Singular Enhancement System

Chapter 322 Flying Armor No. 1

"The maximum flying speed of mass-produced flying armor is about 300 kilometers per hour. In order to ensure flexibility, except for the chest armor, other parts of the armor will use light armor, which can only defend against small-caliber firearms. Of course, if You can provide better materials, and I can make them more defensive."

"You provide me with the materials I need, and I only need 50 for each piece of armor"

"And the material I need is palladium."

After listening to Ling Feng's introduction, Qin Ya didn't reply to Ling Feng immediately. After all, this conversation was just her temporary idea, and she had to report to her superiors to confirm the specific cooperation matters.

And Ling Feng was not in a hurry, and asked her to go back and have a good talk with her superiors, and contact herself when there was a result.

"Now that I have made my statement, I have to quickly make a set of samples, which will be more convincing."

Ling Feng sat on the sofa, thought for a while, and after making up his mind, he put on the Black Dragon Flyer and entered the ninth-level trial place - the Yin Beast Building.

Three hours have passed, and the five tireless Autobots have almost collected the resources. Except for the two Autobots who are still collecting some trivial resources, the other three are now tirelessly investing in the metal smelting work in the smelting workshop In the middle, a pile of smelted metal has been placed next to the smelting workshop.

In addition, various metals are also stored in the smelting workshop, which is convenient for preparing some special alloys later.

At present, there are mainly two kinds of metals produced in the smelting workshop. One is super-hard aluminum alloy made of aluminum as the main element and added with zinc, magnesium, copper, manganese and other elements. The strength is as high as 700MPa, and its strength is even stronger than some high-strength steel Tall, and relatively light in weight, Lingfeng is intended to be used to make flying armor and the main frame of flying robots.

The other is an alloy steel plate with higher strength, which is twice as strong as the previous super-hard aluminum alloy. It is also used to make the frame and armor of robots, but because of its relatively heavy weight, it is more suitable for manufacturing Defense robots on land.

After thinking for a while, Li Yi refused the energy-filled Fire Seed Source fragments on the functional device into the Fire Seed Source fragments in his chest, restored the energy in the Fire Seed Source fragments to 80%, and then separated another piece Put the fragments on the device to recharge, so as to ensure the battery life of the fire source fragments.

Of course, this was not enough. Lingfeng used the strengthening system to create a piece of lv11 fire source fragments that were integrated into the fire source fragments to improve the performance and power of the fire source, and then began to use the alloy steel plate next to the fire source. Build a manufacturing workshop for yourself.

Due to the relatively small area of ​​the smelting workshop, the output of alloy steel plates and aluminum alloys is not high, so Lingfeng only built a mini-manufacturing workshop covering an area of ​​20 square meters for himself.

Although the sparrow is small, it has all internal organs, and the newly built manufacturing workshop is quite complete with tools. At least it should be no problem to manufacture the low-profile version of the flying armor in Lingfeng's concept.

"First, some materials need to be prepared."

Ling Feng walked to the pile of materials beside him and began to look for the materials he needed.

Since it is a mass-produced flying armor, Li Yi must ensure that its technological content is not too high, so it cannot be made by simply relying on the source of fire and aluminum alloy.

Some circuit boards, data chips, etc. are also needed to build the driver's operating system.

Things like these are not uncommon. Although they are only relatively low-level ones, Li Yi has the source of fire and can barely use them.

It took about 10 minutes for Lingfeng to create a prototype using the source of fire, aluminum alloys, circuit boards, data chips, etc.

Of course, this prototype machine, Ling Feng, cannot be handed over to Qin Ya as a model, because this prototype machine was created by using the power of the fire seed, and some things on it are too unimaginable, and Ling Feng can't let it flow out.

Moreover, the purpose of Lingfeng to create this prototype is not to use it as a model, but to create some data for the prototype of the fire source fragments. With these, Lingfeng can rely on the manufacturing workshop and Small ball recreated a prototype that was manufactured by conventional methods in all aspects of observation.

"Xiaoqiu, how is the data analysis of Flying Armor 1 going?"

"Wait a moment, sir."

The ball that has been reconnected to the [black box] is using the huge computing power provided by it to analyze the data of the prototype named [Flying Armor No. No.] manufactured.

5 minutes later
"Okay, sir. I have finished analyzing the data of [Flying Armor No. 1] and made some modifications to it. With the existing technical conditions, I can manufacture it."

"Okay, let's get started."

After getting Xiaoqiu's affirmation, Lingfeng wore the Black Dragon Flyer who had transformed into a manufacturing form and started the production of "Flying Armor No. 1" in the mini-manufacturing workshop.

The first is the manufacture of aluminum alloy armor for each part, then the circuit board, the operating system, and then the programming of the control chip, and the final assembly link.

Since this time it was no longer a semi-manual production using various tools, it took Ling Feng nearly an hour to complete the production of [Flying Armor No.

Looking at the nearly two-meter-high silver armor with turbo wings, Ling Feng felt a strong sense of pride in his heart. This was the first armor he made "by hand".

"Little Ball, activate [Flying Armor No. 1]."

For the experiment, Lingfeng installed a remote operating system on the prototype. As long as the prototype is assembled, Lingfeng can pass through the ball and manipulate it from a long distance. This is also proposed by Lingfeng for the safety of the experiment.

After all, this is the first trial, so it is not necessarily a bad thing to be cautious.

"Okay, sir."

After receiving Lingfeng's order, Xiaoqiu began to remotely activate the prototype of [Flying Armor No. 1].

"Drip, the Flying Armor operating system is starting up"

"The startup is complete, please instruct."

Standing next to the prototype, Ling Feng could clearly hear the electronic sound coming from it.

"very good."

Ling Feng nodded, stood a little further away, and then said to Xiao Qiu: "Little Qiu, let him move his limbs briefly to test whether the movement is smooth."

"Okay, sir."

After receiving Ling Feng's order, the ball began to control the simple activities of the prototype, such as waving hands, shaking the head, turning around, and taking steps.

The test process was very smooth, and the various movements of the ball transmission can be well completed by the prototype.

"Very good, let's go outside and try."

With that said, Ling Feng walked out of the manufacturing workshop, and the prototype of [Flying Armor No. 1] followed closely behind in the operation of the ball.

(End of this chapter)