From Almighty Scholar to Chief Scientist

Lin Xiao patted Yang Kaiping with a smile, and said, "It's small, the layout is small."

"I thought it was a big problem, just no money!"

Then he directly took out his mobile phone and called Ma Gaoliang: "Director Ma, our X-ray project is out of money...well, call another billion...OK, okay, okay, then hang up. Okay, okay, bye."

Putting down the phone, Lin Xiao gestured "OK" to Yang Kaiping, "It's over, just check the account when the time comes, it should be there soon."

Yang Kaiping was stunned: "This is... a billion?"

"Otherwise, one billion yuan should be enough, Director Ma has always been quite generous." Lin Xiao said as it should.

Yang Kaiping was even more speechless: "That guy Ma Gaoliang is still generous? We used to apply for a project funding or something, as long as he can manage it, he has to review it for a long time, so stingy."

Lin Xiao: "...the Ma Gaoliang you mentioned and the Director Ma I mentioned are the same person?"

Yang Kaiping rolled his eyes: "Besides Ma Gaoliang from the Science and Technology Bureau, who else could it be?"

"Uh... well, probably this Director Ma has a dual personality, and he will show his generous side when he gives me money."

Yang Kaiping: "..."

Suddenly he remembered, who is this in front of him? That's Lin Xiao. Isn't it normal to make the application for funding easier?

Comparing Ma Gaoliang to a goddess, and then these scientists are the spare tires, and then Lin Xiao is tall, rich and handsome, and then he becomes the spare tire licking the goddess, and the goddess licking the rich second generation.

He patted his head, and said helplessly: "Forget it, I won't tell you, do you want to go in and have a look now?"

Anyway, if the funding problem is solved, then there is no need to worry about other things. After that, they will just come here with a lot of money.

"Okay, let's go and have a look."

Lin Xiao nodded, then got up, left the office with Yang Kaiping, and walked towards the real workshop inside.

Before entering the workshop, they first came to the wind room, and the huge wind blown away all the dust and other things on their bodies.

After blowing for about a minute, the air outlet stopped, and then they entered the dressing room, where there were disposable clean clothes. After they changed, they came to the real entrance and walked in.

In the clean room, the biggest source of pollution is the people who enter from the outside, so before entering, they all need to go through such steps to enter.

After entering the workshop, what greets the eyes is a very spacious space, which contains many mechanical equipment, and among them are five mechanical instruments that have been built, which look very large.

These five things are obviously the X-ray machine they are building.

Because five double-workbenches were built, only five of them could be built for the first assembly of the lithography machine.

Of course, as long as they can succeed, they can prepare for mass production.

At that time, Huaguo, the world's factory and the country with the most complete industrial system, will be fully operational to provide assistance for the production of X-lithography.

Looking at the five mechanical instruments, Lin Xiao couldn't help but quicken his pace and walked over quickly.

Machinery is a man's romance, especially the lithography machine that has not yet been installed with a casing. The complicated mechanical structure inside is the most complicated in the world.

When the surrounding engineers and mechanics saw Lin Xiao, they immediately shouted: "Mr. Lin!"

"Well, hello everyone."

Lin Xiao nodded to them, and then asked, "How long will it take to install it?"

"Estimated maybe until early September," replied a mechanic.

"Early September?"

Lin Xiao frowned slightly, and it would be very difficult to realize the completion of the National Day that he planned with the subsequent commissioning work.

Although it does not necessarily have to be completed on the National Day, it is always better to be able to complete the work on the National Day.

"Can't it be earlier?"

He said.

The mechanic showed helplessness on his face: "We all want to, but now we work from morning to night every day, with limited manpower, and this lithography machine is too troublesome to assemble, although the precision of these parts is not as high as The double workbench and the optical path system need to reach the nanometer level, but there is also a slight trace, this speed is really not up to speed."

Hearing what the mechanic said, Lin Xiao didn't say anything, and if he asked again, it would be a bit difficult for others.

However, when he turned his head and glanced at the machines next to him, his eyes suddenly lit up, and he said, "If you don't have enough manpower, then add me."

All the people present were stunned.

"Master Lin, you want to do this..." The mechanic thought he heard it wrong.

"Why, can't it?" Lin Xiao frowned, and said: "I am also the inventor of the eight-point structure, and I also drew the structure of the lithography machine you installed, no kidding, no one, than I know more about X-ray machines."

He made the appearance of playing an accordion with both hands, with a very serious expression.

Chapter 299 X!

Listening to Lin Xiao's words, everyone present couldn't help but look at each other.

Make sense?

Lin Xiao's eight-point structure, even those mechanics who have been engaged in the manufacture of such high-precision mechanical instruments for many years, have to admire it.

Especially the mechanic in front of Lin Xiao who looked to be over 50 years old, named Huang Yaping, who was a student of an eighth-level fitter back then.

Eighth-level fitters in Huaguo in the last century were all big bosses, but later more sophisticated machine tools replaced the role of eighth-level fitters, so these names are basically unknown now, but having these Technical people are still rare talents in the industry.

And this Huang Yaping, who used to be an apprentice of an eighth-level fitter, later studied various machine tools seriously, and now he has already been rated as a researcher-level senior engineer, that is, a senior at the same level as a professor. Solid, that's why he was selected by the X-ray project to be responsible for the main assembly of the X-ray machine.

And even he admired Lin Xiao's eight-point structure at the beginning. This achievement alone was enough to make Lin Xiao a top figure in their mechanical world.

However, they were still a little worried.

Although the eight-point structure is really powerful, can Lin Xiao really work as a mechanic?

The eight-point structure is research and development ability, but their current assembly work is hands-on ability.

In their view, the best thing for people like Lin Xiao is to do mental work on the desk, and then develop a methodology that can solve the problems they face, and then those who do the labor follow the instructions in his methodology , finally solved the problem.

Seeing that everyone present still looked unbelieving, Lin Xiao rolled up his sleeves and said, "It seems that I have to show you."

He turned his head and looked, and saw a square metal block next to him, then he picked up the metal block, pinched it, and squinted his eyes to look carefully.

The people next to him couldn't help wondering, what is he doing?

After a while, Lin Xiao said, "This thing is 3.234 cm long, 2.251 cm wide, and... 1.324 cm high. Well, the error should be about three wires."

Hearing the data reported by Lin Xiao, everyone present was stunned.

Lin Xiao, can you directly see the length, width and height of this piece of metal?

Of course, seeing that the length, width and height are nothing, Huang Yaping can tell the length, width and height of this metal block with his naked eyes.

However, the degree he can distinguish is the decimal place of centimeters, that is, the degree of millimeters.

He can distinguish the difference of up to 1 mm, and some people who are more powerful can distinguish the difference below 1 mm, or even 0.5 mm.

But Lin Xiao, what is this?

Three decimal places?

This is directly down to the level of one hundredth of a millimeter!

It is equivalent to the level of "silk".

A trace refers to 10 microns, which is one hundredth of a millimeter, and Lin Xiao said that the error is about three filaments. In other words, he can distinguish things of 30 microns?

Is this... a human eye?

Everyone around showed dubious expressions, even Yang Kaiping looked in disbelief. If Lin Xiao was not the chief designer, they would have said he was bragging.

Huang Yaping shook his head directly and said, "Impossible, absolutely impossible!"

"Master Lin, we know that you can draw with great precision, but you are so good at it, the human eye can't do it, right?"

He has been in this machinery industry for a long time, and he is well-informed. He has seen people who can directly distinguish 0.1 mm, which is 10 wires, with the naked eye. There are also many experienced machine tool workers who can rely on the feel If he directly cuts or erases one or two strands, he himself can control it to a few strands by hand, but the touch is completely different from the naked eye. Experience is required.

Lin Xiao is not an old skilled worker who has been immersed in their machinery industry for many years. How could he be able to distinguish the three wires with the naked eye?

But Lin Xiao said with a smile: "The human eye can see things at a minimum of about 10 microns, which means that the human naked eye can directly distinguish every trace in theory, and I have only reached three traces."

Then he handed the metal block in his hand to Huang Yaping, and said, "You should have a thousand minute caliper here, right? Just test it if it doesn't work."

Huang Yaping still couldn't believe it. When he saw Lin Xiao handing it over, he took it, then picked up the digital display thousand minute caliper next to it, and started to measure it.

The first is long.

Fortunately, the metal block did not exceed the measuring range of the digital micrometer caliper in his hand, so it just fit into it.

And soon, because it was digitally displayed, the result came out directly, "It is... 32.32 mm!"

As soon as this number came out, the people who had shown expressions of disbelief just now were shocked at this moment. They gathered together and glanced at the displayed number. It was indeed 32.32 millimeters, which is 3.232 centimeters!

What Lin Xiao just said was 3.234 centimeters, the error is only... 2 silk!

Even though they were all well-informed, they couldn't help but click their tongues at this moment.

This is really perverted to a bit too much, right?

Huang Yaping took a deep look at Lin Xiao, then lowered his head again, and continued to measure the width, "The width is... 22.52mm."

It is only slightly different from the 2.251 centimeters that Lin Xiao just said.

If the first time can be said to be luck, then this second time, can it still be called luck?

the third time.

"Height is 13.21 mm."

Huang Yaping quickly measured the height.

The 1.324 centimeters that Lin Xiao said was three wires away, but it was within Lin Xiao's error.

For a moment, everyone was silent.

But Lin Xiao quickly broke their silence: "Is the head office now?"

Huang Yaping smiled wryly, then extended a thumbs up to Lin Xiao, and said, "Master Lin, I have never convinced anyone before, but today you have completely convinced me. I read online that you are omnipotent. I used to I don’t believe it, but looking at it now, you are truly omnipotent.”

Lin Xiao laughed and said, "I can't be omnipotent. For example, in biology and informatics, I haven't made any achievements yet."

"You don't need to be modest." Huang Yaping waved his hand and said, "Now if you want to make sure to stay, then I definitely have nothing to say, just rely on your eyes to distinguish three wires, and I don't know how many measurements we will save in the future The time it took was originally early September, but now I estimate that it will be in mid-August."

Measurement is a very time-consuming thing, but it has to be done, especially their current work, which requires a lot of measurement work.

But now with Lin Xiao, I don't know how much effort it can save them. Although the error of Lin Xiao's naked eyes is still about three wires, it is still very helpful to them.

So now Huang Yaping is sure to finish it more than ten days ahead of schedule.

And Lin Xiao also smiled and said: "Okay, this time is considered to meet my requirements, so let's start working now?"

Seeing that Master Lin was so active, Huang Yaping smiled and said, "Okay."

Afterwards, Lin Xiao directly joined their work, and after that, his amazing ability to distinguish with the naked eye really played a huge role in the future, unless it was the kind of work where the accuracy must be below three wires, They still need to use professional instruments to measure it. At other times, it is basically Lin Xiaozhi who does what he does.

For a while, their speed also increased a lot.

As for Yang Kaiping who came with Lin Xiao, he was full of helplessness. He didn't expect that their chief master Lin would do this kind of physical labor himself, but there was no way. It was really hard to find a top mechanic like Huang Yaping. They are really short on manpower.

However, Yang Kaiping was still a little puzzled, why did Lin Xiao rush so fast?

Seeing Lin Xiao's figure entering work, he asked this question.

Lin Xiao replied: "I hope we can use our lithography machine to make, make our chips as much as possible during the National Day."

Yang Kaiping was taken aback, National Day?

Then he understood what Lin Xiao meant, and it was indeed worth doing to present this gift to the country on National Day.

So he said, "I see, I'm going to pass this on to other people, and the people in the software department, and get them up to speed."

"Ah."

Lin Xiao nodded, then stopped talking and continued with his work.

And Yang Kaiping didn't stay here anymore, and went to inform Lin Xiao that he planned to officially manufacture the chip on National Day.

Especially the software department.

The software department is speeding up the development of their lithography machine operating system.

It is not enough to manufacture a lithography machine, but an operating system must be developed.

So, now we are waiting for these two carriages to reach the terminal together.

……