universal repair shop

Chapter 108 Retrofitting Equipment

After handing over the USB flash drive to Zhou Yu, Tianze didn't stay in the company much.

Immediately rushed to the factory in the LH area.

Boom, boom, in the distance, waves of roars were heard. When Tianze drove into the factory, what he saw was dusty, various engineering vehicles working non-stop and a large number of busy workers.

"Tian Dong, you are here."

"Tian Dong!"

As soon as Tian Ze got out of the car, two people came up to meet him.

It was Cai Yu and Li Yuanfang.

"Is everything going well?" Tian Ze nodded and asked.

"Tian Dong, don't worry if you entrust us with the work of Longxing Construction! We promise to complete the work within three months." Cai Yu promised, patted his chest.

"Then trouble Mr. Cai."

Tian Ze was satisfied.

"Tian Dong, now that the No. 1 factory building has been completed, do you think it's time to pay us part of the project fee?" Cai Yu hurriedly took the opportunity to say to Tianze.

"You talk to Mr. Li about this matter. As long as Mr. Li thinks there is nothing wrong with the No. 1 factory building, then he can ask Director Qiu to pay you." Tianze waved his hand in line with the principle of not being suspicious and hiring.

Besides, Qiu Xuejiao was still watching.

"Thank you Tian Dong, thank you Tian Dong."

Cai Yu said excitedly.

Now working, begging for money is a big trouble. Seeing Tianze is so easy to talk, how can Cai Yu be unhappy?Cai Yu obviously saw that Li Yuanfang had something to say to Tianze, so he resigned tactfully and went to work on his own affairs.

"Tian Dong, now that the No. 1 factory building has been built and the equipment has been installed, when will we let the workers go to work? Also, we have only recruited some skilled workers now, and there are still a lot of vacancies. Do we still have to go to the factory?" Can the talent market recruit some people?" As soon as Cai Yu left, Li Yuanfang asked after him.

"There is no rush to continue recruiting people."

Tianze said as he walked towards No. [-] factory building.

"Not in a hurry?"

Li Yuanfang didn't understand now.

Tianze asked Longxing Construction to work overtime within a month to complete the construction of No. 1 factory building. Now that the factory building has been completed and the equipment has been debugged, Tianze is not in a hurry to start construction. What happened?

"I asked Mr. Cai to work overtime to complete the construction of No. 1 factory building, not to start construction sooner." Seeing that Li Yuan's doubts became more serious, Tianze smiled and explained, "My real purpose is to build the factory building. equipment, let’s put it bluntly! I plan to upgrade this batch of equipment.”

"Equipment upgrade?"

Li Yuanfang shouted in surprise.

Although Li Yuanfang is a management talent, he has worked in Volkswagen for a long time, so he naturally understands what equipment upgrades are.To put it simply, it is to replace those outdated equipment with new equipment with more advanced structure, better technology, higher efficiency, better performance, and less energy and raw material consumption.

Now comes the problem.

The equipment in the factory is all high-end bearing production equipment that has just been purchased!It is obviously impossible for Tianze to replace the equipment he just bought, so what does Tianze mean?
Suddenly, Li Yuanfang thought of the machine tools in the workshop.

Is it...

"Director Tian, ​​do you want to modify the equipment yourself?" Li Yuanfang asked what he had in mind.

"That's right, I have this plan." Tian Ze admitted generously.

"Tian Dong, are you sure?"

Li Yuanfang swallowed and asked.

It's not like Li Yuanfang has never seen someone modify equipment by himself, but those are simple and low-precision equipment!How can it be compared with the high-end bearing production equipment in the factory?

The four growth lines cost 500 million yuan each, and the four growth lines cost 2000 million yuan.Among them, the four conveyor belts alone cost 80 yuan. If they are remodeled by Tianze...

"Don't worry! I'm sure."

Tianze smiled confidently at Li Yuanfang.

"Then do you need manpower? I can call the workers I have recruited to help you. They are idle anyway." What else could Li Yuanfang say?The entire factory belongs to Tianze. Since Tianze is not afraid of destroying the equipment, Li Yuanfang will naturally not talk any more.

"No, I don't like to be disturbed when I'm working." Tian Ze waved his hand.

"OK then!"

Li Yuanfang said helplessly.

At this time, the two also walked to the completed No. 1 factory building. The outer wall of the upper white and lower blue, and the arc-shaped roof looked very beautiful.Tianze did not open the gate of the factory building, but just opened the small door on the gate, turned to Li Yuanfang and said, "Go and do your work! I can do it alone."

Li Yuanfang nodded, turned and left the factory.

boom!Tian Ze closed the small door.

……

The entire factory building is divided into two parts by a wall. The first half is about 20 meters long and filled with various machine tools. Most of them are domestic machine tools, and only a few CNC machine tools are produced in Switzerland.

The second half is 60 meters long.

There are four production lines.

Cold rolling machine, automatic ball bearing internal grinder, quenching line, annealing furnace, press, CNC lathe, bearing grinder, inner groove grinder, outer groove grinder, high precision horizontal axis circular table surface grinder, CNC milling machine, centerless grinder, high Precision through-grinding centerless grinder, precision channel ultra-finishing machine, inner surface CNC grinder, CNC reciprocating double-face grinder, high-temperature and high-speed bearing testing machine, heat treatment production line, etc.

Tianze bought German products.

High degree of automation.

By replacing people with machines, what originally required 12 workers, now only needs 4 workers, and the precision of bearing grinding grooves can be greatly improved.

Of course, the more important reason why Tianze buys expensive German products is that the German products are of good quality and can fully withstand the transformation of the PS system.

That's right, it was the ps system that Tianze dared to guarantee to the major general to produce top-notch bearings.Tianze's idea is to use the removal and repair functions of the PS system to continuously correct the accuracy of the production line, so that the accuracy of the production line can reach an unprecedented level. Are you afraid that you will not be able to produce good bearings?

As soon as he thought of it, Tianze pulled the switch.

……

Bearing production is actually a process from inside to outside, from rough to fine, and from near to far.

To be simple, it can be divided into three parts: the production of steel balls, ferrules and cages.

Tianze intends to use the ps system to modify the equipment. Naturally, it is impossible to modify all the equipment at once, but to modify one device after another.

The first thing to be modified is naturally the cold rolling machine.

The forging of the cold rolling machine is an important link to ensure the reliability and life of the bearing, and it will also directly affect the utilization rate of raw materials, thereby affecting the production cost.

With the operation of the cold rolling machine, Tianze summoned the ps system.

"System, load this machine."

"Drip! Start loading." In a burst of electronic sound, a holographic image appeared in the blue three-dimensional space of the PS system. It was the cold rolling machine at work, and the process of pressing the material into a ferrule was exactly the same. .

"Turn on the scan function."

Tian Ze ordered.

After about 1 minute, the ps system completed the scan, and the electronic sound rang again, "Beep! The scan is complete, the target is mechanical equipment, and the equipment damage rate is 0.5%. The main damage location is the base, and other damage..."

"Turn on the perspective function."

Tianze continued.

"Drip! The see-through function is on."

Wow!With the electronic sound, something magical happened.The holographic image of the cold rolling machine began to fade, and the internal structure gradually appeared in Tianze's eyes.Like a woman who has taken off her clothes, there is no trace of obstruction, no trace of mystery.

All the working process of the cold rolling machine is clearly shown.

At this time, a ferrule has just been processed by the cold rolling machine.

"Compare the produced parts with the previously loaded part drawings." Tian Ze continued to order.

"Drip! Start comparing."

"Drip! The comparison is complete. After comparing with the part drawing, the dimensional accuracy of the workpiece is IT10-IT9, and the surface accuracy is Ra6.3, which does not meet the requirements of the drawing at all. Do you want to activate the system's removal function?" It takes only three seconds, ps The system completes the comparison.

Looking at the results of the comparison, Tian Ze was not a bit surprised.

Because the parts drawings provided by Tianze are the dimensions of the parts when they are finally formed, there is naturally a huge gap between the initially formed ferrule and the parts drawings.

Ignoring the ps system, Tianze focused on the holographic image of the cold rolling machine...

Ps: Thank you for the reward from "People ☆ Find It" and Xing'an Feixue in May.

Ask for recommendations, ask for rewards.

(End of this chapter)