Reborn in 2011, 985 missing from two copies

Chapter 445: North-South diversion strategy, acquisition of ASE packaging and testing plant!

When the land was acquired, the floor price was 2.5 yuan per square meter and 3.4 yuan per square meter. Adding several thousand yuan in construction costs and marketing costs, the total investment in the four projects will exceed 200 billion yuan.

The prime location in Lujiazui will be put on sale in 2017-2018, and when it is developed into a high-end improved large flat, the price will be 12 to 16 yuan per square meter.

With a total investment of more than 200 billion, it is no problem to make a profit of more than 1200 billion.

Net profit is as high as 100 billion!

It can be said that the hundreds of billions of profits from these four plots of land alone are enough to cover the total expenditure of a large 10-inch wafer factory with a production capacity of 12 pieces in three months, as well as the total expenditure of R&D of 28-nanometer process!

In recent years, prices have not risen excessively and the currency has remained relatively stable.

28 billion is enough to build a large-scale wafer factory with a capacity of 300 nanometers and a monthly output of wafers.

But in a few years, building a large-scale wafer factory with a 10-nanometer capacity and a monthly output of wafers will cost billion or even more.

Similarly, a few billion RMB is enough to develop 28-nanometer technology at present.

But in a few years, the research and development of 10-nanometer technology will cost tens of billions.

If we develop 7-nanometer technology, the difficulty will increase several times, and the research and development costs will also increase several times.

Similarly, 7 nanometers requires multiple exposure technology, and the number of DUV lithography machines required will also increase several times.

By then, both the cost of building a wafer fab and the cost of producing 7-nanometer chips will skyrocket several times.

There is nothing we can do about this.

As for the price reduction of lithography machines?

Don't even think about such a good thing.

In a monopoly industry, there is no such thing as price reduction.

It's a one-sided seller's market, so you have to buy even if the price goes up.

Unless domestically produced DUV lithography machines are developed and completely replaced, lithography machines will become very cheap.

For example, before the domestic breakthrough of MRI machines, giants such as Siemens monopolized the market and sold one for 3200 million yuan.

After the domestic breakthrough, the price of MRI machine directly reached 290 million!

Similarly, the current DUV lithography machine cost ASML 3.5 million yuan per unit before it was domestically produced. Once it is fully domestically produced and the technology is equal, the price can be reduced to less than 1 million yuan through mass production!

The profits from the four plots of land in Shanghai could earn over 100 billion yuan, and Wang Yi couldn't help but feel in a good mood.

"Mr. Wang, you have gained a lot from this trip to Shanghai. Why don't you stay in Shanghai for a few more days?" Mr. Zhou said with a smile.

Wang Yi nodded: "Yes, I plan to go to ASE's packaging and testing factory to see if I can acquire it."

"You want to acquire a packaging and testing factory!" Mr. Zhou instantly understood Wang Yi's idea.

"That's right. We have two wafer fabs in Shanghai, so we naturally have to acquire a packaging and testing plant. This way, we can provide a one-stop solution for chip mass production and chip packaging and testing."

According to Wang Yi's plan, mobile phone factories/foundries, wafer fabs, and packaging and testing plants will be divided into north and south.

At present, the second phase of the Xingyi mobile phone J1 super factory in Jeju has been fully delivered and is in trial production.

It will be fully operational by the end of the month, and the annual production capacity will increase from the originally planned 16 million units with 5000 hours of non-stop production to 24 million units with 7500 hours of non-stop production.

The Xingyi factory in the imperial capital has also increased its annual production capacity from 16 million with 3000-hour non-stop production to 24 million with 4500-hour non-stop production.

Starting next month, Xingyi mobile phone's annual production capacity will reach 1.2 million, and monthly production capacity will reach million.

Such a terrifying production capacity can basically cover the sales of the Xphone 2 Kunpeng version.

After Double Eleven, the monthly sales volume of Xphone 2 in China will drop to around million, or even below million.

Including parallel imports sold overseas, monthly sales are estimated to be around 1200 million.

After all, the Double Eleven promotion can create sales records, but it will also consume a lot of potential purchasing power.

In addition, since the xphone 2 has passed its golden selling period of the first three months, its subsequent sales volume has naturally declined a bit.

In this way, Xingyi Technology's own factory is sufficient to produce 2 million Kunpeng version xphone s.

If we add another 200 million Qualcomm versions of xphone 2 manufactured by BYD, that would add up to 1200 million xphone 2s a month, which is more than enough to sell.

As for the J2 Super Factory of Xingyi Mobile Phones in Jeju, it is still under construction and will be delivered in two phases in the middle and second half of next year.

Before delivery from the J2 Super Factory, the Kunpeng version of Xphone 2 was produced by the Jeju J1 Super Factory and the Capital Factory.

The xphone 1, xphone 1 pro, and the borderless thousand-yuan phone are outsourced to BYD.

This achieves a north-south diversion.

Similarly, the wafer fab will also be divided into north and south.

The Xingyi B1 wafer factory in the capital mainly mass-produces Kunpeng 702.

月底B1晶圆厂的良品率有望达到95%,月产能超过1500万颗,能够生产1500万颗鲲鹏702。

The remaining 5% of inferior chips can be made into about 80 low-frequency Kunpeng 700s.

After these chips are produced, they will be sent to the Shanghai packaging and testing factory for packaging and testing at low cost and high efficiency via the Beijing-Shanghai high-speed rail.

After the packaging and testing is completed, the Kunpeng 702 chip is sent to Jeju J1 Super Mobile Phone Factory, Tablet Factory and the mobile phone factory in the capital via the Beijing-Shanghai Line for the production of Xphone 2 Kunpeng Edition and Xingyi Tablet X1 Ultra Edition.

The M1 wafer factory in Shanghai mainly produces the low-frequency Kunpeng 700, and can produce more than 1500 million Kunpeng 700s every month.

Kunpeng 700 is a castrated version of Kunpeng 702. During the R&D and design stage, the main frequency of the quad-core CPU was reduced from 1.7G to 1.3G, and the GPU was directly designed as a three-core.

Therefore, the production difficulty of Kunpeng 700 is much lower than that of Kunpeng 702, and the yield rate is naturally higher. As the proficiency increases, it is expected to exceed 97%.

As for Kunpeng 500, there was no research and development at all. It is simply Kunpeng 700 with the core locked and frequency reduced through an algorithm, and it is just renamed.

To put it bluntly, Kunpeng 500 and Kunpeng 700 are the same chip, only the algorithm has been castrated.

Of course, 3% of the Kunpeng 500s are truly defective and are manufactured using inferior chips from the Kunpeng 700. After all, they cannot be wasted.

The remaining more than 97% of Kunpeng 500 are actually Kunpeng 700, which just locks the core and reduces the frequency through algorithm.

The Kunpeng 1 produced by the M700 wafer factory will be sent to BYD's foundry after packaging and testing in Shanghai for the production of xphone 1, xphone 1pro, Xingyi tablet X1, and X1pro.

On the xphone 1 and Xingyi Tablet X1, an algorithm will be used to lock the core and reduce the frequency, and the chip will be renamed Kunpeng 500.

Of course, if you want to cut down a little, you can also change it to Kunpeng 506: quad-core CPU 1G main frequency, triple-core GPU slightly downclocked, used for xphone 1 and Xingyi Tablet X1.

Next year's borderless mobile phone will be a little more castrated and changed to Kunpeng 500: quad-core CPU 1G main frequency, dual-core GPU, used in the 999 borderless mobile phone.

In this way, the Wujie phone that starts at 999 yuan and the Xphone 1 that costs more than 1 yuan can be distinguished, and the Xphone will not be criticized for using the same chip as the thousand-yuan phone.

Compared with Kunpeng 506, Kunpeng 700 has better performance. The CPU and GPU are both downclocked by algorithms, which will not affect the sales of xphone 1pro and Xingyi Tablet X1 pro.

Anyway, they are all Kunpeng 700 chips, so it is easy to castrate the algorithm and change the name.

As for cracking the castration algorithm and achieving full performance?

The XOS system has changed the underlying architecture of Android and re-encoded it. If the other party can crack it, it will be considered a powerful one.

But there is a high probability that it will become a brick!

If there really is such a talent, Wang Yi will hire him with a high salary!

More importantly, the algorithm tuning and heat dissipation of the SOC chip are carried out according to the core and frequency of the SOC chip.

The Kunpeng 500 has low heat generation after core locking and frequency reduction, so the cooling module of the borderless mobile phone can be adjusted casually.

Once cracked, the performance of Kunpeng 700 is fully released, and the heat is severe. The cooling module of the borderless mobile phone can't bear it at all. When the phone overheats and triggers the core locking and frequency reduction mechanism, the performance of Kunpeng 500 will still be achieved.

It's purely unnecessary.

The same is true for Kunpeng 506. The cooling design of xphone 1 has no problem running Kunpeng 506, but if Kunpeng 700 is used, it is totally insufficient.

After all, the xphone 1 is a dual-core phone, and the original cooling module was also designed for Qualcomm dual-core. The quad-core Kunpeng 506 can still handle it after frequency reduction, but the Kunpeng 700 with full performance cannot handle it.

In this way, all the water is divided between north and south.

The new flagship is produced in-house, while the others are outsourced.

When the packaging and testing plant in the capital goes into production next year, the flagship chips produced in the capital will be packaged and tested directly in the capital, and then shipped directly to the factories in the capital and Jeju.

By then, from chip factories, to packaging and testing factories, to mobile phone factories, all will be diverted to the north and south!

This is Wang Yi’s overall plan.

After having lunch with Mr. Zhou, Wang Yi returned to the hotel in the afternoon and held a video conference with Song Sining.

"Looking at your current state, it seems that you have gained a lot from this trip to the Magic City." Song Sining said with a smile.

Wang Yi nodded: "Nine projects, eight have been finalized!"

"???"

"Nine projects?" Song Si Ning was confused:

"We acquired SMIC's Shanghai wafer fab, ASE's packaging and testing plant, and the Xingyi car project, so there should be at most three. How can there be nine?"

Wang Yi smiled and said: "We have completed the acquisition of SMIC's wafer fab, but its monthly production capacity is only 2.5 wafers. Shanghai has built us a large wafer fab with a monthly production capacity of wafers."

Song Sining: "..."

"In addition, a 300-acre industrial park has been planned in Lujiazui to serve as the headquarters of Xingyi Technology in Shanghai."

Song Sining: "..."

"Near the industrial park, I won four more residential land projects with a total construction area of ​​4 square meters. I spent 90 billion yuan, all at the reserve price."

Song Si Ning didn't know what to say: "..."

"We have also negotiated with Xingyi Automobile."

"So that's it." Song Si Ning suddenly realized: "Two wafer fabs, a Shanghai headquarters, a Xingyi Automobile, plus four residential projects, and the ASE packaging and testing project, that's nine in total!"

"Yes, the other eight projects have been signed. Now the only thing left is the acquisition of ASE's packaging and testing plant. Mr. Hu is pushing it forward here."

During this trip to Shanghai, Wang Yi's original plan was to acquire SMIC's Shanghai wafer factory and ASE's packaging and testing factory.

By the way, let’s see if the Xingyi car project can be promoted. If not, Wang Yi will change the city layout.

He wouldn't hang himself in one city.

Unexpectedly, not only did the Xingyi car project succeed, but we also added six more projects. It can only be said to be a pleasant surprise.

"The assistant is sorting out the information and will send you the contracts for these projects soon. You will have to keep an eye on the Shanghai headquarters afterwards." Wang Yi said.

"Okay, I'll take care of the Meiyou Technology matter and come over."

Song Si Ning knew that she would be living in the Magic City from now on.

Meiyu Technology in Jeju has already been on the right track, so it is enough to hand it over to Chen Chuanqing for management.

As Song Sining was the vice president of the group, it was natural that she would be responsible for such a major task as opening up the headquarters in Shanghai.

Especially in Shanghai, there are Xingyi Automobile, two wafer fabs and other projects. In terms of strategic significance, it has surpassed Jeju and is second only to the imperial capital.

It is only natural for Song Si Ning to take charge.

After all, Wang Yi has to return to the imperial capital and it is impossible for him to live in the Magic City forever.

Of course, Wang Yi has another consideration. Lin Shu is in the imperial capital, and Song Sining is in the magic city.

The king does not see the king.

Good.

"It's here. It's been sent!" Song Si Ning said, opening the email:

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like