Shenhao starts with bragging about paying taxes

Manufacturer: Canon Japan

Tax amount: 680000 yuan soft sister coins

Equipment name: Lithography all-in-one machine

Equipment function: silicon wafer chip manufacturing

Operation mode: fully automatic

Production accuracy: 3 nanometers

Production company: Asmanidland

Tax amount: 725000 yuan soft sister coins

Equipment name: Lithography all-in-one machine

Equipment function: silicon wafer chip manufacturing

Operation mode: fully automatic

Production accuracy: 1 nanometers

Manufacturer: Mysterious X Group Company

Tax amount: 988000 yuan soft sister coins

There are five pieces of information on one page, all of which are full.

That's right, all are lithography machines.

There are many types of lithography machines, and only the silicon wafer chip manufacturing type is shown here.

This is also Li Tianyu's special request to Li Tianyu.

Li Tianyu carefully browsed the system order list. According to the usual practice, they are arranged from low-end to high-end from top to bottom.

Just like the rumors, lithography machines are produced in Germany, Japan, and the Netherlands.

There should be other countries, such as the United States of America, but they are not shown.

Either it needs to be refreshed, or it may be that the share of lithography machines in those countries is too low, so it is not worth mentioning.

The ones made in Germany are relatively low-end, and there are still manual models. Of course, the tax required is quite low, only more than 20 soft sister coins.

The latter ones in Japan and the country are relatively better. There are semi-automatic and fully automatic ones, namely Nikon and Canon.

Both companies are giants in SLR cameras and optical equipment, and of course their attainments in lithography machines are not too low.

In fact, in the 80s and [-]s, the angry lithography machines of these two Japanese companies occupied an absolute dominance in the world.

However, due to some very complicated reasons, ASML in the Netherlands was supported and gradually left behind Canon and Nikon in the lithography machine business.

So now ASML's lithography machine should be the most advanced lithography machine in the world.

The latest ASML lithography machine can theoretically break through the technical limit of 3 nanometers.

In contrast, Canon and Nikon basically can only stay at 28 nanometers, without any progress.

Of course, ASML's lithography machines will not be in stock. They are all produced after orders are placed by large companies, and they can't produce a few units a year.

Small business want to buy?That's no way.

At present, domestic enterprises have no channels to obtain ASML lithography machines from the Netherlands.

Li Tianyu couldn't help smiling when he saw ASML's lithography machine.

It seems that the bragging tax system is indeed quite awesome. Impossible things are not a problem in front of the system.

The taxes and fees are indeed a bit higher, reaching 72 soft sister coins.

However, to Li Tianyu, it was nothing at all.

But why didn't Li Tianyu choose it, because there is the last item, which is the fifth item.

The physical manufacturing limit of this last lithography machine has reached 1 nanometer, which is higher than ASML's lithography machine!

You know, with the current level of chip manufacturing technology, every step is very difficult when it reaches below 7 nanometers.

1 nanometer, according to the current technical level, I dare not even think about it!

Which manufacturing company is so awesome?Actually produced a lithography machine that can manufacture 1-nanometer technology chips.

Li Tianyu was stunned when he saw it.

The mysterious X Group, what kind of ghost company is this?

Li Tianyu remembers seeing this company in the system list before, when he wanted to get an improvement plan for a foldable flexible screen.

In any case, the tax amount is more than 99 yuan, almost reaching 100 million soft sister coins.

Since there are better options, ASML's lithography machine should stand aside.

Moreover, it may successfully avoid technological blockades from foreign countries, especially the United States.

What else to say, hurry up and pay the tax, so as not to have long nights and dreams.

Tax Payment Information

The deduction of 988000 yuan soft sister coins was successful

item information

Lithography all-in-one machine, the mysterious x group company has achieved success

Li Tianyu breathed a sigh of relief.

The most difficult lithography machine is finally done.

Although the mysterious X Group company is a bit like a copycat company, but Li Tianyu paid 100 million soft girl coins in tax anyway, presumably the system will not fool him with poor quality and poor quality things.

Then, Li Tianyu began to arrange other equipment.

In addition to lithography machines, etching machines are also very important equipment, and the price is also quite high, costing several hundred million U.S. dollars.

However, relatively speaking, the etching machine has more options.

Li Tianyu took care of all the big items in one go.

Although not much, it took nearly an hour.

I'm so drained of energy, I can hardly move when I'm spread out on the sofa.

To be honest, Li Tianyu feels that using the system consumes energy.

Li Tianyu opened a can of beer, drank a few gulps, suppressed his shock, and finally recovered a little.

At this time, Li Tianyu suddenly thought that when the machinery and equipment of the production line arrived, there would be no place to put them.

To be precise, new factories are needed to install wafer chip production lines.

This is not a small matter, Li Tianyu immediately called Lu Hui.

Lu Hui seemed to be busy and didn't answer the phone.

Li Tianyu didn't call anymore, just watched TV there.

After a while, Li Tianyu's cell phone rang, and it was indeed Lu Hui who called back after seeing the missed call.

Lu Hui: "Boss, did you call me?"

Li Tianyu: "Yes, what are you doing, kid? Are you doing something serious?"

Lu Hui: "Boss, I'm just doing business. I was in a meeting just now."

Li Tianyu said "Oh": "By the way, I called me to ask you something."

Lu Hui: "What's the matter? Tell me."

Li Tianyu: "Is the new factory built soon?"

Lu Hui: "Where is Guanglan?"

Li Tianyu: "Anywhere is fine."

Now Lu Hui is doing a lot of construction work, and Jiaxin and Guanglan Electronics are building new factories.

This is also normal. After all, the orders of the two factories have increased sharply recently, and the benefits are extremely good.

So now there is an urgent need to expand new factories and strengthen production lines to ease production pressure.

Lu Hui: "Two factory buildings on Guanglan's side are about to be completed, and they are currently undergoing interior decoration."

Li Tianyu: "When will it be finished?"

Lu Hui was at a loss and didn't understand what Li Tianyu was going to do, but he still responded: "If you hurry up, the work can be completed next week."

Li Tianyu: "Reserve a factory building, I plan to launch a new production line."

Lu Hui was stunned: "New production line? Boss, what production line? Or LCD panel production line?"

Li Tianyu: "Of course not, it's a silicon wafer chip production line."

Lu Hui didn't react for a while, and after a few seconds, he let out a loud "ah".

Lu Hui: "Boss, are you, are you crazy!?"

Li Tianyu: "You're crazy! It's not big or small."

Only then did Lu Hui suppress his restless emotions, calm down, and said, "I'm sorry, boss, I'm too excited, no, what you said is true or false?"

Li Tianyu: "Nonsense, of course it is true. This is to talk about business. Why should I tell you lies?"

Lu Hui: "Chip production line?"

Li Tianyu: "Chip production line."

Lu Hui: "What, what specifications? Boss, I, I mean, I want to ask, how many nanometer chips can be produced?"

Li Tianyu: "Comrade Xiao Lu, do you think I will build some obsolete production lines? Even if you don't say anything, I think it will take up space."

Lu Hui: "Then what do you mean?"

Li Tianyu: "If you use it to the limit, you can reach a 3-nanometer process."

Lu Hui was silent for a long time, longer than before, as if he had passed out.

Li Tianyu: "Hey, Mr. Lu, are you still there? Could it be that you have gone to another meeting?"

Lu Hui: "No, no, boss, when will the production line you mentioned arrive?"

Li Tianyu: "It should be soon. Anyway, you try to get the factory ready next week and be ready to receive machinery and equipment at any time."

Lu Hui: "Okay, boss, don't worry, I will definitely let the construction team work overtime, and if it doesn't work, I will pay more for overtime."

Now that the profits of the two factories are improving, Lu Hui is also full of confidence. After all, there are real money in the financial account, which is more effective than anything else.

Li Tianyu: "Don't let too many people know about this matter, just let some core people know about it."

Lu Hui understood that this matter was indeed of great importance, so he immediately agreed.

The establishment of a wafer factory is a big event. If the news leaks without proper preparation, it may have a serious impact on future development.

Li Tianyu chatted with Lu Hui some more, then said goodbye and hung up the phone.

With everything under control, Li Tianyu finally felt relieved.

Next, wait for the machinery and equipment to be in place, install the silicon wafer chip production line, and then find a way to find a team of wafer chip experts, so that the work can start smoothly.

By the way, Li Tianyu just remembered the bet he made with Xia Lei.

At that time, you can talk to Xia Lei, put him over to the factory, and let him see if this is a top-level silicon wafer chip production line.

As for whether the chip technology research and development team that Xia Lei mentioned exists, Li Tianyu is not worried.

Xia Lei's network is quite wide, and a person of his status would never brag or talk water under normal circumstances.

Because there are thousands of eyes staring at Xia Lei.

Moreover, Xia Lei is actually happy to see the success of Li Tianyu's establishment of a silicon wafer chip factory.

why?

Because Xia Lei is an investor, and one of the top investors in the country, if there is a promising chip factory in front of him, can he stop investing money?

So Xia Lei is provoking Li Tianyu to make a big move. If Li Tianyu is really successful, then the R&D personnel, R&D team, etc., Xia Lei will definitely support it with all his strength.

Li Tianyu pondered that Xia Lei would definitely discuss cooperation matters with him at that time.