"Go to the office building!"

Fang Qiang showed the Xinghai Group's internal certificate to the security guard, and naturally entered without hindrance.

In the factory area, the dormitories were directly demolished and rebuilt instead of being built with red bricks.

The frame structure used in the dormitory building is also better in terms of the living environment.

There are a lot of people living in the dormitory, many of them are young workers, or temporarily rest in the dormitory.

R&D and senior technicians have all been allocated houses in the employee community anyway.

Some ordinary workers with outstanding performance can also apply for housing.

The premise is that you have to get married.

After workers get married, they basically only need to apply, and the factory will allocate a two-bedroom house for them to live in.

I have to say that the previous management model of state-owned enterprises was really effective in retaining talents.

The management model of state-owned enterprises cannot be said to be completely negated, that is wrong.There are many things that are worth learning from Xinghai Group.

Han Songlin pushed the door and got out of the car. The whole factory area has changed a lot. Many old buildings have been demolished and new ones built.

Now only the tall trees and flower beds that look a bit historical in the factory are left to tell the long history of Changxing Machine Tool.

The office building of Changxing Machine Tool is still old and has not been rebuilt here.

Han Songlin couldn't help showing satisfaction, no matter what Kong Fansen wanted to express, Han Songlin thought it was good.

The office side manages the operation of the entire factory. If your office side enjoys it first, what will the hard-working workers think?

In order to manage people well, in addition to the system, there is also something called prestige.

Han Songlin slid his finger across the wall. This office building is quite old.

The same age as the machine tool factory.

Knock on the door of Kong Fansen's office.

"Enter!"

Kong Fansen was busy with his head down, subconsciously raised his head to see who came in, and then saw Han Songlin.

"Boss!" Kong Fansen called out, full of emotion.

Since Han Songlin bought Changxing Machine Tool, he seldom came here; this made Changxing Machine Tool feel uneasy.

Especially last year, Changxing Machine Tool lost money again, and it lost more than the year before.

In fact, in the past year, the workers in the whole factory were quite happy, because the sales in the factory were good.

According to everyone's simple feelings, if the sales of the products in the factory are good, the factory will definitely make money.

But in the end, the factory announced the financial report for the past year. Everyone saw that the entire factory had a direct loss of [-] million.

I was stunned on the spot.

"Why do you have a mournful face? I don't know, but I thought something was wrong." Han Songlin glanced at the sofa with some disgust, and then sat down.

"Old Kong, the sofa in your office should be replaced. When I came in and saw you looking so poor, I thought Changxing Machine Tool was going to go bankrupt."

Kong Fansen smiled wryly, Changxing Machine Tool is about to go bankrupt now.

Without the support of the group, I don't know how many times I went bankrupt,

"Boss, with the current situation in the factory, how dare I change the sofa!"

Han Songlin crossed his legs, leaned on the sofa, and looked up at the ceiling. On the ceiling, the wall paint had peeled off a lot.

"The office building in the factory needs to be repaired. This is the face of the factory. As for the loss, there is no need to worry about it. It is a strategic loss, and the loss caused by investment in research and development is not a problem. It’s called a loss, it’s an investment in the future. You have to change your old thinking.”

Kong Fansen smiled and said nothing, all the other factories created benefits for the group, not to mention that Changxing Machine Tool did not create benefits, and the group paid for it.

He felt embarrassed when he saw the leaders of other factories!

As for Kong Fansen, he has done his best in the management of Changxing Machine Tool.

Resolutely implemented the group's rating system for skilled workers and R&D personnel. In addition, in terms of sales, sales outlets have been established nationwide, at least in major industrial cities.

This allowed Changxing Machine Tool to roll out its sales network across the country for the first time.

In terms of production, Kong Fansen also pays close attention to quality. Compared with the original product quality of Changxing Machine Tool, the product quality has been improved by leaps and bounds.

Now the same product is produced, compared with the original, the processing accuracy is much higher.

what is the reason?

The entire Changxing machine tool is strictly in accordance with the design drawings and production process.

In addition, in the production process, Changxing Machine Tool is also constantly improving. For any suggestions and technologies that can improve the technical process, Changxing Machine Tool will adopt and give rewards.

As a result, workers are enthusiastic about innovation.

Quite a few good suggestions were made.

One person counts the short, two counts the long, and three people are better than Zhuge Liang.

"Boss, I support research and development. However, as a company, if it loses money every year, it will take a big blow to the confidence of the employees in the factory."

Achievements, then everyone feels that this path is the right path.

When things go wrong, self-doubt becomes normal.

Chapter 516

"Confidence?" Han Songlin fell into deep thought at the same time. Confidence and morale are almost the same in many cases.When a team loses even self-confidence and falls into self-doubt, no matter how glorious the past has been, it will eventually disappear.

Han Songlin got serious: "Old Kong, the matter you mentioned is indeed a major event. The loss cannot affect everyone's confidence in the future. In this way, in the afternoon, the whole factory will be called for a meeting. "

Han Songlin is going to tell everyone a few words, don't blow the morale away.

"No, not today. Like this, tomorrow morning, the whole factory will have a meeting at ten o'clock." Han Songlin thought for a while, and then changed the time; he suddenly notified everyone of the meeting, what should the workers in production do?

Let them stop production?This is not acceptable, it will affect the quality of production.

Han Songlin's eyes were full of firmness: "Tomorrow, I want to talk to you about the future of Changxing Machine Tool in my heart!"

It is not so difficult for Han Songlin to establish the confidence of a company!Because for the employees, Han Songlin is their confidence. As long as Han Songlin says that he will continue to support Changxing Machine Tool, the worries of the entire enterprise will calm down.

As for whether Han Songlin has such influence?

There is really no need to worry. Although Han Songlin has no specific management of Changxing Machine Tool in normal times, and even people can’t see Han Songlin for a long time, these do not affect Han Songlin’s prestige in Changxing Machine Tool.

Hearing that Han Songlin was going to have a meeting tomorrow, Kong Mengsen couldn't help but relax. With Han Songlin coming forward, it would instantly condense the confidence and goals of everyone in Changxing Machine Tool.

"Boss, I'll notify you right away."

"This matter is not urgent. Let's go to the research and development side to have a look. After such a long time, there should always be some results."

Kong Mengsen said with a smile: "There are really many achievements."

The Changxing Machine Tool R&D Center, which is newly built, was put into use after a year of emergency construction.

Will the R&D center built in one year appear small?

Really not.

In terms of area, it can be quite broad.

When the entire Changxing machine tool was being built, it didn't consider such things as people coming to visit in the future.

So, Han Songlin and Fang Qiang went in and changed into new clothes, at least white coats and so on.

Kong Mengsen found Li Minghong who was standing aside watching the assembly, and the apprentice led by Li Minghong was directing the assembly.

"Li Gong, the boss is here." Kong Mengsen said, and pointed to the direction where Han Songlin was standing.

Han Songlin saw that there were quite a lot of various parts over there, so he didn't go there.

Just wait on the sidelines.

After passing by, a group of people gathered around, which affected the placement of parts, which was another trouble.

For Han Songlin, it didn't affect anything, but for those who were doing the assembly, it just delayed things.

Li Minghong was slightly taken aback, his eyes followed the direction of Kong Mengsen's finger, and he saw Han Songlin waving to him.

Letting the apprentices continue to assemble, Li Minghong hurried towards Han Songlin.

In Changxing Machine Tool, Li Minghong's current situation is much better than before.

These were all brought by Han Songlin.

For Han Songlin, Li Minghong is also grateful.

After all, there is no one who can fully support their own research and development.

"Li Gong, long time no see; how are you doing on weekdays?"

Li Minghong shook hands with Han Songlin with a smile and said, "Thanks to the boss, I have a very smooth life on weekdays."

"It's fine, if you need anything, call me anytime."

Kong Mengsen smiled and said: "Li Gong, the boss is here this time, just want to see your latest research results!"

Speaking of this, I immediately talked about Li Minghong's pride.

Li Minghong's CNC machine tool research and development team has expanded its members by an unknown number of times in more than two years.

Some are recruited from other machine tool companies, and there are also undergraduates who have just graduated from college students; of course, graduate students and doctoral students are naturally indispensable.

For the research and development of CNC machine tools, Li Minghong divided it into several teams, specializing in the research and development of CNC lathes, CNC milling machines, and CNC drilling machines.

Of course, Li Minghong also specially set up a CNC software research and development team.

And it can realize intelligent production management by combining with the industrial software of Hopesoft.

How many parts are produced on the CNC machine tool can be seen in the office immediately.

Li Minghong: "Boss, what we are assembling now is a CNC lathe. We have already assembled one before, and the machining accuracy can reach 0.01mm."

The processing accuracy of 0.01mm seems to be pretty good.

"This machine has been improved by us, and we hope that the machining accuracy can reach 0.005 mm."

Han Songlin didn't speak for a long time, thinking about what level this 0.005 mm belongs to; then, he didn't understand, anyway, male hair is generally 0.08-0.4 mm.

"Do you use domestic parts for the entire machine tool?"

This is very important.

Li Minghong also wants to say that all the parts are made in China, but conditions do not allow it!

For many parts, the domestic quality is not up to standard at all.

"Island products for servo systems."

Han Songlin propped his chin lightly and did not speak.

"Is there no good servo motor in China?"

"In this area, there is a big gap between us and foreign countries." Li Minghong felt helpless about this, but at the same time he held his breath in his heart.

Han Songlin didn't speak, but his heart didn't fluctuate too much, because he already knew about such a situation.

"Okay, I see."

Xinghai Group is also involved in the production and development of servo motors?

It's a bit unrealistic. It is impossible for Xinghai Group to be involved in all industrial categories.

Xinghai Group should be more of an integrator of industrial systems, integrating the best domestic industrial enterprises into an industry.

Automobile industry, machine tool industry, metallurgical industry, and microelectronics industry, and perhaps other industries in the future.

Next, Han Songlin visited other CNC machine tool products; after seeing it, Han Songlin had a bottom line in his heart.

Many products now have the strength to launch the market.

As for how many market prospects it will have after it is launched on the market, no one is quite sure.

In addition to Li Minghong's side, Han Songlin also went to other machine tool R&D teams to have a look.

In the research and development of professional machine tools, Changxing Machine Tool is also involved.

Especially for Fuxing Industry to make automobile stamping line, this stamping line has officially started operation as a part of Furui automobile production line.

In terms of performance, it's pretty good.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like