The richest man's dad: I was restricted from high consumption at the beginning!

There is more than one such robot.

Above the entire ceiling, there are rails extending in all directions and covering the entire ceiling.

These octopus-like robotic arms are hung on the ceiling rails and can move freely in the 1200-square-meter laboratory.

"Zhulong, according to the data and design drawings I entered, let the people in the laboratory below deliver the required materials, and then you can build the car according to the design drawings..."

While working, Li Hao entered the car design drawings completed by the "R&D Center" into the computer.

Building a car is difficult and difficult, but simple and simple.

Even ordinary people, if they have enough technology and don't borrow any large equipment, can rub out the driver.

It's just a matter of time!

It is even easier if you borrow various equipment.

The real difficulty in building a car is the various intellectual property rights.

The important status of automobile production does not mean that it has a high technical content.

It is because the production and manufacturing of automobiles can drive a huge industrial chain.

The Haoding Experimental Building has 20 floors and covers an area of ​​more than 1200 square meters. Various processing machinery, equipment, and experimental robotic arms...all controlled by 'Zhulong'.

Building a car is still very simple!

Raw materials, cutting, stamping, welding, painting, assembly...

Candle Dragon can easily control the equipment + robotic arm here.

Although it is not as good as an automated production line, one car can be produced in one minute.

The automated production line of the automobile factory has all kinds of parts and components, and of course it runs fast!

Here in 'Candle Dragon', everything is made by oneself, and the speed will be slower.

This 'slow' is very fast for normal people!

Of course, not all parts have to be made by ourselves.

Batteries, motors, on-board chips, radars, cameras...there are all inside the laboratory.

These don't need 'Candle Dragon' to make them by themselves, just have someone send them over and assemble them.

猫:.九:老!字.号,小"!说;'群!9::4"0'7..5,7;3'?0'?3　　“好的！”

After receiving Li Hao's order, Zhulong quickly mobilized raw materials and parts from various research groups in Haoding Laboratory.

It controls the unloading robot to move various materials to the laboratory at the elevator.

The other side controls the mechanical arm to cut the metal, clamp the metal plate to stamping, and then weld...

More than a dozen robotic arms, holding various equipment, work together to process and control laboratory machinery and instruments!

That feeling... a group of demons dancing wildly! !

Throughout the laboratory, there are various fast-moving robotic arms and fast-sliding robotic arms.

It looks a bit messy, but every mechanical arm looks orderly.

It was the first time for Li Hao to let 'Candle Dragon' control these mechanical arms and equipment.

After all, it hasn't been long since the research of 'Candle Dragon' came out.

The mechanical equipment and instruments here have also been bought and placed here one after another recently.

The mechanical arm has high requirements on flexibility and precision. The laboratory has only recently built it, and it is still being upgraded and optimized, and will be replaced in the future.

In the past, even if Li Hao wanted to use it, he had no chance, and his skills in all aspects could not meet the requirements.

This time...he had seen the power of the 'Candle Dragon'.

And that's just the tip of the iceberg!

"You go ahead...let me know when the car is finished."

Li Hao saw that 'Candle Dragon' was busy controlling countless waving mechanical arms, said hello and prepared to wait in the upstairs office.

In fact, 'Zhulong' is not busy at all, she can still spare computing power to communicate with Li Hao.

She is everywhere in the Haoding Experimental Building.

'Candle Dragon' said: "Okay, I'll let you know when it's done."

Li Hao returned to the office on the top floor of the 21st floor and took out a piece of paper.

Organize what to study next.

"Wait until the special metals required for supercars are well researched, and the electromagnetic ejection technology can be studied as follows."

Li Hao used the "R&D Center" to study electromagnetic ejection technology, because he wanted to master the relevant technology in his brain after completing the research.

In this way, he could give Gao Yun and the others advice.

There is no need to take out all the technology and let them copy it.

This can play a role in exercise.

Anyway, there are still several years before the No. 3 aircraft carrier is launched.

There is no need to worry too much about the electromagnetic ejection technology, just train the technicians in the laboratory.

"The research on the lithography machine can also be arranged!"

Li Hao didn't plan to make a mobile phone.

There is no research on mobile phone chips at all.

But with Huada Group and Huazhong Automobile, there is a great demand for on-board chips.

The on-board chip has long been conquered by the "R&D Center", and related patents have also been applied for.

The semiconductor research team of Haoding Laboratory is conducting subsequent upgrade and iterative research on vehicle chips.

Most of the automotive chips are still using 90nm process technology.

That's because mobile phone chip companies are still in the mobile phone industry.

In Li Hao's last life, the mobile phone industry was no longer involved.

Consumers are not so diligent in changing mobile phones.

These mobile phone chip companies have also been involved in the automotive chip industry.

Those on-board chips that were still using 90nm and 40nm process technology were directly hit by the dimensionality reduction of other 7nm process technology on-board chips.

Yes, we are talking about Qualcomm, which improved its mobile phone chip and used it in the car chip.

Simply bullying!

Therefore, the 32nm lithography machine that Li Hao entrusted Qi Yong to buy can still be used in the past two years.

In the past two years, mobile phone chip manufacturers have not moved and have entered the field of automotive chips.

The 32nm lithography machine is not enough at all, and the lithography machine must be upgraded for this trip.

At this time, only 32-nanometer lithography machines can be bought. In the future, semiconductors will be sanctioned, and it is even more impossible to buy higher-precision lithography machines.

There is only one way: make it yourself

In the future, we need to use the "R&D Center" to study lithography machines... Haoding Laboratory also needs to make technical reserves in this area.

"In addition to lithography machines, there are other technologies in the chip industry chain that need to be overcome!"

In the field of chips, in addition to lithography machines, which are equipment for making chips, there are also photoresists and lithography auxiliary reagents... At present, there is a blank in the country.

And software, needless to say.

In terms of industrial software, countries such as Europe and the United States have developed for so many years, which is their strength.

Several top universities in China are prohibited from using software, or some foreign industrial software is directly banned by universities.

This is not the first time it has been exposed.

But for software, there are substitutes for things like Bingcheng University of Technology and some research institutes, and with the presence of Zhulong, it's not a problem.

The remaining lithography masks, lithography gases... These supporting industrial technologies also need to be researched and overcome.

"This is really difficult!"

Li Hao briefly checked the various technical problems and limitations in the semiconductor field.

too difficult!

Every step of technology is a variety of problems.

The field of integrated circuits and semiconductors, from software, hardware, equipment, raw materials, auxiliary materials, etc., is almost monopolized by overseas companies.

There are also domestic companies that do this, but most of them are catching up and lagging behind too much.

Only the etching machine has reached the world's leading level.

The etching machine is one of the equipment needed for chip manufacturing, and it was originally included in the prohibited sales list.

When domestic companies take control, the related equipment will be lifted.

Moreover, the relevant domestic technology has just made a breakthrough, and there is no formal mass production capability.

Foreign companies will lift the ban on the equipment or product, and directly reduce the price to hit the market.

This has led to... domestic companies have just made breakthroughs, and have not even mass-produced... Even if they are produced, the cost will be relatively high because the technology is immature in all aspects.

Overseas companies have already mastered this technology and product, and the cost is very low...the product is even more mature!

How do domestic users choose?

Overseas companies are even willing to sell at a loss, just to suppress the market!

Use the market to force domestic companies to death, so that domestic companies that have mastered new technologies have no way to make profits and make money. How can they continue to invest?

Every step is too difficult!

It's not just in the field of integrated circuits and semiconductors.

It's the same in many other fields.

Chapter 73 Five new cars, special alloys! (1 more)

Li Hao is sorting out follow-up research projects in his office.

In less than an hour... the voice of 'Candle Dragon' came from the computer.

"Boss, the first car has been built!"

So fast?

Li Hao glanced at the computer in front of him, and it took less than an hour.

This speed is really fast!

There is a monitoring screen on the 20th floor in the computer, and it is still Zhulong who controls countless mechanical arms to work.

In the corner next to the laboratory, a colorless, round, cat-like car parked quietly.

It's hard to imagine that Zhulong completed the manufacture of a new car in less than an hour... more than 40 minutes, controlling the laboratory equipment and dozens of robotic arms!

Of course, a car is just a metal plate stamped, cut, welded, and then assembled with various parts.

It may take a day or two for a person to complete it, even for a skilled team.

The key is that this is a new model, and no mold has been opened.

All parts need to be cut, manufactured, welded and assembled by themselves.

Must be skilled teamwork.

'Candle Dragon' alone is a very skilled team.

Dozens of mechanical arms process at the same time, and the accuracy will not be the slightest error.

It's not making chips...just car parts.

Batteries, motors, chips, sensors...they are in the laboratory, just take them and assemble them.

Car program?Vehicle system?