back home as anchor

Chapter 425 Ability of Senior Mechanical Design Master

Luo Qingquan smiled wryly, "Brother Guang made a joke!"

"What's so funny about this, everyone can quarrel over design issues, which shows that everyone is responsible for their work!"

Luo Qingquan pushed the door open and walked into the office.

Seeing Luo Qingquan enter the door, all the R&D personnel in the office shut up.

Liu Xiaoguang followed Luo Qingquan into the house.

"You are busy with your work, don't worry about me!" Luo Qingquan gave up his seat to Liu Xiaoguang.

The two found a seat and sat down.

Luo Qingquan gave Liu Xiaoguang a design drawing.

"We have tried it before, and changing the ratio of fuel supply to the injectors does not increase the efficiency of the engine at all."

"That's because the fuel supply ratio is not mixed enough with the air. In my opinion, I still have to make a fuss about the intake pipe!"

"The position of the intake pipe will not be a problem. The previous engine, the intake pipe was designed like this!"

……

Everyone is still arguing.

Luo Qingquan couldn't understand what they were saying, but just found it annoying.

Liu Xiaoguang carefully looked at the design drawings in his hand.

As Liu Xiaoguang scanned the drawing, the picture on the drawing turned into a three-dimensional pattern, which appeared in Liu Xiaoguang's mind.

Not only that, Liu Xiaoguang's thinking began to simulate the operation of the engine.

This situation surprised Liu Xiaoguang.

Before, Liu Xiaoguang could only present the three-dimensional graphics of the engine in his mind, based on his experience, to judge the design of the engine and where there were problems.

At this time, Liu Xiaoguang's ability has been further improved than before.

Liu Xiaoguang knew that this should be due to his status as a senior mechanical manufacturing master.

Such a situation made Liu Xiaoguang's inspection of the engine more convenient.

Liu Xiaoguang began to simulate the operation of the engine according to the joy in his heart.

The engine is running, and the picture is clear. Liu Xiaoguang is like a doctor, dissecting the engine, and the internal structure and operation process of the engine are all clearly displayed in front of Liu Xiaoguang.

Liu Xiaoguang quickly noticed that there seemed to be something wrong with the position of the nozzle.

Although the engine was running smoothly, the position of the nozzle was obviously a bit slow in response.

Liu Xiaoguang soon realized that there was a problem with the position of the nozzle

Things progressed far better than Liu Xiaoguang expected.

Liu Xiaoguang originally thought that it would take at least a few days to compare the engine problems.

However, at this time, Liu Xiaoguang, relying on his status as a senior mechanical design master, quickly discovered the problem.

Liu Xiaoguang raised his head from the drawing.

Developers are still debating.

"There should be a problem with the position of the nozzle in the design of this engine." Liu Xiaoguang spoke in a low voice, but the R&D personnel who were arguing could hear clearly.

Everyone stopped arguing and looked at Liu Xiaoguang in unison.

"This brother has good eyesight!" The R&D staff who said before that there was a problem with the position of the nozzle happily gave Liu Xiaoguang a thumbs up.

"Your statement is too arbitrary!" Others frowned and looked at Liu Xiaoguang.

Most of these R&D personnel were newly recruited by Luo Qingquan and did not know Liu Xiaoguang.

If Liu Xiaoguang and Luo Qingquan hadn't entered the door together, the relationship between the two was unusual, this person would not have talked to Liu Xiaoguang so calmly.

"There is nothing wrong with the position of the intake pipe, as well as the temperature and pressure. If you don't believe it, you can re-adjust it, but it will have little effect on the performance of the engine!" Liu Xiaoguang said calmly.

"That's right, that's what I said. It must be that the nozzle's oil output ratio is wrong. Insufficient combustion will cause the engine's performance to fail to meet the standard!"

"It's not a question of the ratio of gasoline!" Liu Xiaoguang's words made the smile on the face of the guy who gave Liu Xiaoguang a thumbs up before disappear.

"How can you talk so out of breath!" the man said angrily.

Liu Xiaoguang doesn't care about the attitude of these R&D personnel.

Most of these technicians have such a temper. In their eyes, they only have technology, and they don't understand the world at all.

Only such a person can become an excellent technician.

Liu Xiaoguang spread the drawings on the table, and everyone gathered around.

"The biggest problem with the design drawings is the nozzle. Please take a look at it. Above the nozzle, the distance between the intake pipe and the nozzle is too close. When the engine starts to work, the position of the nozzle will inevitably move slightly. At this time, the intake pipe will block the movement of the nozzle, causing the amount of gasoline released by the nozzle to deviate!"

Liu Xiaoguang explained to everyone.

"This……"

Everyone didn't know what to say for a while.

According to their experience, they can feel the belt, so what Liu Xiaoguang said should be correct.

"You're right, but how can we prove it?"

"That's right, the position of the intake pipe must not be moved. If the position of the intake pipe is moved, the entire engine needs to be redesigned!"

The design of the engine is very complicated.

I want to properly place all the parts of the engine in a limited space.

The position of each component cannot be changed at all.

Otherwise, the operation of the engine will definitely be affected.

"There is no need to change the position of the intake pipe!" Liu Xiaoguang said with a smile.

"Do not change the position of the intake pipe? Then how to adjust it?"

Everyone had puzzled expressions on their faces.

Why is this guy talking in a daze? He just said that the position of the intake pipe prevents the movement of the fuel injector.

Now it is said that there is no need to change the position of the intake pipe.

Then how to adjust?

"Just reduce the diameter of the intake pipe by one centimeter! The gas volume required by this engine is about one liter per minute, and the current intake pipe is a bit too thick!"

The data that Liu Xiaoguang casually reported shocked these designers.

This guy just got the design drawing of the engine, and he was able to accurately tell the air intake data of the intake pipe in such a short period of time.

This ability really made them feel unbelievable.

Hearing what Liu Xiaoguang said, these designers no longer have any doubts.

Obviously, Liu Xiaoguang is a very knowledgeable person.

"Brother Guang, you're amazing!" Luo Qingquan was always there, quietly listening to Liu Xiaoguang's words.

At this time, I saw the expressions of surprise on the faces of these designers.

Luo Qingquan knew that what Liu Xiaoguang said must be correct.

Otherwise, these designers with sky-high eyes would have scolded Liu Xiaoguang long ago.

How could he listen to Liu Xiaoguang so obediently.

"Then according to Brother Guang, modify the method and see if it can improve the performance of the engine!"

Finally, Luo Qingquan made a final decision.

The R&D team of Beichen Automobile began to change the engine design according to Liu Xiaoguang's request.

(End of this chapter)