Good luck! This village is full of billionaires

Rainbow TV.

In a large studio.

The host, Susan, asked curiously: “Village Chief Fang, can you tell us more about the photolithography factory?”

At this moment, Susan couldn’t help but be curious.

Netizens in major cities across the country are very curious.

After Rainbow TV became a star, its ratings topped the country and became people’s favorite TV station.

This time’s special program.

There are tens of millions of viewers watching.

Through previous popularization.

The audience already knows the importance of chips and high-end lithography machines.

Now…

Village Chief Fang Yun proposed a new idea for the photolithography factory, which undoubtedly made many people’s eyes brighten.

on the screen.

Fang Yun slowly said: “The lithography factory plan, namely SSMB, has always been one of the four routes of lithography technology. Western countries have long proposed it. Because this plan requires the country to have a

high degree of scale and industrial chain Western countries have not adopted this solution.

However, Xia Guo has the conditions to successfully implement this solution.

The photolithography factory is a mechanism that can liberate its own potential.

For example, you need 100 photolithography machines. Then it is reasonable to build a photolithography factory.

But if only one photolithography machine is needed, then establishing a photolithography factory is equivalent to wasting 99% of the production capacity, and the cost of the chip will be difficult to reduce. By the same token,

if these 100 photolithography machines The chips produced by the engraving machine will be sold to the domestic market, that is, free trade, so there is no problem in establishing a photolithography factory. 843

But if your chip customer is a foreign company, then frequent waste of production capacity will lead to rising costs, thus forming a buyer’s market. Foreign customers will deprive you of your profits.

What’s clever is that more than 60% of the world’s chips are purchased by Xia Guo companies.

This also makes only Xia Guo capable of establishing photolithography factories and realizing true free trade.

Therefore, for Xia Guo In other words, a chip is a product with huge added value.

A 20-yuan chip is not only related to the cost of the chip, but also determines whether a 10,000-yuan car is market competitive.

These are special features that other countries do not have. conditions.

Other countries have never considered adopting this route, and their negative publicity mainly focuses on the difficulty of photolithography machines.。”

“I see! ”

Susan nodded in realization.

Fang Yun continued: “The Dutch Asmer company inherited all the parts in a cabinet, because they sell goods to the whole world, and all the lithography machines must be miniaturized. change.

But we can think divergently and directly build a large workshop with a large laser accelerator.

No matter if it is circular or linear.

Anyway, there are plenty of places.

As long as it is large enough, it can produce sufficient power or even (cdeg) stronger light source.

This is equivalent to the difference between a printer and a printing house.

What we want is chips, from scratch.

It doesn’t matter whether it’s made from a box or from a factory.

If we can’t break through the miniaturization of light sources, so what?

Anyway, Xia Guo has no demand for exporting high-end chips, so it will follow the factory’s method.

Who said that photolithography machines must look like them?

This is the difference between scientific research thinking and engineering thinking.

And precisely in the past few decades, we have developed rapidly, and the best thing is to engage in engineering! ”

Hearing this,

the audience in front of the TV all understood.

Since Xia Guo can’t make integration and miniaturization, then do it normally, and if it doesn’t work, make it bigger! If

the parts can’t be squeezed in, they will be laid flat.

Dutch Aspen Maier built a big cabinet, and we built an assembly line. It ‘s

like a CNC machine tool .

When we didn’t have one, how did we build it?

A lathe, a milling machine, a planer, and a grinder, all of them can meet the standards.

It’s a CNC machine tool.

We built it in one set. It can be done with a workshop.

The photolithography machine factory that Village Chief Fang Yun said, that is, the photolithography

assembly line, requires a super-large workshop. How much space does it cost? If we can’t

make a water heater, we can Build a boiler room.

If we can’t build a treadmill, let’s build a stadium.

The principle is actually the same!

At this time, Fang Yun said: “Currently, Rainbow University has invested in the construction of steady-state micro-clustering in the West Coast New Area (SSMB) Extreme Ultraviolet Light Source Facility.

The SSMB light source will be made into a large ring, turning the traditional photolithography machine into a photolithography factory.

The facility uses a laser with a wavelength of 1064 meters to control the electron beam in the storage ring MLS in Berlin, making the electron beam run around a circle with a circumference of 48 meters to form a fine microstructure, which is a micro-bunching.

Micro-bunching radiates high-intensity narrow-bandwidth coherent light at the laser wavelength and its higher harmonics. The experiment is to verify the formation of micro-bunching by detecting this radiation.

As a new generation of accelerator light source, steady-state microbunching, based on the SSMB principle, can produce high-power, high-repetition frequency coherent light, with wavelengths covering the terahertz to extreme ultraviolet bands, and proposes a new chip manufacturing method. , which subverts the limitations of traditional photolithography technology and is an innovative technology for future chip manufacturing technology. (To read Baoshuang novels, go to Feilu Novel Network!) The

light source generated by it can be continuously screened to obtain beams of different specifications of 5nm, 4nm, 3nm, 2nm and 1nm, and then connected to photolithography machines of different specifications.

In this way, we can produce chips with different processes from 5 nanometers to 1 nanometers.

ASML’s EUV engraving machine in the Netherlands is equivalent to using extreme ultraviolet light with a wavelength of only one ten thousandth of the diameter of a human hair to engrave circuits on a wafer. It can produce tens of billions of transistors on a chip the size of a fingernail. This kind of The equipment technology can be said to be the top level of mankind in this field.

Our lithography factory can achieve a stable high-power light source, accelerate electrons to close to the speed of light, and produce short-wavelength, high-power light sources to improve the chip manufacturing process. It can be said to be a brand-new manufacturing process.

Once the lithography factory is officially built.

The era when ASML in the Netherlands dominated the world with one hand will be gone forever.

As the only country in the world with a full industrial chain, Xia Guo can only use the chips produced by the photolithography factory for its own use and export.

Of course, before the lithography plant is built.

Rainbow Semiconductor Group will also study photolithography machines in a traditional way.

Both aspects go hand in hand.

We have reason to expect that Xia Guo’s lithography machine field will usher in new breakthroughs! ”

The words fell.

Susan nodded heavily.

Whether it is a lithography factory or a miniaturization of lithography machines.

She believes that Xia will eventually have high-end chips!

……

After the program airs.

One pass, ten, a hundred.

The “photolithography factory” proposed by the village chief Fang Yun instantly became a hot search topic on the Internet.

After netizens understood the significance of the photolithography factory, everyone was shocked。[]

In the hot search comment area.

Countless people are talking about it。

“Damn it? ! Lithography factory? !”

“Oh my God! Village Chief Fang’s thinking is great!”

“Very good! After building a lithography factory, we can have cutting-edge lithography machines!”

“Isn’t it incredible? I never thought that a photolithography machine could be born in the form of a photolithography factory!”

“Haha, if we can’t build a treadmill, let’s build a stadium! Mr. Fang’s idea is so original!”

“The photolithography factory is a brand-new scientific research idea. We can try it. Who may be able to overtake in corners in the future?”

“That’s right! It’s always a good idea to try. If the photolithography factory can really succeed in research and development, it will undoubtedly subvert the entire high-end chip industry! ”.