universal repair shop

Chapter 49 The Oil Dragon Goes to Sea
"Start loading the picture scroll."

Tian Ze ordered.

"Drip! Start loading." In a burst of electronic sound, a holographic image appeared in the blue three-dimensional space of the PS system, which was the holographic image of the picture scroll on the table.The holographic image can be said to be a 100% copy of the scroll, even the individual ink dots on the canvas are presented without omission.

"Turn on the scan function."

Tianze then ordered.

Almost instantly, the ps system completed the scan "Drip! The scan is complete. The target is the picture scroll. There are a lot of foreign substances on the surface, accounting for 5% of the total volume of the picture scroll. It meets the requirements of the removal function. Do you want to enable the removal function of the system? "

With the end of scanning, the holographic image of the picture scroll changed immediately, from the original gray to black, green, and a little reddish.Green and red can be said to spread throughout the scroll, and green has an absolute advantage, which means that the scroll is not damaged much.

The distribution of black is much more interesting.

Completely coincides with the ink dot.

Tian Ze was not surprised at all, because black represents foreign matter.What is the foreign substance on the scroll?Of course it was the ink that was splashed on it later!

"Turn on!"

Tian Ze immediately said.

"Drip! Turn on the removal function, the removal progress is 1%, 2%... 99%, 100%, drop! The removal is complete, and the picture scroll has returned to its original appearance." In the cold electronic notification sound, the holographic image of the picture scroll began to change, attached Dots of black ink on the canvas began to disappear at a speed visible to the naked eye.

At the same time, the antique scroll on the table also began to change. The ink on the canvas was fading rapidly, and the original appearance of the antique scroll was revealed bit by bit.

From top to bottom, shocking.

First there is a blue sky and a red sun rising; then there is a sparkling sea covered with shimmering sunlight; then there is a row of maple trees, a train pulling oil tankers, and a group of off-duty people. A worker riding a bicycle home...

After more than ten minutes, Tianze came back to his senses.

Beauty, it is so beautiful.

This cliff is from the hand of the master!It's a pity that Tianze doesn't understand antiques!Naturally, it is impossible to recognize who painted it, but fortunately, the scroll has a seal as a guide.

Guan Shanyue!
It was easy to have a name, Tianze immediately turned on the computer, entered the word Guan Shanyue in Baidu, and a lot of introductions immediately popped up on the web page.Guan Shanyue, formerly known as Guan Zepei, was born in Yangjiang, Guangdong in 1912. He is a famous Chinese painter, educator, and representative of the Lingnan School of Painting...

Anyway, he is a fraudulent person.

The most important thing is that Tianze found the picture scroll.

"Oil Dragon Going to Sea", the painting was created by Guan Shanyue to experience life in Maoming Petroleum City, Guangdong. It fully embodies the innovative ideas of Chinese painting that Gao Jianfu admired in his early years.Guan Shanyue's most proud part of this painting is the sea water. In order to pursue the feeling of water waves shining in the sun, he repeatedly considered and tested different expressive effects.He also went to the street to carefully observe and sketch the workers on bicycles in the painting...

Tian Ze only glanced over these brief introductions.

Tianze's eyeballs were completely attracted by a series of numbers, 14950000 yuan, which is nearly 500 million!This is the transaction price at the spring auction in previous years.

"My darling, this is really a priceless treasure!" Tian Ze looked at the picture scroll on the table, his eyes were full of admiration, and Tian Ze finally understood Zeng Tianming's 'nervousness'.

Holding an antique worth tens of millions in your arms, how excited should you be?

"I didn't expect that he, a small antique dealer, could come into contact with such valuable antiques." Tian Ze muttered, and began to appreciate the tens of millions of scrolls.

But after watching it for a long time, Tianze found out helplessly that he has no artistic talent at all!The painting is very beautiful, but how beautiful it is, Tianze can't tell why.

Feeling bored, Amaze carefully rolled up the scroll and put it back in the wooden box.

Hiding the wooden box under the bed, Tianze opened QQ while eating roast duck and drinking beer.

Drip, drop, drop!

Just after logging in to QQ, an avatar flickered frantically.

Tianze saw that it was Ma Liang.

"Are you there?"

"answer?"

"Ah! If you don't answer any more, Grandpa Ma will get angry. Be careful and kill him in your lair."

"Come on! Afraid you won't succeed?" Tian Ze replied with a smile.

"Hey, it's finally online. I thought you ran away."

"Fuck off, what's the matter?" Tianze said unceremoniously, the two have been friends for more than ten years, so they need to be polite when they speak.

"Brother is getting married, when will you come back?"

"..." Tian Ze was stunned.

Is Ma Liang getting married?yes!They are almost 30 years old, isn't it normal to get married?
"Are you listening to me?"

"Listen..." Tian Ze said a little dullly.

"Hey, did you touch the pain in your heart? Let me tell you! You should hurry up and find someone to marry!"

"Fuck you, brother is a man." Tian Ze said angrily.

"It's all the same, all the same."

"Same as your sister!" Tian Ze sent a middle finger emoji.

No, a bad premonition suddenly struck.

At this time, the mobile phone next to him rang. Tian Ze picked up the mobile phone and looked at it, his face immediately turned pale. It really was the call from his mother Tang Xiuxiu!Amazawa pressed the answer button while thinking about countermeasures.

……

The next day, Tianze went to the repair shop first, and after a busy morning, he drove to Hongxing Machinery Factory after lunch.

"Leader, you're finally here! There are 400 valves in stock, and I'm so anxious." Just entering the No. [-] workshop, Ma Dalong greeted him and complained.

"Okay, okay, I have everything."

Tianze believed in himself.

"Okay! I have nothing to do with you, the valves are all placed here for you." Ma Dalong shook his head, and led Tianze to an empty area.I saw that the wooden boxes were neatly placed together, and the wooden boxes were not nailed on, so the situation inside could be seen clearly.

Each valve is placed in it.

There is also foam underneath.

"That's right, go and do your work!" Tian Ze nodded in satisfaction.

"You! Ask yourself to be blessed!" Ma Dalong left worriedly, obviously not optimistic about Tianze.

Tianze didn't take it seriously, and picked up a valve on his own, and came to a CNC machining center, which is a domestically produced three-axis three-linkage CNC machining machine tool.After placing the valve in the engine room, Tianze began to pretend to control it, but in fact it was just to cover up the ps system.

"System, load the workpiece into the machine tool." Tian Ze called in his heart.

"Drip! Start loading." In a burst of electronic sound, a holographic image appeared in the blue three-dimensional space of the PS system, which was the holographic image of the valve in the cabin.

"Turn on the scan function."

Tian Ze ordered.

Almost immediately, the ps system completed the scan, and the electronic sound rang again, "Drip! The scan is complete, and the target is a mechanical part."

"Compare with the previously loaded part drawings." Tian Ze continued to order.

"Drip! Start comparing."

"Drip! The comparison is complete. After comparing with the part drawing, the dimensional accuracy of the workpiece is IT8-IT7, and the surface accuracy is Ra0.5, which does not meet the requirements of the drawing at all. Do you want to activate the system's removal function?" It takes only three seconds, ps The system completes the comparison.

"On, manual mode."

Tian Ze immediately said.

"Drip! The manual mode is on." As the electronic chime sounded, hum!hum!hum!There was also a muffled sound from the CNC machine tool in front of Tianze, and the cutter in the engine room moved and began to cut the valve stuck in the fixture.

"You...how are you using this machine tool! Stop it quickly." An exclamation came from behind Tianze, and Ma Dalong ran over anxiously.

Ps: Thank you for the rewards of "Zhongli☆Looking for It", Xing'an Feixue in May, Wuhen of Heaven, Sun Moon * Guangjun with 100 starting coins, and it is said that you have given a reward of 500 starting coins. By the way, I would like to ask for a ticket.

(End of this chapter)