Super Plane Mall

Chapter 33 The First Part

The special alloy was quickly transported to the side of the machine tool he bought from Xiang Luoluo in the mall. Although the processing hardness of this equipment reached 101 when he bought it, which was the same as these special metals that had just been smelted, the processing It is also very laborious, but now all the knives of this equipment have been replaced with the original knives left by this factory, because this alloy in all the super strong and super hard special metals in this factory is already considered The worst thing is, and it turns out that the formula of special alloys left in this factory exceeds the hardness of diamonds. There are more than a dozen kinds, and the highest No. Cutting tools for machine tools.Moreover, the production of this alloy is very complicated, and even after it is produced, it cannot be processed.Not to mention other things, but other alloys are not so perverted, the highest is around 150, but they can't use other metals for the time being, even if this machine tool bought by Luo Luo's civilization is replaced by the original one in the factory These tools can only process materials with a hardness of about 112 at the highest, and the machine tools will not be able to stand it, so special alloys with a hardness of more than 105 cannot be used for the time being.

Because the old man and the others did not carefully check the original materials in the factory, they did not know how many metal formulas there are in the factory, and the places where these formulas are stored are very confidential.They were all stored in several places, so it was normal for the old man and the others not to know about them. Later, Zhu Lei's parents told him on the phone.

Although this machine tool can process metals below 105 after the tool is replaced by four points compared with the original one, but when processing metals exceeding 101 in this way, the loss of the machine tool is very large, and it will be completely destroyed in a short time. It was scrapped, but fortunately, Zhu Lei and the others didn't expect this machine tool to last for a long time. As long as it can persist until Zhu Lei's own mother machine in his factory is built, it will be thankful.

When the workers transported the smelted special metals to the side of the machine tool, Zhu Lei and the others also came to the side of the machine tool, but this time it was Mr. Zhang himself who processed the special metals. For the processing of these special metals, the old man They are not worried about handing it over to other people to operate, and all the parts processed from these metals are important parts of the mother machine, and the precision required is very high. Maybe only one of the hundreds or thousands of parts can be used, which is okay. Others that are useless can be returned to the furnace.

Moreover, this machine tool is non-NC, which is more in line with the old man's taste, so that they can display their craftsman's strength. If it is CNC, then they have no choice but to rely on luck to produce it, but if it is manual, it is The processing is relatively slow, and sometimes it takes a few days to process a part, but the pass rate is relatively high. After all, non-NC machine tools test the skills of workers, and the things produced by a skilled worker will even exceed those The things produced by high-precision CNC machine tools, and the old man is the first-class among the first-class, so they are absolutely sure about these, so he hurriedly said that he would re-copy the original mother machine in half a year, this is not him Talking big, but Mr. Zhang and the others really have this strength.

The old man carefully operated the machine tool to process the parts. These parts had been cast into rough parts during the previous metallurgical process. However, even if the rough parts were cast, it would take a lot of time to process them into real parts. The sharp turning tool operated by the old man on the high-speed machine tool was squeaking and cutting off strips of metal wire in circles, making these black blanks reveal the true colors of these alloys. These alloys are not the same as ordinary alloys. Steel is also silvery gray, but the silvery gray exudes a little golden light, making these metals very beautiful, so these alloys are also called gold essence.

These gold essences are not the special metal used by the old man to forge the sword last time. The metal used last time is a very brittle but very wear-resistant metal. It is the No. [-] metal in the factory, and most of them are used in machine tools and other equipment. on the bearing.

The scraped metal scraps will be recycled in the future. After all, the raw materials of these metals are not cheap. Since the prices of the raw materials of these alloys are very high, and the storage capacity in Daming is not very large, so he was in the previous He has always wanted to purchase these raw materials in the mall, but now it is his first time to start work. In order not to cause trouble to others, he bought some at a very high price. However, he will definitely buy them in the mall in the future, because in reality, these There are too few things, and he will use a lot of these raw materials in the future. In reality, humans have not left their home planet, and the storage of these things on the earth is indeed very small.In order to save materials, these scraps must also be recycled.

Seeing the old man processing this part meticulously, Zhu Lei knew that this part could not be processed all at once. After all, this is not an assembly line processing. It would be much simpler to process each process separately, and all the processes of this part are It will be done by the old man himself, and the structure of some parts of this part is very complicated, and these parts can only be processed little by little according to the old man's feeling.Whenever processing for a period of time, the old man will stop the machine and use the precision instrument on the machine tool to test the processing place, and then turn on the machine to re-process, or process the following procedures. The processing of the old man will not be completed until the afternoon when he is about to leave work. , the old man in the middle did not rest except for going to the toilet once and drinking a little water.And the processing of this part was smoother than expected, the first one has achieved the expected level, and it has fully reached the standard on the drawing.

When Mr. Zhang wanted to pick up the next part and prepare to process it, Zhu Lei stopped him: "Grandpa is going to get off work soon, and you have been processing for a whole afternoon today, let's continue tomorrow!"

After all, the old man is now so old, and he has been concentrating on processing for such an afternoon. If there is any accident, Zhu Lei's loss cannot be made up for with a little money, and the recovery of the factory will also be greatly delayed. , and may even affect the reproduction of the mother machine, so he must not be allowed to continue today.

"Xiao Lei! It's still a while before I get off work. I want to process a little more. If it goes well in the evening, I can process another part. If the parts from the multi-processing shop come out, the master machine can be copied a day earlier." The old man said.

"Grandpa Zhang, your body is more important, and we have been waiting for so long, and we don't care about one or two days, so your body is still important. I don't want to hear that Grandpa, your body is not good when the mother machine is built. I'm exhausted, so grandpa, you must pay attention to your health. I'm still waiting for you to develop this factory into the largest military factory in the country?" Seeing the unwillingness on Mr. Zhang's face, he still wanted to continue working. , Zhu Lei immediately pulled him outside the workshop.

　Say no more!The second update today!

　　
　
(End of this chapter)