The richest man's dad: I was restricted from high consumption at the beginning!

"But I am different. I am an artificial intelligence. I control the mechanical equipment, and these parts can also be processed!"

The processing technology of the lithography machine has high precision, and the technology of manufacturing related parts is also very high!

Take the lens that refracts the light source in the lithography machine as an example.

The smoothness required by this lens is equivalent to magnifying a lens countless times.

It is about the size of a country, but its smoothness cannot exceed a strand of hair.

There are dozens of such lenses in the lithography machine.

This is all the current mechanical processing simply can not be completed.

It needs to be made by hand.

Just cultivating such workers cannot be accomplished in one or two generations. This is a legacy.

Of course, there are many techniques in our country that require extremely high precision and can only be done manually.

For example: reflective ladder gratings, core components of fighter jets, astronomical telescope lenses, and even gunpowder for rocket satellites are all carved by hand.

In fact, there is also a problem involved here.

Does the processing method directly determine the processing result?

Not all.

There is also the most important part in processing: that is, compensation processing.

It is equivalent to the feedback link in the control system.

Automated processing equipment does not have compensation processing... It cannot give feedback on some problems in the processing process.

Most of the equipment is: set the operation program, select the processing method, and get the processing result directly.

Made by hand, with one in the middle: observation, feedback, modification, optimization...

Repeat this process over and over to make adjustments and finally get the result!

Get machined parts!

That is to say, in the process of processing, there is no way for machines to observe, improve and optimize carefully like humans.

But 'Candle Dragon' is different!

Zhulong is an artificial intelligence, and she can control various machine tool processing equipment, and can also observe, give feedback, modify, and optimize.

Constantly repeat improvements, and finally want the finished product!

Even better than humans!faster!

Can a 5nm lithography machine be made?

Li Hao has no doubts at all!

Isn't the aircraft carrier just as difficult?

It's not the same thing now!

First let Zhulong improve the precision of various processing equipment such as machine tools, and manufacture various parts required by the lithography machine, and then assemble them!

猫!九'老?字!号.小.说;,群::9;,4.0:7,.5?7.;3""0:;3　　当然这是零部件，其他光源、对准系统等等，还有各方面的技术需要搞定！

Chapter 94 Pointing to Electromagnetic Technology, Haoding Technology Receives 23 Billion! ! (1 more)

Hangcheng.

The Huazhong Automobile production plant covers a total area of ​​more than 1500 mu. Such a large site must not have been fully invested.

On the wasteland outside the automobile production factory, there are several kilometers of sites surrounded by iron sheets.

This is not for development.

Just experimenting.

On the ground inside the iron sheet, there is a long track with coils on both sides.

A cable thicker than an arm is directly connected to the national grid and connected to a huge capacitor.

The instantaneous discharge capacity of the entire capacitor can reach 10 kilowatts, which can release 51 degrees of electricity.

On the entire track covered with coils, a round car model, driven by electromagnetic force, shoots out in an instant!

The computer on the side shows that the speed of ejection from the orbit has reached 170km/hour!

This rounded car model is made of metal and completely solid.

Its weight reaches 20 tons!

As for why you want to create a rounded car model?

Because this is the production plant of Huazhong Automobile!

We are doing experiments on cars, don't think about it!

If you randomly get an iron lump, various factors will affect the resistance, and there will be various errors in the electromagnetic ejection test.

If you make a model airplane, it will be too obvious.

How about making a bullet-like model?

What are you doing?Are you researching missiles?

In the end, Gao Yun and the others thought that Haoding Laboratory had a cooperation with Huazhong Automobile.

It just so happens that the follow-up test of electromagnetic ejection cannot be carried out in the experimental building.

Otherwise, the building will be bombed through.

Transfer to Hangzhou Huazhong Automobile Production Plant, then make the test propulsion animal into the appearance of a car model.

"Capacitor, motor, coil, thrust...what do you think is the most important?"

On the side, Gao Yun, Pan Jiashi, Wu Guangjun and others sat in front of the computer.

Looking at the data of the electromagnetic ejection experiment just now, I heard the question raised by Mr. Li beside me.

"Push!!"

"At present, the energy released by the capacitor must be enough. The motor still needs to be strengthened, and the thrust can naturally be improved...I think it should be the coil and materials."

Li Hao said: "None, it's stability!"

"..."

Gao Yun and the others were silent.

You tell us the question and let us choose?Turns out all the answers are wrong?

What a dog! !

Li Hao adjusted the data in the computer: "This is a few tests. When the model flies out, the acceleration curve on the track..."

There is a slight fluctuation in the whole curve, which is not too big.

Li Hao said seriously: "Where is this electromagnetic ejection going to be used, everyone should always remind themselves that stability must always be the first priority, and this acceleration curve is not stable enough."

"Secondly, there are many mistakes... There have been three mistakes in the past few days, and the entire design needs to be revised."

"Do it 10000 times! 10 times without making a single mistake!"

"The whole technology is not difficult, but you still haven't grasped the most important thing."

"The core of electromagnetic ejection technology is to use electric current to create a magnetic field, so as to use magnetic force to eject..."

Li Hao has long used the "R&D Center" to research the electromagnetic ejection technology, and the related technologies are all in his mind.

Some time ago, I went to Bincheng to be busy with Hongxin's affairs, so I didn't communicate with Gao Yun and the others.

After returning from Bincheng to Xiahu, when Haoding Laboratory was installing and debugging the supercomputer, he took the time to communicate with the electromagnetic ejection research and development team.

In addition, Li Hao delegated the more powerful ability of 'Candle Dragon'.

In the whole laboratory, not only the electromagnetic ejection research technology, but also other aspects of research, with the cooperation of "Zhulong" and supercomputer, the progress has been greatly improved.

Li Hao personally taught the electromagnetic ejection technology, and the progress is also very fast.

A 20-ton object can already be pushed and reach a speed of 170km/hour.

If this was tested in Haoding's laboratory, the building would be blasted through.

Li Hao has to deal with things in Hangzhou during this time.

The electromagnetic ejection research project can only be moved to Hangzhou Huazhong Automobile Factory.

To improve the entire electromagnetic ejection technology, Li Hao also reminded them to let them understand, research and improve by themselves.

In order to play a greater role in exercise.

Otherwise, if Li Hao throws out the electromagnetic ejection technology in his mind, the 003 aircraft carrier can be used directly.

……

"Boss, Huazhong Automobile has signed a total of 2.3 million mobile phone battery orders."

"6000 million orders for batteries for other tablets and computers."

"Batteries for electronic equipment are expected to achieve a revenue of 400 billion!"

"Now Haoding Technology has paid 23 billion patent fees, and there are still about 10 billion unpaid."

Tan Ya brought a document and sent it to Li Hao!

this is a good news!

Finally started to collect patent fees!

To say which industry is the most volume!

It must be a mobile phone!

Needless to say, the chip, for the first launch of a chip, mobile phone manufacturers can roll up; the chip is updated and iterated every year, the performance is continuously improved, and the power consumption is continuously reduced.

It can make a little space for the battery, make the phone thinner, improve the battery life, use a higher resolution, high refresh screen, and a better camera!

摄像头也是从1个到2个、从2个到3个、从3个到4个！

Li Hao couldn't help feeling: the phone is really too curled up! !

In this case, the emergence of a high-energy-density battery greatly improves the battery life of the mobile phone.

This is a must-have for major mobile phone manufacturers! !

Among other things, domestic mobile phone manufacturers will definitely adopt it.

In the case that others do not, I have a super high battery life, which is a selling point! !

Even: With a mobile phone battery with ultra-high density and longer battery life, mobile phone manufacturers can make the battery thinner and thinner!

Get a higher-resolution phone screen, a higher-resolution phone screen, and a better camera!

A battery breakthrough may make mobile phone manufacturers more aggressive!

Roll it up for me! !

At the beginning, Li Hao planned to only authorize the patent of Huazhong's power battery.

Battery patents for electronic equipment are kept in their own hands.

It is to know that electronic products such as mobile phones will inevitably be rolled up.

Since Huazhong Motors announced the patent for high-energy-density batteries, domestic mobile phone manufacturers have come to contact them.

The first contact with Li Hao's Haoding Laboratory.

After all, the patent is authorized by Haoding Laboratory.

It's a pity...the battery patents are all authorized to Huazhong Automobile, and mobile phone manufacturers can only find Huazhong Automobile to purchase batteries.

These mobile phone manufacturers: Xiawei's mobile phone shipments last year: 2.1 million!

Rice’s mobile phone shipments last year: 1.3 million!

OP last year's mobile phone shipments: 1.2 million!

Ranked third, fourth and No.5 in the world respectively.