The group gods who retired to fish in Genshin Impact

Chapter 1551 The second version of the triangle head helmet is ready, but it is a bit big. This fabr

Hahahahahahaha, I knew I could do it.

Didn’t I say before that I made that triangular head helmet? The first version was too small, so I wanted to make a second version. However, since the cardboard for the second version was almost used up, I found some new cardboard and never started work.

I was recalculating the second edition of data the past two days, and my elderly father was not at home these days, so I didn’t go to his place to do the work.

After the old man came back from his trip last night, I went to sit with him again this morning. In one morning, I finished making the helmet that took me two or three days to make.

This time the height of the helmet has increased by 10cm, the length has increased by about 20cm, and I have also enlarged each panel a lot.

And the combination is really nice. It is very big. How big is it? It is half the size of me.

Yes, you heard it right, the helmet is half the size of a person, so I don’t have to worry about not having enough space to fit a helmet or a hat inside.

But the problem of replacing it also arises, which is how can I wear that thing on my head securely and make my body look less small.

After all, it can now cover my entire body and shoulders.

Although the pattern is correct and very similar to the movie version, the proportions between the helmet and the human body are still closer to the proportions in the game.

Because the game does not need to consider realistic factors, such as inertial weight and the inconvenience of character movement, the proportions can be made very exaggerated.

And the design is more imaginative. Although it is not that imaginative, it is still more like a fantasy work compared to the movie version.

In order to take into account the actors' movement transformation and performance as well as inertia and weight, the movie version specially modified the helmets.

Although the helmet is still half the size of a person, it is slimmer and lighter.

Because the front end of the helmet in the game is not the sharp triangle we normally think of, but it becomes a flat surface after extending to the front end, as if the top corner of the triangle has been chopped off.

In the movie, it was changed to a sharp triangle, which made the helmet slimmer and more convenient for the actors.

But even so, it wasn't very convenient for the actors. However, the shape after being changed to a sharp triangle was unexpectedly popular, so in subsequent games, the triangular helmets were also made into sharp triangles.

I made the helmet while watching the movie and the behind-the-scenes work. When the actor behind the scenes wore the helmet, it was difficult for him to walk.

Although it was made of very light material, the helmet was very large and the person could not really be seen clearly.

Before the actor behind the scenes walks, the staff next to him will help him clear the road in front of him, sweep it flat, help him adjust the direction and pose, and then everyone will step aside before filming begins.

For a camera that doesn't move, bring the person over first, then stand there, put on the helmet, hold the knife, and strike a pose before starting to shoot.

If it is a shot that requires action, a group of staff will help him pave the way in front, while another person will give him voice prompts and be ready to help him adjust the direction at any time.

The visibility of helmets made by professional movies and prop makers is so low, you can imagine what the helmets made by us ordinary people will look like.

This time, we have completed the rough outline of the helmet, and now we just have to wait for the decorations to come back.

Then manually polish and carve it, and then glue it all to the helmet and it's almost done. Then find a discarded hat or helmet at home and glue it in, and you're done.

After I get my royalties next month, I'll go buy a bucket of paint or some spray paint and paint the helmet and knife, and that'll basically be it.

Then buy some cloth to make a pair of pants and an apron and you're done.

Speaking of this apron, it should be more accurately called a culottes.

Because I am making the movie version of Pyramid Head, and I did repeated research on the movie and behind the scenes.

The apron worn in the movie version of Triangle Figure is an apron in the front and pants in the back, that is, a culottes.

Then in the movie, it was shown to be sewn together with human skin.

I don’t know what kind of cloth the movie props team used behind the scenes, but it looked like human skin anyway.

The entire apron and pants look like they are made of several large pieces of human skin sewn together. The seams are particularly obvious, and the texture of the human skin is also very strong.

I don't know what kind of cloth it is. I searched for it on the Internet for a long time. The ones that are more consistent with the movie performance include the cloth used to make raincoats and the cloth used to make aprons for butchers in slaughterhouses.

Only these two types of fabrics are more in line with the texture of human skin, but there is also a corresponding problem, that is, raincoats are not comfortable to wear.

Wearing it for a long time may cause skin abrasion or other damage.

And a common problem between raincoat cloth and butcher cloth is that they do not have the color of human skin.

There is no need to say much about raincoats. I'm sure no one wants to go out on a rainy day wearing a flesh-colored or human skin-colored raincoat.

Not to mention whether my clothes are intimidating or not, if I scare someone timidly, then I will have to pay for my life.

The cloth used for butcher's aprons is simply black, because black is the most resistant to dirt, and there is a lot of blood and dirt in slaughterhouses, so black can make the clothes appear less dirty visually.

So these two types that suited my taste were not eliminated, and then I looked in many fabric stores, and finally found one that really suited my taste.

Although I don’t know what color and model the cloth is, it has an oily and dirty effect that looks great.

And the color is closer to that of human skin, although it doesn't have the glossiness of human skin, but I'll have thought it through by then.

As long as the cloth looks the same as shown in the picture, the glossiness issue can be easily solved. I just need to cover it with a layer of plastic wrap.

Although it sounds outrageous, it is indeed possible to appropriately show the gloss of human skin on the fabric.

I was very interested in this, so I checked the reviews of the fabric. I found that out of the twenty or thirty reviews, nearly half were negative.

Including but not limited to the goods not being what was described, the color of the fabric photographed and the fabric received are different, the fabric is extremely rotten, with a hole in it if you poke it, and the fabric is very roughly woven and easily rotten.

I was a little afraid to take pictures, and the fabric was indeed too cheap. As the saying goes, you get what you pay for.

Although it is possible to be deceived, cheap does not mean good, and the goods are relatively poor in most cases. Moreover, it is not easy to see that nearly half of the more than 20 reviews are negative.

So I think there must be something wrong with this product, and the fabric is rotten as soon as it comes out, and it is very easy to break.

According to my personal understanding, they should be old fabrics that have been stored for a very long time.

Because everyone buys ready-made clothes now, few people buy fabrics, and basically not many people make their own clothes, so the fabrics in many small fabric factories or personal fabric stores are often piled up for a long time and cannot be sold.

But if those fabrics are thrown away, they still cannot be sold even if they are stored in a new warehouse, so some fabrics can be piled up for several years or even more than ten years.

Then it is exposed to wind, sun, darkness and humidity, and after repeated exposure to this, the fabric eventually becomes very brittle, just like it has been weathered.

In the end, it will become the kind that will have a hole if poked and will break if pinched.

Many experienced, older generation clothing makers or tailors, when they choose fabrics, will also use this to test whether the fabric is good or new.

Because the new fabric is very elastic, it will not be able to be poked or kneaded. But if it is old fabric, it will lose some of its elasticity. If you poke it with your fingers, or knead it, it will lose its shape.

This is one way to identify the fabric of clothes. Judging from the situation described in the comments below, the fabric must have been stored for a long time, which means that the fabric has not been sold for a long time.

Although fewer people are buying materials now, and fewer people are using that kind of fabric, people would generally give bad reviews in this situation.

As long as the fabric is well preserved, this situation will not occur within three to five years.

If it wants to become something that breaks with a poke or shatters with a touch, it must have either been poorly stored or not carefully preserved over the past 35 years.

The wind, sun, rain and humidity, coming and going, quickly destroyed the fabric structure.

Or the fabric is at least 10 years old. Only in this way can the fabric become like this. In either of these two situations, I dare not buy fabric from this store.

First, if he did not take good care of the cloth, it proved that he did not care about his goods at all.

If a merchant cannot take good care of his own goods, even if the goods appear to be fine when I buy them, I would still worry that problems will arise after a while.

After all, some things are invisible to the naked eye, and they may become moldy or something after a while.

You say it is the merchant's responsibility, but time has passed. You say it is not the merchant's responsibility, but it is impossible for a normal piece of cloth to become moldy and broken shortly after purchase.

If it is the second case, then I would be even more worried, although the fabric is damaged, usually in large quantities, and replacing it will definitely result in a loss of money.

But these fabrics have been stored for about 10 years, so they are useless no matter how you think about it, so just throw them away. But if you still keep them and sell them to customers, isn't that destroying your own reputation?

So no matter which of these two situations occurs, I dare not buy his fabrics, even if I really like the fabrics and it really meets my requirements.

Then I eliminated the fabrics from this store, but I couldn't find the right fabrics from other stores either. The main reason was the color. Normal clothing fabrics didn't have flesh-colored or skin-colored fabrics.

Even the dye can't be found in the dye, otherwise you can buy a piece of white cloth and dye it yourself.

Currently, the only flesh-colored and skin-colored fabrics are those used to make stockings, muscle clothes, or flesh-colored base layers.

Only these types are close to the color of human skin, but this type of material is particularly easy to tear. As for muscle clothes, the material is quite special and cannot be sewn by ordinary sewing machines or people like me with poor skills.

The fabric of stockings and undershirts is easy to tear and burn.

Although there is unlikely to be an open flame at a comic convention, I still think that I should not choose that kind of fabric, as it would be embarrassing if the clothes were torn at the event, as I might move around a lot.

After all, I want the cloth to make an apron. Although the triangle head has no leg movements, all the martial arts and action movements are basically concentrated in the upper body.

However, if you use fabric like stockings or base layers, it will easily be torn even when you walk.

I don't want to show my butt in public, even if I have underwear underneath.

Moreover, the material of stockings can be said to be torn by any slight touch, and it has no anti-friction ability at all. I will wear a helmet on my head and hold a knife in my hand. I also plan to make another doll.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like