Shenhao starts with bragging about paying taxes

Li Tianyu asked Lu Hui to arrange several trained technicians to start up the lithography machine.

In doing so, it is also convenient for these chip technology experts to check various parameters.

Chapter 598 The strongest lithography machine, none of them

Since the lithography machine system is composed of hundreds of thousands of parts, the volume is quite large.

When it was transported, there were [-] centralized boxes, large centralized boxes.

According to what Lu Hui told Li Tianyu later, the lithography machine system was shipped in two batches, and the formation was quite spectacular.

Don't be surprised, it's not that much.

ASML's lithography machine system is said to be composed of more than [-] parts. If it is packed into a large centralized box, it will take [-]!

That's right, you heard it right, forty large centralized boxes.

Since this is the lithography machine recommended by the system and it is produced by the "mysterious X company", it should be regarded as the most advanced lithography machine system in the world.

In other words, the lithography machine system of the mysterious X company is more upscale than ASML's most advanced lithography machine model.

Moreover, the volume has also been optimized a lot, and it is not as huge as ASML's lithography machine.

Of course, it is difficult to explain how big the performance gap between the two is.

In short, ASML's lithography machine system can achieve a 3nm process at its limit.

As for the lithography machine system produced by the mysterious x company, the limit can reach a process of 1 nanometer.

This is actually very remarkable.

After the chip nano-process technology reaches below 10 nanometers, it is very difficult to make exponential efforts every step of the way. After all, this kind of chip manufacturing has physical limits.

If someone knowledgeable knows that Guanglan Electronics has obtained a lithography machine that can help produce 1nm process chips, they will definitely jump on the spot.

Closer to home, since the volume of the lithography machine system is too large and requires a special working environment, the installer isolated a separate area for the installation of the lithography machine system equipment.

Anyway, the area of ​​this area is quite large, a lap or two larger than a standard basketball court.

When the inspection team entered this area through a security door, it felt like entering a sci-fi space.

The lithography machine system equipment produced by the mysterious x company is quite sci-fi in appearance. Although the volume is very large, it does not make people feel very bulky.

The visual impact of this first glance was so powerful that most people were shocked, wondering if they had come to the equipment bay of a spaceship.

However, the four talented chip technicians all showed puzzled expressions.

It is certainly not false to say that they are awesome.

In fact, Wei Chao, Jiao Dagong, Liu Xingshan, and Hu Shaoming are all key members of the team, especially Wei Chao and Jiao Dagong. I have visited the production plant of the factory, such as TSMC.

So all four of them have seen lithography machines, except for ASML's lithography machines, the others are Nikon and Canon lithography systems.

There are indeed other brands of lithography machines, but they almost stay in the laboratory or legends, and they have never seen them anyway.

However, the lithography machine system of Guanglan Electronics made them confused for a while.

It's definitely not from ASML, nor from Nikon, or from Canon. Whose is that?

Could it be from an unknown brand-name company?

At this time, Jiao Dagong laughed: "Mr. Li, the lithography machine of Guanglan Electronics is really useless!"

Li Tianyu's expression froze and he didn't speak.

Xia Lei showed a look of surprise: "Jiao Dagong, why do you say that? Is this lithography machine wrong?"

Jiao Dagong: "Let's not talk about ASML. It has nothing to do with mid-to-low-end brands like Nikon and Canon. Is it made by some counterfeit manufacturer?"

Xia Lei looked at Lu Hui, then set his eyes on Li Tianyu's face.

To be honest, everyone knows that the lithography machine system is difficult to operate, so Xia Lei can accept that Li Tianyu is not ready for this.

However, Xia Lei still wanted to hear Li Tianyu's explanation.

Li Tianyu said with a smile: "Mr. Xia, this is indeed not the lithography machine of ASML, Nikon and Jiatong, but I can guarantee that the lithography machine system we got from Guanglan Electronics is the most advanced in the world. One of them, not one of them.”

Li Tianyu's words surprised everyone present, except of course Lu Hui.

In fact, Lu Hui was also confused like this at the beginning, but after his own understanding, he has completely calmed down.

Li Tianyu's words were indeed like bragging, but in fact there was no water at all.

At least from the perspective of equipment parameters, it can directly kill ASML's latest lithography machine system in seconds.

Of course, comparing parameters is useless, it is really cool to use it in practice.

In fact, the technicians who came with the machines also gave Lu Hui an operation demonstration on the spot, and specially trained some employees of Guanglan Electronics to operate these machines.

Although Lu Hui has never really seen ASML's lithography machine, but just looking at the operation of the one in front of him, he feels that it is very good.

At this time, Jiao Dagong laughed loudly: "Mr. Li, if you want to say something else, we may believe it, but if you say that this is the strongest lithography machine system, it is a bit too much."

Li Tianyu said lightly: "When our LCD panel of Guanglan Electronics went to participate in the exhibition, the people from Samsung Electronics told me the same way."

Everyone was stunned.

The LCD panel of Guanglan Electronics, especially the foldable flexible screen, has already made a name for itself, and many news media call it "the strongest on the surface".

Although there may be some elements of flattery in such rhetoric, as long as you pay attention to it, you can know that now Guanglan Electronics is Huawei's S-level supplier.

The strictness of Huawei's supplier standards is well-known in the industry. If Guanglan Electronics does not have two brushes, it will not be able to do it at all.

Jiao Dagong reacted, and smiled again: "Mr. Li, but lithography machines, chip manufacturing, and screen panels are two different things."

Li Tianyu said nothing, but glanced at Lu Hui.

Lu Hui said with a smile: "Everyone, our staff will be here soon. We will put this lithography machine system into operation, and you will know after a look."

When everyone heard it, they were all stunned.

Is this the rhythm of a live demonstration?But the production line is not connected yet.

Li Tianyu nodded with a smile: "Mr. Xia, there are a few technical guys, I believe you will not be disappointed."

Just then, several people came in.

They are also wearing dust-proof clothing, but the color of the dust-proof clothing is different from that of the "investigation team".

Lu Hui: "They are technical workers who have undergone operational training and will give you some demonstrations."

Most of the people at the scene were confused and did not understand how they would demonstrate.

Only Wei Chao, Jiao Dagong, Liu Xingshan, and Hu Shaoming, the four technicians, are knowledgeable people, and they have long been watching these workers busy.

In fact, the so-called demonstration is not just a simple boot.

This set of lithography machine system produced by "mysterious X company" is very complex and precise, and it also has many incredible functions.

Such as simulated production demonstration system.

In this way, people can intuitively see the working status, working principle and production speed of the machine through the screen.

Moreover, there are very detailed parameters and adjustment interface, allowing the operator to observe and adjust very conveniently.

To be honest, this sounds a bit like playing a game, but as the saying goes, laymen look at the hot spots, and experts look at the way.

Wei Chao, Jiao Dagong and others looked at it for a while, and then showed quite surprised expressions.

And as the demonstration of the lithography machine system proceeded, the look of surprise on his face became more and more "serious" and exaggerated.

After a while, Jiao Dagong murmured: "No, it's impossible, the efficiency of this photolithography system will be so high? Yes, will there be any tricks?"

Wei Chao became a little excited: "Brother Jiao, do you know what this means? The precision of this photolithography system exceeds ASML! And it can also serve many production lines at the same time!"

Jiao Dagong was startled, and quickly shook his head again: "I don't think it's possible, how can the current technology be so advanced, it should be fake!"

Wei Chao immediately pointed to a debugging screen and said: "I, I think this is true. You can see that these parameters are close to normal values. If it is fake data, it cannot be so accurate!"

While Wei Chao and Jiao Dagong were arguing, Liu Xingshan and Hu Shaoming also checked the working status of other components.

The expressions of these two people are very strange, and there is a little bit of disbelief.

Obviously, they can't see any flaws at all. This lithography machine system is almost perfect, surpassing ASML's similar products.

Of course, Xia Lei was also observing the reactions of the four of them, feeling more and more that this light blue electron, no, Li Tianyu is not simple.

But Xia Lei didn't bother the four technicians, and they needed more time to identify the authenticity.

It took a full hour for the four technicians to temporarily end the "inspection". They almost checked all the equipment in the lithography machine system, no, several times.

Wei Chao, in particular, has completely entered a state of ecstasy.

If Xia Lei hadn't reminded them to "call it a day", Wei Chao would probably be fine staying here for a few days.

After the visit is over, the next thing becomes simple.

Li Tianyu planned to invite Xia Lei and others to the nearby big restaurant and treat them to a lunch.

But Xia Lei smiled and said, don't worry about lunch, let's go to Langzhou City to eat.

Li Tianyu was stunned: "Eat in Langzhou City?"

Xia Lei: "Yes, I have arranged lunch. There is a game restaurant in Langzhou City. Let's go there to eat. It's not far away, and we'll be there in a while."

Since Xia Lei made such an arrangement, Li Tianyu agreed.

Anyway, I have friendship with Xia Lei, so I don't need to be too polite.

Chapter 599

Xia Lei took the initiative to arrange a big meal, which surprised Li Tianyu.

Logically speaking, Xia Lei brought a team to Guanglan Electronics for inspection, even if Li Tianyu was the host, there was no reason for Xia Lei to worry about it.

In fact, Xia Lei was also happy today, and asked his assistant to arrange this meal temporarily.

Why are you happy?

Although the four chip technology experts called by Xia Lei haven't come to a final conclusion, but according to Xia Lei's judgment, the chip manufacturing line of Guanglan Electronics should be fine.

As for the lithography machine system, there are indeed some doubts, such as what is the brand of this lithography machine?

Li Tianyu never answered this question directly, but explained that Guanglan Electronics ordered it from a partner.

That partner has a close relationship with Li Tianyu, but it needs to be kept secret.

Xia Lei wondered, could it be a lithography machine secretly developed by a large multinational technology company?

But Xia Lei is only an investor, but he has more contact with the technology circle, no matter how he thinks about it, he can't think of any technology giant whose technology can surpass ASML.

Now even if Nikon and Canon add up, I am afraid that they cannot surpass ASML. After all, the advanced lithography machine technology now requires the cooperation of many high-tech manufacturers in the world.

However, Xia Lei can also see from the reactions of Wei Chao, Jiao Dagong and other four people that the lithography machine of Guanglan Electronics is definitely not some unusable brand-name machine or copycat machine, but the specific performance needs to be further understood. just work.

In short, Xia Lei is quite at ease with Li Tianyu's character, and feels that he is not a person who just talks about it.

Li Tianyu said that the lithography machine system of Guanglan Electronics is the most advanced in the world, not one of them.

This is indeed an exaggeration, but even if there is a lot of water, the actual performance and efficiency are not as good as ASML's latest model, as long as the level is close to it.

At present, the most advanced SMIC in China can handle the 28-nanometer chip manufacturing process, and the [-]-nanometer chip can barely do it.

Not to mention anything else, if Li Tianyu's light blue electronics can reach the level of fourteen nanometers, then Xia Lei will be able to admire Li Tianyu completely.

Therefore, when Xia Lei arranged this meal, he also took the initiative to show his favor to Li Tianyu.

In fact, Xia Lei used to show affection to Li Tianyu from time to time, but at that time it was only in words, mostly because of Ai Baoquan's face.

But now it's different, Xia Lei plans to make friends with Li Tianyu and cultivate a relationship, so that the next thing can be discussed.

Counting Wei Chao, Jiao Dagong, Liu Xingshan, and Hu Shaoming who drove here before, Xia Lei also has four cars.

There is not much need to go to Guanglan Electronics, Li Tianyu, Lu Hui, and several key leaders of Guanglan Electronics have gone. Anyway, Lu Hui found a minibus and went there.

Li Tianyu thought about going home after dinner, he was too tired during this time, so he asked Xia Lei for the address of the restaurant, and drove the Porsche Cayenne by himself.

The game restaurant that Xia Lei mentioned is indeed in the urban area of ​​Langzhou, but it is in the suburbs of the city.

But this place is not desolate, because it is close to the development zone and the city center, and not far from several local scenic spots in Langzhou, so there is still a feeling of high-rise buildings here, and they are all new buildings.

As for the venison restaurant, there is a very arrogant name called Lu Ding Ji, and it is indeed a time-honored restaurant. It is a two-story restaurant located in the middle of high-rise buildings.

This building is quite old, somewhat similar to arcades in the south, it is a miracle that it was not demolished.