Warhammer Greenskin Inventor

A farce in the Broken Tooth Valley also made Lin Mu understand that the same thing may happen in every territory in the future. He must have a boy he can trust to guard him. If he wants to guard a territory, only orcs, Or goblins won't work. The orcs and goblins must cooperate. The goblins are responsible for production and construction, and the orcs are responsible for all violent matters. With a powerful orc and a cunning goblin, the new orcs will If they don't dare to cause trouble, the goblins can also keep an eye on the orcs, lest these orcs get into trouble and cause trouble for them.

For this reason, Lin Mu left a small team he brought, the Big Guards, in the Broken Tooth Valley to let these orcs maintain order and bring the new orcs back to the Iron Head Tribe for training.

The Iron Head Tribe once again fell into a busy development stage. With the blueprints drawn by Lin Mu, the goblins and chaos dwarves also built a series of steam machines one after another, which increased the output of the goblin factory by a large margin, which also led to The amount of iron produced by a blast furnace seems a bit insufficient. You must know that after the installation of steam engines in the mines, the output has skyrocketed. Now the goblins and ratmen use steam hammers to mine. One ratman mines as fast as Compared with the original dozen or so, a conveyor belt is installed in the mine, which saves the most labor-intensive ore transportation.

This has led to more and more iron ore being mined, and building a blast furnace has become an urgent need for the tribe. Unfortunately, Linmu can only allow half of it to be built. In the greenskin arena, the goblins built the blast furnace first, and this time they have to build one. The addition of two blast furnaces made the construction of the arena seem far away.

As the weather gradually turns colder, winter is imminent. The cold winter is a hurdle that many races in Warhammer cannot overcome. Even the greenskins will not move around in winter. They will try their best to find a place to escape. It is considered a warm place to wait until spring. Compared with the greenskins who can live in the sun, the situation of the people in the empire in the border princes is much worse. As the conflicts between the emperors in each territory are increasing day by day, the border Online frictions also occurred frequently. After a year of hard work, farmers had to hand over [-]% of their grain to the nobles, who would use it to raise private soldiers and sing songs every night.

As for the farmers who have handed over the grain, they can only take [-]% of the grain to feed their family. For this reason, they must try to avoid excessive exercise, because exercise will make them feel hungry, and they can only hide in small and dilapidated houses. Inside the house, I prayed that I could survive this winter.

The Iron Head tribe in Linmu is also preparing for the winter. The busy goblins cut and sewed pieces of cloth to make military coats, and then filled them with some scattered mushroom mycelium. Such military coats The coat is worn on the goblin, and the length of the coat can reach directly to the goblin's knees, which also saves the need to make cotton pants for the goblin.

The production of coats consumed the tribe's hard-earned fabric at a rapid rate. Unfortunately, Lin Mu could only ask the goblins to build two more textile workshops. The new textile workshops also used steam engines, which made the work far more efficient than the first. A textile workshop would at least allow each of the greenskins in the tribe to have a military coat before the severe cold came. As for the rat men, Lin Mu could only express his helplessness. The current tribe could not supply such a large number of rat men. They could be driven into the cave to avoid the cold, but the forest curtain prepared a large amount of hay for these rat people so that they did not have to lie on the hard ground when sleeping. For this reason, the nearby hills were bald by the little grunts.

After the Goblin Factory was equipped with a steam lathe, Lin Mu did not disappoint and successfully produced the Iron Head Tribe's first revolver. For this reason, Lin Mu rushed to the Goblin Factory that day to watch the test of the revolver. Shoot, the structure of the entire rifle can be said to be exactly the same as that of the revolver. It is just one size larger, with a longer barrel and a butt. The only advantage of this gun is its fast rate of fire.

The front-loading muskets used by the empire or the dwarves' lancers can only fire three to five rounds per minute, but the revolver in the hands of the goblins can indeed fire six rounds in ten seconds. All the lead bullets were fired and the reloading was completed within ten seconds. This was a complete cross-domain improvement. Of course, since black powder was still used, the common problem of gunpowder guns cannot be avoided, which is the large amount of smoke generated after firing. Blocking the line of sight. To avoid this problem, Lin Mu must make smokeless gunpowder. Smokeless gunpowder requires a large amount of chemical equipment, and people with chemical knowledge are obviously not available in the tribe now.

If you want to install this kind of revolver for goblins, you must also solve the problem of bullet manufacturing. You must know that whether it is dwarf or imperial gunpowder is packed in a gunpowder pot, a certain amount of gunpowder must be poured into the barrel first. , after wrapping the lead bullet with animal skin and pouring it into the barrel, finally pouring gunpowder into the gunpowder pool, pulling the trigger and using flint to ignite the gunpowder and eject the shotgun. All charging and firing are completed by soldiers.

The ammunition of the revolver is pre-installed. A certain amount of gunpowder must be wrapped with paper or cloth and lead bullets into cylindrical ammunition. The firing pin of the revolver strikes the bottom of the gunpowder, wipes out the sparks, and turns the gunpowder into cylindrical ammunition. When the lead bullet is ejected, the force of the gunpowder explosion will also push the firing pin back to its original position. The reset of the firing pin will drive the runner forward one space, and then the main firing pin will be blocked. Such an exquisite design made the Chaos Dwarf craftsmen who saw the drawings They are crazy about it.

The Chaos Dwarves once thought that Lin Mu had been favored by the God of Forging among their dwarf gods, and that was why he came up with such a complex and exquisite structure.

When the Chaos Dwarves were pestering Lin Mu to cut Lin Mu into slices for study, Lin Mu could only announce helplessly: "Gray dwarves, I am Brother Go, Brother Mao, the God of Choice, and your God of Forging is also very optimistic about it. Me, so you have to work hard for me, but I still have more powerful inventions that I haven’t come up with yet."

Although the revolver was very successful, the only trouble was the manufacturing of ammunition. It was impossible for Lin Mu to use cloth to make ammunition. It would be too wasteful, and the cloth was still too thick and prone to squibs. For this reason, the demand for papermaking is increasing. The bigger the forest was, the more the gnomes could only build a papermaking workshop. The entire papermaking workshop was divided into three steps. First, there was a huge pool, then there was a stepping stone, and there was a huge furnace.

In addition, Lin Mu also asked the goblins to dig a huge puddle outside the entire workshop, and also opened a ditch to divert the river water.

If you like it, please give it a good review.