinking it yesterday?"

Tong Zhi slapped his forehead and suddenly realized: "Look at me, I'm going to buy two more bottles of wine."

Then he asked He Yuzhu to sit down and turned to leave.

He Yuzhu washed his hands and put on an apron. Just as he was about to start cooking, Meimei suddenly asked, "Brother-in-law, are you still hooking up with Wenli?"

"What nonsense are you talking about? Wenli and I are innocent. We were just dancing together before, but after dancing for a while, I lost interest."

"Tsk, stop coaxing me. Wenli calls your name even when she's asleep, and you still don't admit it?"

"What do you mean by admitting me? It's all nonsense. You are just guessing."

"Well, I don't have any evidence, so I can't do anything to you two."

He Yuzhu hurriedly took out the meat and stayed away from Meimei to avoid her asking too many questions.

Soon, Tong Zhi came back with two bottles of wine, He Yuzhu fried four meat dishes, and together with Dazhuang, the four of them started drinking.

During work in the afternoon, He Yuzhu first learned drawing from Tong Zhi, and then he went out for something, and He Yuzhu came to Dazhuang again.

Before he mastered the skills of a technician, He Yuzhu just looked around casually and had no idea what he was doing.

Now He Yuzhu understood what Dazhuang was doing after looking at his operation. He was currently turning the outer circle of a cylindrical frame. After clamping the part with a fixture and starting the lathe, the part began to rotate rapidly.

Dazhuang then manipulates the tool to turn off a shallow layer, shave off another layer, and then adjust the size and shave off another layer, and he does this layer by layer until the size of the part meets the technical requirements.

Then take the part off the lathe and put it aside, then replace it with an unprocessed part and reprocess it.

He Yuzhu looked at two in a row and then said, "Why don't you let me give it a try."

"What made you think of trying this?"

"I think this is very interesting. Seeing that I can process the parts myself is also a very fulfilling thing."

"You are right. That's right. Every time I see that I can produce qualified products, I feel very happy and proud."

After Dazhuang finished making this part, he instructed He Yuzhu to take the new part and put it on by himself, and then explained the operation of the lathe, just like teaching an apprentice.

He Yuzhu's learning ability is amazing. After reading it once, he learned it almost completely. With Dazhuang's guidance, although He Yuzhu was a little unfamiliar with it, he did not make any mistakes.

When the parts were machined out, an entry popped up in front of He Yuzhu:

[You have learned a new skill - Lathe, level 1]

Just as I expected, after a simple learning and some actual practice, I was able to master the turning technique.

This is a precision workshop where the parts made here are of a relatively high quality. They have a full set of six types of lathes. He Yuzhu said, "Why don't you teach me how to operate the other types of lathes?"

Dazhuang looked around and didn't see the workshop director, so he said, "Okay, these are all small things, but there is no use for you to learn this."

He Yuzhu said: "There is no other way. I will be working in a machinery factory soon. I have to learn some basics so that I won't be completely in the dark when I look back."

Dazhuang shook his head. Isn't it the case that the ears are pierced just before getting into the sedan chair? What's the point of learning it for an afternoon and then just touching it?

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like