I don't have a system but I have a hammer

However, cyanide is indeed one of the relatively rare chemical toxins that stick to death, and it does not need to be refrigerated like biological toxins, so it can be carried with you, as long as you pay attention to safety.

I smeared it on my sleeve arrows and made a special arrow case to protect myself!

Interestingly, through a plaster cast that the doctor put on my left arm, I was inspired to make myself two pairs of... arm braces!

The protective material of the arm guard is divided into four layers, the outermost layer is cut-resistant leather, the second layer is a custom-made mesh metal layer, the third layer is an impact protection pad, and the fourth layer is a thermostatic cotton plus Composite material of polyester!

Let’s talk about the experimental results. In terms of anti-puncture and anti-slashing effects, it can be said that it is completely beyond my imagination. When I stabbed with a knife with all my strength, I just punctured a little bit of the outer skin and then stagnated. Yes, if you slash vigorously, it does leave a deep mark, but you can't cut through the second layer at all, so you stop at the front!

Regarding the impact protection pad, although the effect is limited, it can indeed protect my fragile left arm to the greatest extent. Besides, it is better than my bare hands all the time, isn't it?

And when it took me a month to complete the arm guard, I suddenly had a wonderful idea..

Why don't I just make a suit?

So I customized two sets of black jumpsuit embryos made of composite materials, and then sewed a layer of cut-resistant leather and composite steel plates on the lower abdomen, chest, and back muscles, and installed ultra-thin anti-shock at the joints. Pads and anti-scratch pads, and finally attach the armguards to the suit and you're done!

Since the battle suits are all made of ultra-thin materials, not only will it not affect personal activities, but the overall appearance does not feel bloated. Put on a shirt and a coat, and no one will see that I am wearing a battle suit !

but...

The trend of thought has already begun, how can it stop here?

That's right, the battle suit only serves as the most basic protection, and I have to add various functions to it!

I fixed the sleeve arrow on the left arm guard, removed the tactical watch and installed it on the right arm guard, and then tied the elastic straps to the arm position. All the functional devices of the upper body are completed!

Then, I made a tactical belt, which took me nearly a month to make....

Because there are too many functions above!

First of all, there are four palm-length fruit thorns. In order to prevent myself from being stabbed, I installed them on the back of the left waist with a slope, which is also convenient for my left hand to use!

Secondly, I prepared 12 empty bottles of Fengyoujing and two soft bottles of Sanjin Oral Liquid. Ether, a bottle of benzodiazepines, three bottles of gunpowder, three bottles of gasoline, and three bottles of corrosive poison powder!

The role of sulfide is nothing more than poisoning, but its super toxicity, only need to pour a drop in a pot of soup, can make all the people who drink the soup bleed, and die of poison, so one bottle is enough !

Not much to say about ether and benzodiazepines, but about gunpowder...

You can see that the amount of gunpowder is actually not much, but if you add up to three bottles and find a small container, it is enough to destroy an electric box. At this time, the poisonous corrosion powder and gasoline will come in handy immediately!

And for these harmful things, I specially made 12 small interlayers around the front of the tactical belt for storage....

Finally, on the right back waist of the tactical belt, I installed two slip-buckle pockets, one with a bundle of 8-meter-long elastic ropes, which can be used not only to connect a hammer as a flyweight, but also to climb floors. Another placed a small electric shock baton.

The entire tactical belt is made by chain stitching, and the joint is designed with a snap button that fits my waistline. You only need to press the snap button in the middle, and you can take it off at any time. It is very convenient. At the same time, the front end The position can also be torn directly from it to become a whip weapon about two meters long!

Alright, then there's the lower body part.

The calf guard is made of the same material as the arm guard, but its function is different. Inside the inner interlayer of the leg guard, there is a coil of flexible steel wire with a length of nearly 20 meters. In addition to increasing the defense of the leg, it can also be taken out at any time to make traps .

The leg guards on the thighs are made of eight mesh metal layers, mainly for the convenience of movement, otherwise the muscles will be restricted by the leg guards when they stretch and stretch, which will easily affect the acceleration at the start or the explosive power when kicking!

I specially widened and lengthened the pocket on the outside of the right leg. The purpose is to make Mr. Hammer have a very comfortable living environment. In the pocket on the outside of the left leg, I put three fruit thorns and waterproof matches....

In this way, this battle suit was completely transformed by me into one, which can hurt people at a distance, defend yourself at close range, travel at home, and survive in the wild. It is a must-have first-choice killing equipment!

Of course, I am full of sense of ceremony, so I definitely cannot miss this important moment of getting a new partner, so I named it on the spot... Hardware Battlesuit!

Then, I contacted the manufacturer of the tactical backpack, hoping they could help me make a tactical backpack with a height of 80 cm and a width of [-] cm, as well as some special snap buttons and inner bag designs. I also put forward some ideas of my own. ..

For example, I left a half-finger-width zipper outer pocket at the bottom of the backpack, installed two waist buckle straps on the left and right sides, replaced the leather liner on the back with an ultra-thin steel plate, and reserved a shoulder strap on the left and right sides. Interlayer and fixed buckle...

Under the temptation of a lot of money, the manufacturer readily accepted it, and it was sent to me in less than a month...

As soon as I got the tactical backpack, I couldn't wait to open it and check it out. The manufacturer made it very carefully, and almost all of them were made according to my requirements, which made me very satisfied!

Regarding the various design concepts of tactical backpacks, I actually think so...

The reason why the size of the backpack was changed to this size is to store the navy knife!

The bottom of the backpack is designed to place small smoke bombs, poisonous mist bombs, and oil mist bombs made by yourself!

The live buckle straps on both sides are designed to fit my body better and facilitate my own activities!

The steel plate on the back is nothing more than that it can be used as a bulletproof steel plate when necessary!

The fixed buckle of the shoulder strap is used to install the strong light device, which is very effective in close range attack!

And the start button of the remote control of the strong light device is installed on the handle of the hammer brother, and the strong light irradiation function can be turned on immediately by pressing the thumb, which is very convenient!

.