My system is not decent

Chen Wenzhe dipped his hands in water and began to trim the lip and body of the instrument.

The edge of the mouth should be even, and the body should be even. If it can be thinner, it should be thinner as much as possible.

The ancient craftsmen are seven points for drawing embryos and three points for trimming, while modern craftsmen are generally three points for drawing embryos and seven points for trimming.

And this depends entirely on the level of craftsmanship. Chen Wenzhe's craftsmanship is naturally very good, so he only needs to modify it a little.

After the embryo drawing is completed, I looked at the shape of the device, and then felt it with my hands. The carcass is still a bit thick.

Of course, after drying, the embryos can also be thinned by sharpening in the later stage. However, it can be done well when drawing the embryos. Why must it be trimmed by sharpening the embryos?

In this way, he is actually a specialist in the four techniques of drawing embryos, printing embryos, sharpening embryos, and glazing.

In this way, it is a bit of a hindrance to making porcelain.

I really don’t know if I don’t do it. Once I do it, I feel like I can’t do anything.

With a cruel heart, Chen Wenzhe once again consumed [-] achievement points to upgrade the embryo pulling skill.

Sure enough, the study time was shorter this time.

While pulling the embryo, familiarize yourself with the newly acquired inheritance in your mind, so that you can digest the inheritance faster.

Master-level embryo drawing technology, the embryos produced need less trimming.

In addition, he didn't need to print the embryo this time, even if it was a good embryo, he could save it because of the good drawing.

In this way, he has master-level characterization and painting skills, and can directly advance to the glaze process.

Specialized glazing is lagging behind again.

Let's learn, anyway, there are more than 100 achievement points, if you don't study, it's just a number to keep.

Another [-] achievement points went down, and he quickly learned a lot of glazing techniques.

There are generally several methods for ceramic glazing: bubble glaze, spray glaze, brush glaze, and pour glaze.

When laymen look at glaze, they just mention it, it's as simple as that, it's bubble glaze or dip glaze.

However, it is not easy to do such a simple job well.

Master-level craftsmanship looks very simple, but it is very difficult to actually do it.

Because they can reach the realm of great ingenuity and no workmanship, it can also be said that they are the most simple.

If it falls, the glaze will not flow into the mouth of the porcelain.

Lift it up, control the speed, and you can control the thickness of the glaze. It can be said that this is a show of effort!

This is real kung fu. After learning such a unique skill, Chen Wenzhe's level of craftsmanship in making porcelain has almost reached the master level.

Unfortunately, he has no achievement points.

Otherwise, he might as well upgrade the technology of printing embryos and embryos to the master level. In that case, he will not have any shortcomings in the field of porcelain making.

It seems to be normal in this studio to do a process and stay in a daze for a while.

After the embryo drawing is completed, there is no sharpening of the embryo, and the next step is to dry it. In this studio, it takes at least half a day to dry.

After the drying is completed, it is the depiction. After the depiction is completed, it is painted, and finally glazed and fired at this time.

Step by step, now it needs to be dried, Chen Wenzhe has no chance to learn, so naturally he has to do other work.

He took out the one-third of the chi ear bottle and looked at the body of the bottle. It was covered with blue and white cloud and dragon patterns. It is much more difficult to repair this porcelain than to make one.

The remnant vessel in Chen Wenzhe's hand is not bad. It has not been broken into pieces. Now it needs to make a new bottle body, connect the bottle mouth, and then it can be fired in the kiln.

First draw the relationship between the remnants and utensils on paper, and splicing them into a picture.

Some parts need special cleaning for dark spots and lines caused by foreign matter deposition.

Hydrogen peroxide or 84 disinfectant can be used to clean the cracks and gaps on the main utensils first.

Minimize the color difference in the seam as much as possible, so that there will be no traces on the mating surface after bonding.

Then use cotton strips on the debris, absorb hydrogen peroxide or "84 disinfectant" and apply it on the black spot line to "fish" out the black matter, usually half an hour.

In case of deep black, replace with cotton strips several times, and wash repeatedly until the black is completely washed away.

It should be noted here that several joint surfaces of each fragment must be cleaned with hydrogen peroxide.

Before bonding, wait for several joint surfaces of the fragments to dry before bonding.

To bond the remnants, the body of the bottle must be made first.

The characteristics of the Chi-ear bottle are obvious. Chen Wenzhe only needs to follow the appearance of the Chi-ear bottle and combine the size of the bottle mouth to pull out a qualified embryo, and then remove one-third of the upper mouth, and then glue the residual vessel. Portions are fine.

This kind of bottle with blue and white cloud and dragon pattern has two chi ears on the bottle mouth, which is more troublesome to make, but the body of the bottle is easy to make.

In this way, a bottle body can be pulled out according to the design drawing, and it can be completed without connecting the tire, because he wants to use the residual device for the upper part of the bottle mouth.

Porcelain such as chi ear bottles, even if he does not pick up the remnants, still need to use the tire jointing process. The neck and mouth of the upper part, and the body of the bottle are bonded together using the tire jointing technology.

Now there is no need to make the bottleneck part, it is very easy to make, but it only took a short time for Chen Wenzhe to draw it into shape.

The next step is finishing first, and after tire repair, it is dried again, and then cut according to needs, and finally the new and old porcelain are bonded to each other.

If you don't have enough confidence, the remnant can actually be repaired, such as cutting off the uneven parts, so that it will be easier to connect the tire.

But now Chen Wenzhe is a bold man with high skills. He doesn't want to waste any scraps, so he can only trouble himself.

At this time, his work is over again, and he needs to wait again.

Instead of waiting to waste time, it is better to learn more, so Chen Wenzhe washed his hands and planned to use his mobile phone to find out some things about Longquan Kiln.

He raised his head and looked at the classmates in the studio. It was almost noon, and Professor Tao hadn't come yet?

Chen Wenzhe stretched his waist, twisted his neck, and saw several people staring at him.

"What are you looking at?" Chen Wenzhe asked Chen Xingchen.

"Are you going to repair the remnants?"

"Is this a blue-and-white Chi-ear vase with cloud and dragon patterns from the Qing Dynasty?"

"Looking at the blue and white hair color, it should be from the early Qing Dynasty, the third generation of Qing Dynasty?"

"It looks like Qianlong's!" Brother Wang Jing, who rarely spoke, came over to join in the fun.

"The base money is gone, but I have seen a pair of well-preserved bottles of this kind. The Jiaqing money that fell on it should be something from the early Jiaqing period. The craftsmen at that time were still the batch of Qianlong."

"That's right." Wang Jing nodded, and continued, "Isn't it expensive?"

Through these few words, Chen Wenzhe was sure that this brother, who was usually not easy to talk to, was really good.

"One hundred thousand."

Although he was a little guilty, he could only grit his teeth and say it was one hundred thousand.

"Hey, in this world, counterfeiting technology has improved, and even the price of residual weapons has begun to skyrocket. This is no way for decent people like us to survive!"

Chen Xingchen shook his head, as if he really had no way out.

However, does fraud have anything to do with decent people?