Siheyuan: Inheriting the Bistro, Sister-in-law Xu Huizhen

Chapter 67: Give orders and increase production by 500 million tons.

After explaining Wang Gong's duties, Su Zhengping once again immersed himself in writing in his notebook!

"Tear!"

"Gong Li! You lead a team to the 6-10 workshop to repair the 6 broken machines. This is the repair method.

Whether you can repair these machines this afternoon depends on your basic skills!

Can it be done? "

When a level 9 engineer in the crowd heard Su Zhengping's words, he immediately stepped forward and took the paper from Su Zhengping's hand!

"Guaranteed to complete the mission!"

Then he immediately took the people out of the workshop!

......

"Wang Gong, take someone with you..."

"Guaranteed to complete the mission!"

......

"Plumber, take someone with you..."

"Guaranteed to complete the mission!"

As Su Zhengping issued orders one after another, engineers left the scene with dozens of technicians!

And Su Zhengping is like a general reviewing the soldiers,

All the soldiers waited for his review and then went out to kill the enemy!

All that's left is to wait for news of their triumphant return!

After most of the people in the technical section had left, Su Zhengping looked at the lonely forest worker in front of him.

Su Zhengping didn't say much, but continued to lower his head and write down the solution.

"Tear!"

"Lin Gong, a total of four faulty machines in these last few factories and workshops will be left to you!

Repair it according to the method I gave you! "

Su Zhengping looked at Lin Gong calmly and handed over the simple paper in his hand!

Lin Gong, on the other hand, had long been curious about what Su Zhengping had written on the paper.

Is it true that someone can repair dozens of machines with just these few lines?

So Lin Gong directly picked up the paper and read it carefully!

[1. Failure of the rolling mill in the 20th workshop: steel piled up at the head of the rolled piece when the frame bit into it, and there were defects such as delamination, inclusions or smelting waste inside the billet, causing the rolled piece to "split";]

[Solution: Check the blank carefully; check the rolling mill roll gap...]

[2. Failure of the cold rolling mill in the 21st workshop: the roll gap setting is incorrect; there are broken raw material inclusions;]

[Solution: Cut the head and tail of the flying shear to lengthen. Workers at the roughing and intermediate rolling stations carefully check whether there are any inclusions in the semi-finished materials at the #1 flying shear. If there are any inclusions, contact the #2 station. The #2 flying shear is broken;... ...]

【3. Workshop 21...】

【Solution:......】

【4. Workshop 22...】

【Solution:......】

......

Lin Gong only glanced at it for a few times, and then his right hand started to tremble slightly when he picked up the paper.

I was secretly shocked:

"These repair ideas are all wildly fanciful or even a professional like him would have no idea about them.

But there is always an intuition in my heart that this method is right! "

Lin Gong felt uncomfortable, so he turned around and left without even saying hello.

He was going to see if these methods worked.

After Lin Gong left, all the technical staff were sent out by Su Zhengping!

At this time, Su Zhengping looked at several level 8 and level 7 workers and said:

"Masters, take a rest. They will bring over the faulty parts in a while, and then it's time for you to contribute."

The great craftsmen were all very polite to Su Zhengping.

Even Yi Zhonghai showed a fake smile.

What a great move Su Zhengping missed just now!

Simply drawing a line fixed a machine!

This is amazing!

They have completely overturned Su Zhengping's previous idea of ​​being mysterious!

Even if Su Zhengping only repaired one machine this time, it would be a great achievement for the steel rolling mill.

So how dare they neglect it!

At this time, Director Yang’s face was also full of expectations!

It turned out that Su Zhengping thought it was a bit unrealistic to repair scrapped machines in such a big way.

But after seeing Su Zhengping's ability, he was secretly happy.

"This is something that even Mr. Liu can't do.

No wonder the previous leader of the Ministry of Industry said to me:

"Comrade Su Zhengping's technical level is tentatively designated as level 6 engineer, but it is no worse than the previous chief engineer of your steel rolling mill."

It turned out that everything he said was true! This is no worse than Mr. Liu!

This is too strong! "

"Go and move some chairs! Hurry up! I'm just going to sit here today and won't leave!"

Deputy Director Sun immediately arranged for several people to move a few chairs, and arranged for Director Yang and Su Zhengping to sit down and talk.

......

Wang Gong, who was the first to leave, had already inspected all 7 machines he had taken over!

There are 3 machines that take a long time to repair.

Parts of 2 units were broken and the old parts needed to be dismantled and brought back!

The last two machines, Wang Gong, took a serious look at Su Zhengping's repair methods.

I have never seen such a repair method before, but it seems that the location of the fault was determined at once.

I estimate that it only takes 30 minutes according to Su Zhengping's method to quickly repair these two machines!

"Everyone is working hard to conquer these four machines, and at the same time strive to repair these two machines within half an hour!"

Mr. Wang directly divided the more than 40 people into 4 groups and conquered the corresponding machines point-to-point.

Gong Wang personally stared at the two machines that could be repaired quickly.

At this time, everyone saw how amazing Su Zhengping was just now, and they had an inexplicable trust in Su Zhengping.

So I work extra hard.

Just over 20 minutes passed, and someone reported that the two machines had been repaired!

"Everyone get out of a safe distance!"

"Put the materials in!"

A huge piece of rolled steel was put into the bottom of the forging machine that was two stories high!

"Everyone stay back! 3/2/1, start!"

"Bang!"

I saw the two-story-high forging hammer falling directly and hitting the steel hard.

The steel has deformed visibly to the naked eye!

Then the forging hammer was lifted and dropped one after another!

"Bang!"

"Bang!"

"Bang!"

"Bang!"

......

Until the steel under the forging hammer reaches the predetermined value.

"Stop!"

"Check the steel!"

The workshop director held the caliper on the steel with trembling hands.

Keep your eyes glued to the caliper data.

Then he rubbed his eyes in disbelief!

My hands are shaking even more!

He spoke with difficulty:

"The product is qualified, the error is 0.03mm, which is within the normal range!"

Then, he sat down on the ground and cried!

"Uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu""

The technicians looked at each other in shock when they saw this!

Don't even know what's going on!

At this time, Wang Gong's eyes were also red. As the oldest engineer in the steel rolling mill,

Wang Gong naturally knows the significance of this machine!

Engineer Wang looked at the dozens of technicians and more than 100 onlookers and said:

“This machine has been imported by the country for 50 years, and it used to be the main rolling mill of the steel rolling mill.

The annual output exceeds 500 million tons.

Today, General Engineer Su repaired this machine, which means that the production capacity of our steel rolling mill will directly increase by 500 million tons in the future.

Everyone applauds Comrade Su Zhengping! "

In an instant, everyone in the workshop was excited.

My neck turned red with excitement, and I clapped vigorously with both hands.

People in this era are so simple. The contribution of the people, the output of the factory, and the strength of the motherland are all honors that everyone cares about.

This is Chapter 1, there are two more today!

Free gifts sprinkle little by little! Thumbs up! Thanks

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like