I have a store in the comic world

It is colorless and transparent when pure. When it contains impurities, it is dyed into various colors, with white streaks, glass luster, and is transparent to translucent.

The three sets of cleavages are complete, and the included angle is equal to or close to 90°. Mohs hardness is 33.5, specific gravity is 4.04.6. Identification characteristics: plate-shaped crystals, low hardness, complete cleavage at nearly right angles, high density, no foaming when exposed to hydrochloric acid, and distinguished from similar calcite.

Barite is a non-metallic mineral product with barium sulfate baso4 as the main component. Pure barite is white and shiny. Due to the influence of impurities and mixed substances, it often appears gray, light red, light yellow, etc., and the crystallization condition is quite good. Barite can also appear as transparent crystals. Barite is a mixture.

The crystals of barite are in the shape of large tubes, and the crystals sometimes gather together to form rosette-shaped or bifurcated crystal blocks, which are called crested barite. Pure barite is colorless and transparent, generally white or light yellow, with glass luster.

Barite can be used as a white pigment, and can also be used in chemical industry, papermaking, and textile fillers. In glass production, it can act as a flux and increase the brightness of glass. But its main use is as a weighting agent in the drilling industry and in the extraction of barium.

......

Under the control of several scientists transferred from various places, according to the method given by Zhou Wenwen, 150 grams of barium sulfate was poured onto a 9×9 heat-resistant glass plate, and it should be evenly and empty in the center. Barium sulfate also needs to be round.

This is not over yet. They still have to prepare a cup of 100 ml of aluminum water solution containing copper, silver, and gold powder. The proportions are 6 copper, 3 silver, and 1 gold respectively. The amount of aluminum water is optional.

Of course, this step is also very simple. Soon, a measuring cup containing 1 ml of aluminum aqueous solution was prepared by a number of chemists, shipped urgently, and placed in the middle of the round barium sulfate powder.

After the measuring cup was ready, another item was also ready in the hands of many people who specialized in engraving, inlaying, and polishing. That was the red square columnar crystal dug out from the head of the fa1a combat magic puppet. and ruby.

Under the "refining" of these people, the huge red square column crystals turned into hundreds of 6 cubic centimeter cubes in the blink of an eye, and were piled around the measuring cup. Because the cubes were polished into smooth shapes, these cubes It just happens to form a "mirror wall".

And this is exactly what Zhou Wenwen wants. He wants to conduct an experiment. If he can use the ash beam emitted from the electron cycle conversion device to hit the "mirror wall" to refract the beam to the ruby ​​to emit radiation, he can use The properties of barium sulfate are used to determine the accurate coordinates of space-time cracks again.

This is the correct place where the enemies appear in the mission.

The reason why Zhou Wenwen did this was because Zhou Wenwen shot down the last fa1a combat magic puppet.

When Zhou Wenwen used the ash beam shot from the electronic cycle conversion device to shoot down the last fa1a combat magic puppet, he felt a sense of panic and uneasiness in his heart for some reason.

This panic and uneasiness is not the kind of fear Iron Man feels at the number of enemies, but an intuition about dangerous things.

To be more precise, Zhou Wenwen felt that something was not right. Everything was going too smoothly and too loosely.

Although the United States and the Soviet Union all suffered losses, they were basically within an acceptable range. Well, the fact that the United States lost nearly one billion U.S. dollars is a bit heartbreaking.

With this uneasiness, Zhou Wenwen instructed the stalkers, annihilators, attackers, supporters, and destroyers to enter the sea, salvage the two FA1A combat magic puppets that had not yet sunk and whose bodies and minds were relatively well preserved, and placed them On the deck of an aircraft carrier.

After using high-pressure water to clean and refresh the dirt and bullet marks on the fa1a combat magic puppets, Zhou Wenwen discovered that these fa1a combat magic puppets actually had magic array diagrams similar to circuits.

The magic array diagram found on the fa1a combat magic puppet is half similar to the magic array diagram in Qiao's notebook.

After discovering this, Zhou Wenwen immediately decided to conduct the first test, and the first test was to determine the exact coordinates of the space-time crack.

"On your marks, get ready"

When Zhou Wenwen's voice sounded, the electronic cycle conversion device on his chest, which was black just now, lit up white the moment the electronic sparks crackled.

At the same time, a data screen that only Zhou Wenwen could read clearly was projected, and it read in Chinese and English:

English:aees0.1.

Chinese: Ash Energy Launch 0.1 System.

Full name: aβ electron absorption cycle conversion emission ash energy 0.1 system.

Maximum stored aβ energy: 3000aβ.

Currently stored aβ energy: 300aβ.

Maximum storage electrons: 1000a.

Current storage electronics: 501a.

......

Previously, Zhou Wenwen listed the first correct formula and obtained the seventh value polynomial formula, namely

xaвci.

td.

0.073 degrees aв73al91.927aв275.124m.

0.026 degrees aв26al33aв101m.

0.0079 degrees aв0.79al1aв2.992m.

Among them, x and cd are unknown numbers, which are stirring and mixing, and t is time. It is known that 168 seconds represents the unknown.

The principle is that the electron cycle device mixes aβ energy and electrons together and then emits them, and it can absorb 0.001 degrees of aβ energy and 1a current in the energy system per second, with a maximum output of 30kl.

These absorbed aβ energy and current will enter the accelerating tube along the superconductor. After circulating for 1 seconds, they will be mixed into 168l of ash energy, and then enter the accelerating emitter to emit the ash energy beam.

Now, in this case, the formula cannot be changed, because the purpose this time is refraction.

Refraction is when light is incident obliquely from one transparent medium "such as air" into another transparent medium "water", the propagation direction will generally change. This phenomenon is called the refraction of light.

Refraction, also known as refraction, is an optical term that refers to the change of the direction of light due to the difference in wave speed when light enters from one medium to another, or when it travels through parts of the same medium with different refractive indexes. Phenomenon. For example, when a wooden stick is inserted into water, the naked eye will think that the stick is bent when it enters the water. This is due to the refraction of light when it enters the water, which brings about this effect.

So based on this, the formula should be:

acbc∥aвi.

ab∥aвixc.

t∥d.

Among them, a, b, c, and d are unknown numbers, ∥ is refraction, t is a known time of 168 seconds, which represents the progressive formula, aв is the symbol of aβ, and i is the symbol of current.

The formula is interpreted as the total energy level of the first emission, and the total energy level of the second emission is parallel refracted, which is the final answer to the ash energy.

Further formula simplification:

cab∥aвi.

ab∥aвixc.

cab∥aвi∥ab∥aвixcd.

Chapter 047 Preview Mirror Wall