My system is not decent
Chapter 733 What will be the effect
The sound is really different, as for the sound is better than the singing bowl made by others, he really can't tell.
There was no other way, Chen Wenzhe had no choice but to make a big move, to be a bell.
There are many clay molds for small bells, and there is no shortage of copper water on site. In this case, continue casting!
Anyway, if it's an experiment, Chen Wenzhe can focus on it and toss it hard.
Of course, when he was making the copper bells, he remembered that he had made some copper pipes just now.
These strings are wind chimes.
Sanded, pierced and hung up, when the wind blows, jingle!Jingle...
"It sounds really good!"
"It's just that the speed of tapping is too slow!"
"The wind is too low?"
"No, the copper pipes we made are too thick, they are too heavy for the wind to move!"
"Why don't we just make a small bronze bell, let's ring it ourselves, don't we know if it sounds good or not?"
"Yes, the voice is loud, whether it sounds good or not, it's easy to confirm!"
"Then do it!" Chen Wenzhe also found out at this time that he made a low-level mistake, thinking about casting copper pipes?
How thick is the wall of the casted thing like this?
It is better to make a bell than to make a clock, which is faster to do than to make a clock.
Therefore, when preparing to make a slightly larger clock, Chen Wenzhe first made a lot of bells.
This time, it was good or bad.
The sound of the bell needs to be crisp, so it is all the sound of jingle bells.
And the sound of the bell needs to be vigorous, that is, the sound of a ding-dong.
When did you wait until there was only one sound: Boom...that would be considered a success.
So, this time, a bronze bell with a height of half a person made a thumping sound.
The voice was low, thick, and continuous.
There was a knock, but the sound kept lingering in my ears. This is the overtone of metal, which is particularly thick.
This is the lingering sound, right?Can't say Xianle, but listening to it is really shocking!
Looking at the big clock in front of him, Chen Wenzhe felt very satisfied, because it already had that meaning.
He is just the simplest one-piece casting. If there are still 32 stalactites, and the sound is constantly adjusted, what will be the final effect?
It is definitely not easy to imitate Jingyun Bell, not to mention the characters on it, that is the best imitation, as long as it is the animal pattern on it.
What Chen Wenzhe can say casually includes flying dragon, flying phoenix, fairy crane, one-horned ox, Zoushi and so on.
And each of these images is unique and needs to be carefully crafted.
Of course, before engraving, the clay model needs to be specially made, otherwise, these unique beasts will not be formed on the clock face at all.
There are five sections in total, 26 pieces of clay molds. If it is a little dry, it needs to be trimmed one by one until it is completely qualified.
On this day, all the preparatory work was finally completed, and the formal casting could begin only after the mud was completely dry.
"Boss, we have finished the wooden model!"
While Chen Wenzhe was admiring the clay models he made, a worker came to report.
"Wooden model? Arhat wooden model?" Chen Wenzhe was taken aback for a moment, then remembered.
Recently, he has been doing quite a lot of work. While making various musical instruments, he can also make whatever he thinks of, such as some copperware!
It's fine if it's too complicated, but some copper pots, copper bowls, etc. really need to be made in batches. These things are also very good as daily necessities.
Apart from these things, that is Eighteen Arhats!
The wooden molds made by the workers are definitely unqualified, and Chen Wenzhe still needs to do the final modification.
The wooden molds made of wood are statues of arhats taller than people.
Coupled with various actions, the volume of each one is really not small, so these wooden models are not integrated, but spliced out.
After splicing and polishing, it is carved on it.
Now only the general shape has been cut out, and Chen Wenzhe still needs to do Jingdiao.
Chen Wenzhe's wood carving skills are not bad at all. Of course, most of this skills come from the inheritance of stone carving and jade carving skills.
For carving, he is no weaker than making porcelain.
Therefore, Carving Eighteen Arhats was just a waste of his time, and it was not difficult for him.
When the eighteen wooden statues are completed, the most important thing is to deal with their eyes.
This is different from porcelain sculptures, which cannot be finished with colored materials, so Chen Wenzhe can only do special treatment.
Fortunately, his craftsmanship has been improving as a whole recently, otherwise, his finishing touch technique would really be useless here.
After all, casting bronze statues and painting and glazing are completely different things, and they are also different from painting.
However, it makes sense, this is a disguised expression.
The most difficult thing to deal with the eyes of the characters is actually the blue and white, because you need to pay attention to the blurring.
After the problem of blue and white halos can be controlled, this problem will be relatively simple.
On the bronze statue, Chen Wenzhe needs to do detailed processing. After the bronze statue is cast, it will be carefully polished to make some subtle points reflect light. In this way, it may be able to form a special effect that porcelain does not have.
After all, the eyes are supposed to reflect light, and there is this vitreous body inside.
Metal naturally has luster, as long as it is handled well, the eyes of bronze statues can not only be vivid, but can even form a radiant effect.
And to achieve the effect in Chen Wenzhe's design, advanced polishing techniques must be used, and Chen Wenzhe is not worried about this at all, because when he inherited the firing of gold bricks, he also accidentally obtained another unique skill- - Grinding!
Pull out the list of skills and look at the column of unique skills: phantom carving, Yingying Baoguang, mirror grinding, erythema and patina, bronze, finishing touch;
There are six types in total, among which the phantom sculpture should be the most useful here.
Because the phantom sculpture technology is the use of visual deception.
The second is Yingying Baoguang, mirror grinding, bronzer and finishing touch, all of which can be used here.
Even erythema patina can be used if it is going to be aged.
Yingying Baoguang is actually a treatment for the surface of utensils, and to achieve this effect, mirror grinding is essential.
Other bronzers and finishing touches, needless to say.
These unique skills have reached the current level, Chen Wenzhe can use all of them, and they are still used in conjunction with each other.
In this way, it is convenient for him, no matter what he does, he feels very handy.
After making the wooden formwork, the next step is to use the foundry process to start pouring.
At this time, Chen Wenzhe stopped for another day.
He thought, is it possible to go further?
Therefore, he made [-] small wooden molds again, and used the sand-foundation technique to cast [-] bronze statues of Arhats the size of palms.
This time, he wanted to give full play to his carving skills, especially the phantom carving skills.
Therefore, after the pouring of the copper water is completed, using the experience of those old workers, the mold is quickly opened after a short period of solidification.
The timing was very accurate. After the mold was opened, the bronze statue solidified slightly, but not completely solidified.
The bronze statue was still very hot at this time, but Chen Wenzhe still wore thick heat-insulating gloves and a carving knife, and quickly carved on the face of an arhat.
There was no other way, Chen Wenzhe had no choice but to make a big move, to be a bell.
There are many clay molds for small bells, and there is no shortage of copper water on site. In this case, continue casting!
Anyway, if it's an experiment, Chen Wenzhe can focus on it and toss it hard.
Of course, when he was making the copper bells, he remembered that he had made some copper pipes just now.
These strings are wind chimes.
Sanded, pierced and hung up, when the wind blows, jingle!Jingle...
"It sounds really good!"
"It's just that the speed of tapping is too slow!"
"The wind is too low?"
"No, the copper pipes we made are too thick, they are too heavy for the wind to move!"
"Why don't we just make a small bronze bell, let's ring it ourselves, don't we know if it sounds good or not?"
"Yes, the voice is loud, whether it sounds good or not, it's easy to confirm!"
"Then do it!" Chen Wenzhe also found out at this time that he made a low-level mistake, thinking about casting copper pipes?
How thick is the wall of the casted thing like this?
It is better to make a bell than to make a clock, which is faster to do than to make a clock.
Therefore, when preparing to make a slightly larger clock, Chen Wenzhe first made a lot of bells.
This time, it was good or bad.
The sound of the bell needs to be crisp, so it is all the sound of jingle bells.
And the sound of the bell needs to be vigorous, that is, the sound of a ding-dong.
When did you wait until there was only one sound: Boom...that would be considered a success.
So, this time, a bronze bell with a height of half a person made a thumping sound.
The voice was low, thick, and continuous.
There was a knock, but the sound kept lingering in my ears. This is the overtone of metal, which is particularly thick.
This is the lingering sound, right?Can't say Xianle, but listening to it is really shocking!
Looking at the big clock in front of him, Chen Wenzhe felt very satisfied, because it already had that meaning.
He is just the simplest one-piece casting. If there are still 32 stalactites, and the sound is constantly adjusted, what will be the final effect?
It is definitely not easy to imitate Jingyun Bell, not to mention the characters on it, that is the best imitation, as long as it is the animal pattern on it.
What Chen Wenzhe can say casually includes flying dragon, flying phoenix, fairy crane, one-horned ox, Zoushi and so on.
And each of these images is unique and needs to be carefully crafted.
Of course, before engraving, the clay model needs to be specially made, otherwise, these unique beasts will not be formed on the clock face at all.
There are five sections in total, 26 pieces of clay molds. If it is a little dry, it needs to be trimmed one by one until it is completely qualified.
On this day, all the preparatory work was finally completed, and the formal casting could begin only after the mud was completely dry.
"Boss, we have finished the wooden model!"
While Chen Wenzhe was admiring the clay models he made, a worker came to report.
"Wooden model? Arhat wooden model?" Chen Wenzhe was taken aback for a moment, then remembered.
Recently, he has been doing quite a lot of work. While making various musical instruments, he can also make whatever he thinks of, such as some copperware!
It's fine if it's too complicated, but some copper pots, copper bowls, etc. really need to be made in batches. These things are also very good as daily necessities.
Apart from these things, that is Eighteen Arhats!
The wooden molds made by the workers are definitely unqualified, and Chen Wenzhe still needs to do the final modification.
The wooden molds made of wood are statues of arhats taller than people.
Coupled with various actions, the volume of each one is really not small, so these wooden models are not integrated, but spliced out.
After splicing and polishing, it is carved on it.
Now only the general shape has been cut out, and Chen Wenzhe still needs to do Jingdiao.
Chen Wenzhe's wood carving skills are not bad at all. Of course, most of this skills come from the inheritance of stone carving and jade carving skills.
For carving, he is no weaker than making porcelain.
Therefore, Carving Eighteen Arhats was just a waste of his time, and it was not difficult for him.
When the eighteen wooden statues are completed, the most important thing is to deal with their eyes.
This is different from porcelain sculptures, which cannot be finished with colored materials, so Chen Wenzhe can only do special treatment.
Fortunately, his craftsmanship has been improving as a whole recently, otherwise, his finishing touch technique would really be useless here.
After all, casting bronze statues and painting and glazing are completely different things, and they are also different from painting.
However, it makes sense, this is a disguised expression.
The most difficult thing to deal with the eyes of the characters is actually the blue and white, because you need to pay attention to the blurring.
After the problem of blue and white halos can be controlled, this problem will be relatively simple.
On the bronze statue, Chen Wenzhe needs to do detailed processing. After the bronze statue is cast, it will be carefully polished to make some subtle points reflect light. In this way, it may be able to form a special effect that porcelain does not have.
After all, the eyes are supposed to reflect light, and there is this vitreous body inside.
Metal naturally has luster, as long as it is handled well, the eyes of bronze statues can not only be vivid, but can even form a radiant effect.
And to achieve the effect in Chen Wenzhe's design, advanced polishing techniques must be used, and Chen Wenzhe is not worried about this at all, because when he inherited the firing of gold bricks, he also accidentally obtained another unique skill- - Grinding!
Pull out the list of skills and look at the column of unique skills: phantom carving, Yingying Baoguang, mirror grinding, erythema and patina, bronze, finishing touch;
There are six types in total, among which the phantom sculpture should be the most useful here.
Because the phantom sculpture technology is the use of visual deception.
The second is Yingying Baoguang, mirror grinding, bronzer and finishing touch, all of which can be used here.
Even erythema patina can be used if it is going to be aged.
Yingying Baoguang is actually a treatment for the surface of utensils, and to achieve this effect, mirror grinding is essential.
Other bronzers and finishing touches, needless to say.
These unique skills have reached the current level, Chen Wenzhe can use all of them, and they are still used in conjunction with each other.
In this way, it is convenient for him, no matter what he does, he feels very handy.
After making the wooden formwork, the next step is to use the foundry process to start pouring.
At this time, Chen Wenzhe stopped for another day.
He thought, is it possible to go further?
Therefore, he made [-] small wooden molds again, and used the sand-foundation technique to cast [-] bronze statues of Arhats the size of palms.
This time, he wanted to give full play to his carving skills, especially the phantom carving skills.
Therefore, after the pouring of the copper water is completed, using the experience of those old workers, the mold is quickly opened after a short period of solidification.
The timing was very accurate. After the mold was opened, the bronze statue solidified slightly, but not completely solidified.
The bronze statue was still very hot at this time, but Chen Wenzhe still wore thick heat-insulating gloves and a carving knife, and quickly carved on the face of an arhat.
You'll Also Like
-
I, Kamen Rider of Zetsu Zero
Chapter 100 1 days ago -
Doomsday Game: I become stronger by staying at home!
Chapter 306 1 days ago -
Kamen Rider Infinite Journey
Chapter 283 1 days ago -
Can life span be exchanged for treasure? I am invincible with infinite life span
Chapter 140 1 days ago -
The wealthy entrepreneur: I want to support millions of employees!
Chapter 431 1 days ago -
Start with an invincible Immortal Emperor and create the first sect in the world
Chapter 202 1 days ago -
Sign in as the emperor at the beginning and build an invincible ancient family
Chapter 882 1 days ago -
Dragon: Dragon Realm
Chapter 1892 1 days ago -
Mortal Immortal Gourd
Chapter 175 1 days ago -
Global Manhunt: If I let you flee, how can you solve the case?
Chapter 714 1 days ago