Rule department scholar

Whether it is electronics, biology, materials, etc., multi-directional high-end technologies are not currently available in China.

For example, materials.

Although China has Z-wave compression material technology, it does not mean that compression materials are good. The cost of manufacturing compression materials is high, and the materials produced will be very heavy.

Even with anti-gravity technology, it is obvious that heavier materials consume more energy to drive them.

In addition, compressed materials may also have problems with performance exceeding

Exceeding the performance standard sounds good, but imagine that a problem that can be solved with a layer of film needs to be solved with a layer of metal plate, no matter in terms of cost or use, it is completely unnecessary.

This is just a technical issue of materials.

There are more technical problems in other directions. Of course, these technologies are not insurmountable or irreplaceable, but they will definitely consume a lot of time.

If you involve other agencies, you can save a lot of time and cost.

After the first internal meeting is over, preparations for the second design demonstration report begin.

This is a demonstration meeting specially prepared for the design team, and the participants are all very professional personnel, including leaders of some scientific research institutions.

More than a dozen people from the design team came to the capital to participate in the demonstration meeting. They will give superficial explanations on the overall design of the spacecraft and the design of each part.

Although this conference is also confidential, the confidentiality related to the design has not been too strict. For example, some of the professionals participating in the conference are only experts in related fields, and they only work in universities or institutions on weekdays. Not working exclusively for the national scientific research sector.

They signed a confidentiality agreement, but it is difficult to achieve complete confidentiality.

But the superficial design is not worried that it will be revealed, because design is not technology, but to stipulate some things on the basis of technology.

For example, the design of Z-wave devices.

These include the shape of the Z-wave device, its size and shape, its external functions, and its parameters.

and many more.

Even if all the design content leaked out, it wouldn't be a big deal at all, because other agencies simply don't have Z-wave technology, and it doesn't make any sense to know the design.

The estimated time for this design demonstration meeting is one week.

The design team needs to let the responsible groups participating in the meeting understand the overall design and the superficial design content of each core department, and they can raise questions about it.

This is not to finalize the design directly, but to finalize the overall structure of the design. In terms of details, there will be a special team in the follow-up, just like the 'quality inspection department', who will continue to carry out demonstration work to prevent problems in design and manufacturing. .

The design justification report will officially begin.

Zhao Yi took the members of the design team to the stage and gave a brief introduction to let everyone know the person in charge of the relevant design section.

The four core members of the design are Zhao Yi, Li Jianming, Yu Xin and Bao Enhong.

Zhao Yi, needless to say.

Li Jianming is the most capable in the design team and also the one who understands design best.

Yu Xin contributed the most to the design. During the design process, several of his cabin designs were directly adopted.

Bao Enhong is incidental. She is very gentle and eloquent, so she acts as the "external spokesperson" of the design team. She is almost the type of press officer, responsible for answering simple questions in meetings.

The meeting begins.

The rest of the design team walked off the stage, leaving only Zhao Yi alone, and the big screen on the stage showed the conceptual drawing of the spaceship.

This concept map was drawn by Zhao Yi himself, and it also filled with colors and rendered the background. It looks like a picture in a science fiction movie, but the picture is unique.

The blueprint displayed on the screen looks like a large UFO below, but the overall shape is a triangular cone.

The spaceship consists of three layers.

At the bottom is the UFO shape supported by a large anti-gravity device.

Zhao Yi explained, "The anti-gravity device on this layer is composed of two layers, the inner and outer layers. The outer layer of the device wraps the entire spacecraft, and the anti-gravity barrier propped up can cover the entire spacecraft, thereby realizing space travel."

"The anti-gravity device in the inner layer can only cover the lower plate of the spacecraft, and does not have the function of supporting the anti-gravity barrier. It has two functions, one is to drive the spacecraft to lift off and land, and the other is to isolate the planet. gravitational effect."

"For example, if we want to fly out of the solar system and turn on the device with our backs to the sun, we can isolate the gravitational effect of the sun. The same is true for other planets, such as Jupiter, or other large planets, the gravitational effect is still very large, it will Affecting the navigation route in the universe."

After continuously introducing the core technical framework of the bottom layer, it directly transitioned to the middle layer, "This layer has a standard circular structure inside, which is a nuclear fusion device, and the outer layer has a large generator and power plant. extend and cover half the spaceship's wings."

"The outer layers of the two wings are mainly composed of solar panels for energy supplementation and energy security."

"At the same time, propulsion devices will be installed at the ends of the two wings to control the direction of the spacecraft."

"The nuclear fusion device is installed in the center, mainly considering the convenience. Initially, we had two designs, and finally adopted the design in the center, because the parallel design will affect the coverage of the anti-gravity barrier, and it will also Extend energy delivery."

Finally, there is the third layer.

"Z-wave device."

Zhao Yidao, "The uppermost layer is the Z-wave generator. Our design uses a compressible nickel-aluminum-iron alloy plate as the front section of the Z-wave generator to increase the width of the Z-wave coverage and improve the safety of space shuttles. .”

"The strength of the compressed Inconel sheet is so high that it can withstand ultra-high-strength impacts."

"The lowest level—"

After introducing the core technical device, Zhao Yi turned to the bottom of the spacecraft, that is, under the large anti-gravity device, which is a part supported by a half oblate, "This is the cabin and material warehouse. The cabin is mainly used to carry Small spaceships, in our design, the spaceship will have eight compartments, loaded with eight small spaceships with different functions."

"At the same time, the outer layer of the cabin and the energy and power layer of the second layer also have a weapon system on the periphery. The structure of the specific weapon system needs to be designed and assembled later."

In fact, the weapon system is not important, it can only be said to have 'symbolic significance'.

Because the first spacecraft is manufactured, it is impossible to fly outside the solar system, let alone use it to find aliens.

If it is only for the earth, the spacecraft is really overkill.

Zhao Yi finished introducing the whole in one breath.

He introduced a lot of content. In fact, he only talked about the core technical components. The introduction of the core technical components only talked about the appearance, important functions and so on.

This is the most superficial part of the design. If you have an understanding of related technologies, it is almost clear from the shape.

What comes next is the key.

Several leaders of the technical group, including Li Jianming, Yu Xin and others, came to the stage to explain the design of each part, so that the participants can understand the design of each part before they can participate in the design demonstration.

Chapter 624 Is this a self-destruct?

The spacecraft design demonstration meeting officially begins.

Nearly 500 people participated in the meeting, and about 400 people directly participated in the demonstration work, each of whom can be said to be a well-known person in various fields.

It is definitely the first time in recent decades that so many academics from various disciplines have gathered to demonstrate a design project.

When they really put themselves into the design demonstration work, they found that the design of each part of the spacecraft was very delicate, and each part was a very remarkable design when it was taken out individually.

So many exquisite designs, and very exquisite collocation together, together constitute the structure of the entire spacecraft.

"The spaceship design team is really amazing!"

"This is not just a design, but a gigantic project!"

"The project is perfect, and it is not easy to find any mistakes."

"It's the first time I've seen such an exquisite design content. It's worthy of Academician Zhao's handwriting. It's really unimaginable."

"What's even more unimaginable is the time. I think it took a large team several years to complete such an exquisite design, but they only took less than three months."

"It is said that the funds spent are very small, and it is purely made by a group of people working overtime."

"Amazing!"

Everyone who really participated in the demonstration work was very shocked. The more they understood the design of each part, the more surprised and shocked they were.

In the next week, the various groups in the demonstration meeting were full of exclamations, and it would be a little strange when there was no surprise.

It has become a very remarkable thing that a certain group can find some problems in the design, and it will even be talked about by others in the demonstration group.

After a week of continuous work, the design demonstration work is all over.

In the process of design demonstration, some design problems can still be found. In each part, several problems can be found, but all of them are only minor problems. Well, it doesn't affect the spaceship as a whole.

The main reason for the existence of these problems is that the workload is too large and involves too many technical aspects.

Zhao Yi is not omnipotent.

There are too many technologies involved in the spaceship, and the design alone is extremely complicated. He is mainly responsible for the structure of the overall design, combining the parts designed by each group in the best way, so that the entire system can run smoothly. run.

In the design of each part, Zhao Yi will also check to find out the big problems, but for some small problems, especially the more technical problems, it is not easy to find them.

Therefore, there are still some flaws in the design of each part.

However, the flaws do not conceal the virtues.

The design demonstration meeting of the spacecraft ended, and the design was officially approved at the same time.

-

With the design, there is the technology.

The next step is to finalize the project. Everyone knows that the project will definitely be finalized, but the way to proceed still needs to be discussed.

The previous meeting has decided to involve other agencies, so that a more complete spacecraft can be produced in a shorter time and with less money.

Therefore, the following meetings will discuss international technical cooperation and several technologies that must be focused on in the process of cooperation.

Zhao Yi participated in the meeting and expressed his views on the latest technology.

His opinion is very important.

The latest technologies are all directly related to Zhao Yi, and only he can clearly grasp the relationship between the latest technologies.

In the end, the meeting decided to focus on the three core technologies, which is a little theoretical basis and cannot be disclosed to the outside world.

The three core technologies include space connection technology, anti-gravity barrier technology and Z-wave technology.

Of course, controllable nuclear fusion technology cannot be leaked, but in fact, the main application of controllable nuclear fusion technology is anti-gravity technology and anti-gravity barrier technology.

In the process of realizing controllable nuclear fusion, another core technology is the manufacture of compressed materials, and compressed material technology is directly related to Z-wave technology.

Therefore, as long as the three core technologies are not leaked, it is completely sufficient.

The theoretical basis of the three core technologies is not leaked, which is the bottom line of cooperation with other organizations. During the manufacturing process of the spacecraft, other organizations can even be allowed to visit components such as Z-wave devices and nuclear fusion devices. They just see the components, or I saw the process of component manufacturing, but without theoretical support, it was meaningless at all.

After the meeting finalized the technical confidentiality bottom line for the cooperative construction of spacecraft, the "Spaceship Engineering Manufacturing Company" was established immediately, and 800 large companies such as Aviation Group, Machinery Manufacturing Corporation, and Engineering Manufacturing Company jointly injected capital. [-] billion RMB.

At the same time, the news of the establishment of the spacecraft engineering and manufacturing company was also publicly announced by the official statement--

"Warmly celebrate the official establishment of the Spaceship Engineering and Manufacturing Company, with an initial capital of 800 billion yuan. The company will be responsible for the spacecraft engineering project."

"At the same time, the spaceship company welcomes the cooperation of international organizations to jointly participate in the manufacture of the first human spaceship, and contribute to the human beings stepping out of the earth and into the universe!"

The official announcement immediately caused a sensation in the world.

There was news before that the spacecraft project will be launched in China, but because there is no official news and no big media reports, many people think it is fake news. They think that even if the spacecraft is manufactured, it will definitely be in the next ten years. , 20 years later.

Now the official has directly announced that a spacecraft engineering and manufacturing company has also been established, which is tantamount to directly explaining the start of the spacecraft manufacturing project.

This is indeed a big project, some beyond imagination.

At the same time as the official announcement, a design drawing of the spacecraft was also posted.

This is a logical concept map, but the concept map is standard, the names of the various parts of the spaceship design.

The design drawing of the spaceship immediately aroused heated discussions. Anyone who has an understanding of the latest technology can understand the content of the logical concept drawing.

"The generator device on the top ignores the space shuttle technology. It is the same as the one installed in the space, except that there is something more pointed at the front, which looks like wings to be unfolded."

"The middle part is marked as an energy power cabin, which should be a nuclear power plant. I don't know if it is a nuclear fusion device or a nuclear fission device?"

"Didn't you say it some time ago? The nuclear fusion experiment was successful. Although it only lasted for seven hours, it will definitely last longer in the future, maybe it can reach several months."

"Nuclear fusion and nuclear fission are different. There is no waste in nuclear fusion, the radioactivity is very small, and it is easier to replace the fuel. As long as it can last for more than two months, in theory, it can continue forever, because halfway It can be refueled continuously, of course, not as simple as refueling a car, but not as complicated as a normal fusion reactor."

"It means that the country will soon have a mature controllable nuclear fusion technology, but I don't know the cost of using it!"

"If it can be placed on a spacecraft, the higher cost is acceptable. The most important thing is that this technology can drive the manufacture of spacecraft."

"The lowest level is the large personnel cabin, which must include a large anti-gravity device."

A lot of discussions in the public opinion have almost analyzed the structure of the spacecraft.

A conceptual drawing of a spaceship, which is also considered a standard model for future spaceships.

In fact, the concept map of the spaceship does not look perfect in appearance. Compared with the spaceships in some science fiction movies, it is still inferior in appearance.

However, this concept image is very real, and the function of each part is obvious.

After seeing the official content, many international organizations hope to participate in the spacecraft engineering project, because the spacecraft engineering project will definitely include some latest high-tech, which they do not have , even from the theoretical basis is not understood.

It would have been better if there was no spaceship project. After the spaceship project, not participating would be tantamount to lagging behind. Other participating institutions, no matter in terms of technology or theory, will definitely improve a lot.