Super recycling earning system

"Brother Qin came so early, haven't you had breakfast yet? Come with me to the office to have some?" Tan Jiuxiao said with a smile.

"Okay, go to the office with Brother Tan for a meeting."

While talking, Qin Hao and Tan Jiuxiao came to the chairman's office, and the rest of Haoyun Internet's middle management came to the press conference venue early.

At this time, a large device covered by a red cloth was placed on the rostrum of the venue, and the staff was busy non-stop, and journalists kept entering the venue.

When I came to the chairman's office, there were some breakfasts in the reception area. There were ten kinds of dumplings, eggs, vegetables, and fruits. Seeing that the chairman and Mr. Qin came in together, Tan Jiuxiao's secretary prepared a pair of bowls Put the chopsticks respectfully in front of Qin Hao.

Tan Jiuxiao asked Qin Hao to sit down, then looked at the breakfast on the table, and said happily: "Oh, not bad, I didn't expect there is a leek box today..."

The chairman's secretary at the side said softly: "I know the chairman will come early today, so the cafeteria specially prepared it."

Tan Jiuxiao nodded in satisfaction, and then said to Qin Hao: "Brother Qin, come and have a taste, how about trying the craftsmanship of the master chef in the canteen of Yunxiao Heavy Industry."

Qin Hao smiled and picked up a leek box and tasted it, nodded approvingly and said, "Well, it tastes good, Brother Tan, the master chef in the cafeteria, can do it well."

"Hahaha, right? In fact, I have always had this idea. Don't look at a small cafeteria. It plays a vital role in the operation of the company. If the employees here can't eat well If you don’t have enough food, how can you have the energy and energy to work. Think about it, after the employees get off work, everyone gathers in the cafeteria, eats delicious meals, chats about work and life, and is as warm and happy as home. This is a veritable "home for employees ', a canteen can not only solve the problem of employees eating, but also provide a platform for everyone to communicate, promote the relationship between colleagues, enhance the cohesion of the unit, and the employees will be more motivated to work."

"Brother Tan is right. We need to learn from Brother Tan for the experience of enterprise management."

"Hey~ What kind of experience is this? I just figured it out when I was a soldier in my early years."

Time passed by one minute and one second, and at 10:[-], the secretary of the chairman came to Tan Jiuxiao and said softly, "Chairman, the press conference will start in [-] minutes."

Tan Jiuxiao looked at the time and said to Qin Hao, "Brother Qin, let's go."

Then Qin Hao and Tan Jiuxiao, led by the secretary of the chairman, came to the venue of the press conference. The leader's seat was on the rostrum, and Qin Hao's nameplate was arranged to the left of Chairman Tan Jiuxiao, followed by Yunxiao Heavy Industry's. There are about nine people including the president, the dean of the research institute, and the chief scientist.Seeing this position, Qin Hao hesitated. After all, according to the Chinese habit: the center is the largest, and the left is the respect (the left is the top, and the right is the bottom). He just provided some information and sat on the left of Tan Jiuxiao , so he hesitated and said to Tan Jiuxiao: "Brother Tan, this time is not very good."

Tan Jiuxiao said with a smile: "Hey~ Brother Qin, you are welcome. If it weren't for you, our press conference would not have been completed so quickly. You can sit in peace."

Soon the press conference began, and a tall and outstanding host came to the stage and said: "Respected leaders, ladies and gentlemen, dear friends from the press, good morning everyone!" Then he paused and gave everyone A clap time.

The host continued: "Welcome to the site of Yunxiao Heavy Industry's new product launch conference. I am the host Lin Wanru. It is a great honor to be the host of this press conference. I am very grateful to the group for giving me such an opportunity to share Yunxiao with everyone. This is a feast of new products in heavy industry. On behalf of all my colleagues in Yunxiao Heavy Industry, please allow me to express my most sincere thanks to all of you for participating in this meeting in spite of your busy schedule. First of all, let me introduce the leaders and guests who attended today's conference. They They are: Chairman of Yunxiao Heavy Industry - Tan Jiuxiao, Chairman of Haotian Technology - Qin Hao, Chief Scientist of Yunxiao Heavy Industry Research Institute - Zhang Shujun..." After the introduction of the nine people, the host continued: "Then please invite us Chairman of Yunxiao Heavy Industry - Tan Jiuxiao delivered a speech for the new product launch." Then there was a burst of warm applause.

Tan Jiuxiao said calmly: "I am very happy to hold this new product launch conference today. Everyone should be very curious about what products are released at this new product launch conference. As we all know, domestic CNC systems are of great importance to national defense security and economic security. Strategic significance, but due to the long-term blockade and restrictions of western developed countries, it has always been highly concerned by national leaders and industry experts. We, Yunxiao Heavy Industry, have devoted ourselves to research and development for many years, and have repeatedly failed. We have always adhered to the road of independent innovation and constantly made breakthroughs in foreign technologies Blockade, finally successfully developed Yunxiao Heavy Industry's first-generation CNC system and first-generation programmable logic controller with independent intellectual property rights recently, and successfully broke through the technical barriers of five-axis linkage, and recently obtained 24 national technical patents. Focusing on the development of CNC systems, Yunxiao Heavy Industry has overcome key core technologies such as multi-axis linkage, high-speed and high-precision, field bus, and open platforms, comprehensively narrowing the gap with foreign countries, and realizing the transformation of China's CNC systems from "analog type, pulse type", The leapfrog development to the "bus-type, all-digital" high-end CNC system. Presumably everyone has noticed that the equipment on my left. Yes, this equipment is the focus of this conference. It is equipped with Yunxiao Heavy Industry A five-axis machining center with a first-generation CNC system, a first-generation programmable logic controller, and a self-developed servo control system.” Then Tan Jiuxiao lifted the red cloth on the equipment, and a silver-gray five-axis linkage CNC machining center with metallic luster shone Appear in front of everyone.

The cameraman pointed his guns and short cannons at the device to shoot, and Tan Jiuxiao continued: "Then, we will invite Zhang Shujun, the chief scientist of our Yunxiao Heavy Industry Research Institute, to explain the specific details of the product to you."

Then the chief scientist - Zhang Shujun explained the new product for an hour, during which he also answered many questions from media reporters, such as: technical differences with foreign machines of the same type, machining accuracy, machining efficiency, stability... ....

Afterwards, Tan Jiuxiao added: "The new product will be first used in the machining workshop of Yunxiao Heavy Industry, and is expected to be mass-produced in February next year, and will be widely used in industries and fields such as automobile manufacturing, rail transit, aerospace, molds, and machinery. "

Two hours later, the new product launch conference was finally over. Because the whole process of the new product launch conference was broadcast live, the news that Yunxiao Heavy Industry broke through the foreign technology blockade was quickly reported by many domestic and foreign media.Of course, the stock market must be the first to be affected. With the launch of the new product launch, the stock price of Yunxiao Heavy Industry has also shown an unprecedented upward trend. As of the close of the morning, Yunxiao Heavy Industry has risen by [-]%.

Qin Hao and Tan Jiuxiao came to the chairman's office. The chairman's secretary had prepared lunch. Qin Hao looked at it. Compared with breakfast, the lunch was richer and more delicate.

At this time, the chairman's secretary came to Tan Jiuxiao to report: "Chairman, before the A-share market closed in the morning, our group's share price has risen by [-]%, and it is expected that the market will open in the afternoon. "

Tan Jiuxiao nodded, and said calmly: "Okay, I see, you can go to work."

Qin Hao said with a smile: "Brother Tan, once your new product launch is held, it is estimated that many forces at home and abroad will follow you. Brother Tan, you have to be careful."

"Hahaha, I, Tan Jiuxiao, have never seen such a big storm. Brother Qin, just watch, soon there will be actions in the beautiful country and Europe. These capitalists just can't see our rise in China."

Sure enough, the news that Yunxiao Heavy Industry broke through the technical blockade and successfully developed the CNC system, PLC and five-axis linkage machining center with independent intellectual property rights reached the ears of Leo, the managing director of Siemens Electric Greater China, and Leo urgently made an appointment with the headquarters Report, and said that he will get in touch with Yunxiao Heavy Industry as soon as possible, and try to get more technical details.

In addition, Yokoyama Motohiko, the president of the Japan Machine Tool Industry Association, was also extremely furious, and shouted in the office: "This is impossible, absolutely impossible. How could Huaguo break through the technical barrier of five-axis linkage in such a short time? They also developed their own numerical control system and plc, I don’t believe it, it’s absolutely impossible. They are definitely copycats, send someone to check for me, we must find out who leaked the technology to the Chinese.”

"Chairman Hengshan, calm down. After all, since the signing of the Wassenaar Agreement in 96, Huaguo has been working hard to develop their own CNC system. It has been more than 20 years now, and it is normal for the development to be successful." A graceful island woman said calmly.

"No, Ito, you don't understand what Huaguo's breaking through this technical barrier means to us! Our island country has an absolute dominance in the field of CNC machine tools, accounting for 40.00% of the CNC machine tool market in Huaguo. The country earns more than 200 billion US dollars, especially the five-axis machining center occupies 80.00% of the market share in the field of high-end CNC machine tools."

"That said, if Huaguo really has its own CNC system and five-axis machining center, wouldn't our CNC machine tool industry have to suffer huge losses?"

Chairman Hengshan said while pacing in the office: "Ito, you hurry up and contact other people in the association. We must hold a meeting immediately to discuss the next step."

"Okay, President Hengshan, I'll do it now."